129,524 used machines on RESALE, but how to find them? Machine Search
Hydraulic Press Emanuel 500 ton press Year of construction: 1976 Dimension table: 2500 x 1900 mm Light max: 1490 mm Light min: 550 mm Slide stroke: 940 mm Cushion stroke: 400 mm Side upright clearance: 900 mm
turning diameter over bed: 1020 mm turning diameter over slide rest: 660 mm turning length: 5000 mm min./max workpiece dia.: 210 - 880 mm spindle diameter: 115 mm spindle taper: 140 spindle turning speed range: 5 - 500 U/min feeds - longitudinal: 0,20 - 3,05 mm/U feeds - cross: 0,07 - 1,04 mm/U slide adjustment: longitudinal: 5000 mm cross: 680 mm workpiece weight: 5000 kg main drive motor: 22 kW thread - mm pitch: 1 - 120 mm thread - module: 0,5 - 30 thread - inch: 28 / 1/4 spindle bore: 84 mm tail stock: tailstock quill taper MT: 5 tailstock quill stroke: 300 mm total power requirement: 27 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: 6,5 x 2,2 x 1,8 m - 1 fixed bezel - Faceplate Ø 1000 mm - 4-fold steel holder - Tailstock - 2-track bed design The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Werner & Pfleiderer dough divider/weigher 1 or 2 chamber machine (depending on weight) Weight ranges: approx. 300 - 2,600 g/piece (1 chamber) approx. 150 - 1,200 g/piece (2 chambers) Output up to 3,200 pieces per hour (2 rows) with TOUCH control with digital hour counter with lubrication with extended hopper for approx. 200kg dough Suitable for a variety of doughs: Wheat doughs, mixed doughs, grain doughs, whole grain doughs, firm doughs (e.g. pizza), soft doughs (e.g. baguettes, etc..) Dimensions: 220x170 H:190cm - Tested and cleaned
turning diameter: 2000 mm turning length: 5000 mm turning diameter over slide rest: 1050 mm turning diameter over bed: 2000 mm faceplate diameter max.: 1200 mm spindle turning speed range: 1,6 - 250 U/min main drive motor: 110 kW max. workpiece weight between centres: 25 t workpiece weight max.: 40 t centre height: 700 mm swing diameter max. over bed cover: 1140 mm max.workpiece weight:each extra steadyrest: 3000 kg total power requirement: 120 kW weight of the machine ca.: 55 t dimensions of the machine ca.: - m - Face Plate Ø 1200 mm - Coolant - Rapid travel - Tail stock mit Face Plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible.
: 1500 mm tank diameter / tank height: 1500 / 500 mm turning speed range: 1500 U/min voltage: 380 V power requirement: 18 kW volumn: 300 Liter weight of the machine ca.: 1,2 t dimensions: 1,5 x 1,6 x 1,6 m Vibration dryer See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width - max.: 1010 mm plate thickness: 4.0 mm ST plate thickness: 2.5 mm VA plate thickness: 6.0 mm ALU number of strokes - loaded: max. 20 Hübe/min cutting angle: 1.5 ° work height max.: 900 mm Control: ELGO total power requirement: 5.5 kW weight of the machine ca.: 2200 kg. from a maintenance workshop good condition () Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge Includes NC ELGO positioning control TYP 85 - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions Special accessories included: - Pneumatic holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WR FEEDER LABEL 500L, DEMONSTRATION SYSTEM - Technically overhauled and cleaned by the manufacturer!, - Friction feeder with 500 mm product width in the long version, - Encoder kit 1000 pulses, - ALTECH labeler, - Control system for ALTECH, - Automatic delivery with programmable descent, - Stand with H-base on casters, WR FEEDER LABEL is a system for separating and labelling cartons and bags. The encoder enables perfect synchronisation between the removal speed and the output speed of the labels, guaranteeing high accuracy when applying the labels.
Specifications Maximum pressure: 4 tons Press force: 1.14 kg/cm² Bale size: 700x500x600 mm Bale weight: approx. 60 kg Power connection: 230V / 1.1 kW Year of Make: 2012 Productivity: approx. 3 bales/hour Price: on request Machine is fully functional after technical supervision. If you have any questions, please call us: +48 696 072 985
Komptech Crambo 5200 Direct Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447184 Power: 328 kW/446 hp Weight: 26 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: 3-axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)
Komptech Crambo 5200 Direct (New) Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447242 Power: 328 kW/446 hp Weight: 27 300 kg Emission class: Tier 4 Final / Stage V Equipment and description: 4472423 Axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)
An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.
