126,618 used machines on RESALE, but how to find them? Machine Search
Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fram ...
DUE TO NEW ENGINE THIS VERY WELL FUTILIZED DEUTZ DRIVE ENGINE FOR SALE
Transnorm conveyor belt GF 8500 -600-500 RA2088 Technical data: Conveyor length (NL): 8500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 8500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...
Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment -Measuring range: 0-500 mm -Dimensions: 670/185/H13 mm -Weight: 1.4 kg
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm angled infeed outfeed rejector inlet roller conveyor 45°/90°-600-500 RA2033 Year of manufacture: 1995 discharge angle: 45° + 45° curve Nominal/external width (NB): 600 mm Useful width (NUB): 500 mm Conveyor speed: 0,68 m/s Roller diameter: 50 mm steel + conical plastic coated rollers Drive: SEW gear motor with brake Electrical data: 0,37 kW, 380-480 V center distance: 75 mm Height: 120 mm, 375 with motor Optionally available: Supports Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) angle: 45°, 90° Construction year: 1995 nominal voltage: 380-480 V Nominal / outside width in mm: 600 Roll width in mm: 500 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,68 scope of delivery: without supports and side guides For ...
Vernier caliper, caliper, vernier caliper -Manufacturer: Mauser, calipers, vernier calipers -Measuring range: 0-500 mm -Vernius: 0.05 mm -Dimensions: 655/157/H11 mm -Weight: 1.0 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg
SBF grading machine model 3W-586 1100mm with 3 belts: - 1st roller belt D=150mm in 90 shore rubber - 2nd roller belt D=200mm in 65 shore rubber - 3rd roller belt D=200mm in 45 shore rubber - pneumatic on/off of the 3 rollers, from the control panel - Rubber pressure rollers - automatic table positioner, with digital reader - Feed mat in good condition - 2 belt feed speeds - front and rear roller conveyor - total installed power KW 24 , volt 380 - year 1997 , CE standards AVAILABILITY FROM APRIL 2024
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg
Used stainless steel belt press made by Flottweg model B-FRU-500 made in 2010. Capacity 500-2000 kg/h. The press includes pulp pump, circulation pump, wash water screen, pressure pump, juiice pump, stationary juice screen, control panel, piping.
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tool, step claws, low clamps, clamping irons, clamping brackets -Clamping tool: clamp -Shaft: Ø 40 mm -Dimensions: see photos -Total dimensions: 505/100/H145 mm -Total weight: 12.7 kg
Console, device, clamping angle, clamping table, clamping plate, support console -Support consoles: 2 pieces, from press brake Promecam STPC 250 40 121 -Support table extension: adjustable in height -Dimensions: 515/300/H785 mm -Transport dimension: 840/540/H310 mm -Total weight: 56 kg
Used vertical stainless steel tank, 5000 L volume. Tank with frame agitator and jacket (cooling-heating).
Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.
Three-phase motor, electric motor -Manufacturer: Kobold, electric motor type KOD 566 -Power: 0.18kw -Speed: 920 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Dimensions: 205/175/H130 mm -Weight: 5.5kg
Servo drive, controller, converter, controller, controller adapter base -Manufacturer: Siemens, Controller Adapter Base Series 500 -Type: 500-5840 -Dimensions cardboard: 500/250/H180 mm -Total weight: 2 kg
Key data: 1500 kN, 487 g/PS
Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No
PLC controller, Siemens Simatic Net CP Profibus, communication processor Manufacturer: Siemens, Simatic Net CP Profibus Ovp -Type: 6GK7 342-5DA02-OXEO CP 342-5 S7-300 Profibus 12MBAUD -Number: 2x Profibus available -Price: per piece -Cardboard dimensions: 150/130/H50 mm -Weight: 0.3 kg/pc.
Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10
PLC control, central module, main memory, CPU, central device, central processing unit, compact device, compact CPU -Manufacturer: Siemens, compact CPU Simatic S7-300 -Type: 6ES7 313-5BF03-OABO -Number: 1x module available -Price per piece -Dimensions: 120/115/H125 mm -Weight: 0.8 kg/pc.
PLC control, digital input, digital input, electronic module, digital input module -Manufacturer: Siemens, Simatic ET 200SP digital input module -Type: 6ES7 131-5RDOO-OABO -Number: 1x module available -Price per piece -Dimensions: 80/30/H90 mm -Weight: 0.1 kg/pc
Planetary stirrer Sinmag Model: SM2-500C sophisticated, robust technology ... Proven many times over! Mixer with simple manual operation Powerful 3-speed gearbox 1 stainless steel boiler 40 liters 1 flat stirrer 1 dough hook 1 broom Boiler Protective Grille / Encroachment Protection Floor-standing machine with boiler stroke DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug NEW Machine with 24 months warranty TOP quality and price in one machine! Your partner with the extra bit of service!
Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output -Manufacturer: Siemens, Simatic S7 analog output -Type: 6ES7 332-5HD01-OABO -Number: 1x module available -Dimensions: 115/40/H125 mm -Weight: 0.2 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Photo: Short cone 11 -Bolt circle: Ø 235 mm -Through hole: Ø 140 mm -T-slot: Slot width 22 mm -Weight: 109 kg
Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30
Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm
Product Identifier: FVB-1, 2400 dpi, Fiery EXP50 RIP, Speed: 50 Pages/Minute, Resolution: 600x600 dpi, Paper Capacity: Dual 2000 Sheet Paper Drawer
Semiconductor relays, switchgear, switching components, semiconductor contactor -Manufacturer: Mosca, solid state relay AND gate -Type: ME 5499 AND gatter -Dimensions: 55/20/H75 mm -Weight: 0.1 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg
Transnorm conveyor belt GF 2600-600-500 RA2237 Technical data: Conveyor length (NL): 2600 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s ...
Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Fette, shell end mill with longitudinal groove -Type: Fette 50 x 25 H Sp 588 -Intake: with fitting groove -Cutting material: HSS -Dimension: Ø 50 x 25 x 22 mm -Weight: 0.2 kg
- Atmospheric pressure