Komptech Terminator 5000 SD Category: Garbage Shredders Specification: Category: Universal Waste Shredder Serial / reference number: 481148 Power: 446 hp / 328 kW Weight: 27 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-Crushing Unit Armoured rollers – new Sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control
ZERMA PM 500 PVC PULVERIZER, average throughput rate 500 kg/h, Disc diameter: 500 mm, 24 kW drive, Total installed power: 79 kW (200 A), including metal detector, Vibrating screen, 2-place big bag filling station, Loading screw and cyclon, Centralized dust extraction system Donaldson TDS8 year 2018, N.2 new spare discs, Complete valve and piping system, Test possible, installed power - used power in work: about 60-65% : 79 kw, conditions: testable
- 3 Guide ways construction - Double V Prima guide ways - Steady rest 600 mm - Steady rest 7800 mm - 4 Chuck 800 mm - Oil Country 160 spindle bore - Optional Larger chuck up to 1500 mm
Lippert belt conveyor riser with arch GF 15285-550-400 RA1664 Technical data: Conveying length (NL): 15285 mm riser and bow Frame width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): 0.3 Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Optionally available: Supports Side guide one and both sides feed belt/lead belt frequency converter for stepless speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 15285 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: 0,31 scope of deli ...
Lippert belt conveyor GF 14590-550-400 RA1753 Technical data: Conveying length (NL): 14590 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 14590 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individ ...
Lippert belt conveyor GF 8260-550-400 RA1621 Technical data: Conveying length (NL): 8260 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 8260 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...
Lippert belt conveyor GF 7620-550-400 RA1681 Technical data: Conveying length (NL): 7620 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 7620 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...
Key data: 510 mm, 1100 mm
Year of construction 2010 Turning length 1000 mm Turning diameter bed Ø 510 mm Turning diameter carriage 300 mm Spindle bore 80 mm Power spindle 16 kW Bed width 330 mm Quill 75 Ø Jaw stroke 160 mm Spindle mount 5 Mk Speed 2500 rpm Feed X - axis 8000 mm/min. Feed Z-axis 8000 mm/min. Length 3200 mm Height 1800 mm Width 1800 mm
DUAL-SHAFT HYDRAULIC MULTI-PURPOSE PRIMARY SHREDDER, Loading hopper, bespoke to project and feeding system, Sturdy supporting structure in carbon steel height 2 mt from floor, with catwalk and rails, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Knives : 75 or 100 mm thick 4 hooks or bespoke, Hydraulic motor 75 kw, 400 V/50 Hz, hydraulic power unit,, electrical control panel with PLC and connection for remote assistance, automatic overload reversal with programmable number of reverse cycles, Delivery : about 4-5 months from confirmation (excluding Winter/Summer holidays), Complete with electrical drawings, User manual, CE compliance, Possible addition of loading and extraction belt with metal separator, width: 1.500 mm, Power: 75 kw
A Euromac doctor rewinder for unwinding and rewinding web materials on rolls is available. Web width: 450mm, max. speed: 400m/min, materials: paper/aluminum/composite materials, material thickness range: 30µm-100µm, max. parent roll diameter: 520mm, max. roll weight: 100kg, max. rewind diameter: 520mm, max. core/adapter inner diameter: 76mm/120mm. Including Häwa water cooling, floor scanner, and side safety fence. Documentation available. An on-site inspection is possible.
sheet width: 4040 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: m Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal support Side fence and table extensions Cut length limiter Cut edge lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
REF-2704 LLEAL MAX-MIX MM-500 VACUUM MIXER FOR LIQUID AND VISCOUS PRODUCTS Manufacturer: LLEAL Model: MAX-MIX MM-500 Year: 2000 Machine no.: 14890 Series: 3712 Electrical specifications: 49.8 kW/380 V/104 A/3+N+E/50 Hz Dimensions (in mm): See the drawing in the last picture. MAX-MIX MM-500 mixing, dispersion, emulsion and homogenisation system. The MAX-MIX processor is a multifunctional piece of equipment ideal for manufacturing liquid and viscous products that require dispersion, homogenisation and emulsion stages (in both solid/liquid and liquid/liquid processes) and that also require a complete deaeration, which is possible thanks to the internal vacuum circuit. The process can also include the heating or cooling of the products during their manufacture, the addition of solids and liquids in vacuum conditions, and the recirculation and discharge by positive displac ...
Krpan 4.5 E forestry winch, shield width 1.42m, pulling force 45 kN (4.5t), braking force 56 kN, 70m à 9 mm compacted rope, rope speed 0.6 m/s, weight without rope 350 kg, ! Required tractor power: 35-45 kW / 48-60 HP
Schäffer 5470Z wheel loader, Technical data:, - Year of construction: 2022, - Operating hours: 450h, - Operating weight cabin with standard equipment, driver and standard bucket: 5,215 kg, - Lifting capacity: 3,600 kg, - Flow rate / option: 64 l/min / 74 l/min, - Pressure: 210 bar, Equipment:, - volume scoop, - pallet forks, - hydraulic quick coupler, Dimensions [see image in attachment]:, - (A) Wheelbase: 2,050 mm, - (B) Chassis length: 4,700 mm, - (C) Total length with standard bucket: 5,250 mm, - (D) Digging depth: 80 mm, - (E) Working height max.: 3,900 mm, - (G) Loading height with pallet forks: 3,120 mm, - (H) Max. discharge height: 2,500 mm, - (I) Height of front end: 1,530 mm, - (J) Dumping range: 420 mm, - (K) Seat height: 1,340 mm, - (L) Height cabin / option: 2,570 / 2,450 mm, - (M) Lifting height (tool pivot point) max.: 3,250 mm, - (N) Total width series / option: 1,740 - 1 ...
50 cm width, receiving width: 20.5 cm, shaft spacing: approx. 20 cm, shaft diameter 40 mm
Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting
Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.
x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paint Mixer Olbrich RM 501; cleaned and tested; suitable for 0.5 to 10kg cans. Ink mixer Olbrich RM 501; cleaned and checked; used for 0,5 till 10kg cans.
Impressions=0 m, Condition= Good , Availability= 2025-11-03, Pile turner Max weight 500kg Top working condition
A VICTOR lathe 500x1000. Distance between centers: 830mm, center height over bed: 250mm, max. turning diameter: 500mm, longitudinal travel: 800mm, spindle bore: 80mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1200mm, weight: approx. 1500kg. An inspection can be arranged by appointment.
1 gebr. Boiler ------------------------------------ - mounted on frames - Manufacturer : LOOS, International Type : UL-S Capacity : 5,000 kg/h Operating overpressure : 18 bar Steam temperature max. : 204°C Year of manufacture : 1993 equipped with Weishaupt gas burner G50/2-A, ZM, gas control section, separate control cabinet, feed water pump, and the existing coarse and fine fittings.
HUGO BECK high-performance shrink tunnel type SLB 5012/25, pass-through width: 500mm, pass-through height: 230mm, tunnel hood length: 1200mm, working height: adjustable from 850mm +/- 50mm, maximum temperature: 250°C, rod chain conveyor infinitely adjustable from 5 to 30m/min. Inspection possible by appointment.
new
New Part Number: 0209 2231 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife
new
New Part Number: 0209 2230 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Used cheese-making kettle with a capacity 5000 liters, manufactured in Finland. Stainless steel.
Injection moulding machine for food and beverages caps
Clamping Force: 200 ton
Injection moulding machine for PET preforms
Screw Diameter: 50 mm // Throughput: 150 kg/h
Container Size (Max.): 2,5 l
A Hamba cup filling machine is available. Lanes: 4, max. cup diameter: 127mm, max. cup height: 130mm, nominal capacity: 9600cups/h. Machine dimensions X/Y/Z: approx. 10000mm/1700mm/2500mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible.
PROCESOR ECO LOG MODEL 580F BUILT IN 2021 OPERATING HOURS 1100
Part Number: 7781 SPECIFICATIONS - Maximum milling height 216mm - Maximum milling depth 65mm - the largest cutter diameter is 250mm - spindle working length 500mm - spindle rotational speed 4600rpm - spindle diameter 40mm - max tool diameter 250mm - worktop length/width 890x400mm - 11kW motor - 2 material clamps – pneumatic - air demand 6-8 bar - diameter of the extraction port 160mm - dimensions l/w/h 1330x1200x1470mm - weight 970kg ADVANTAGES – Polish production – unpainted – used milling machine, very good condition Net price: 38900 PLN Net price: 9262 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)
Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg
maximum number of results exceeded
please refine your search
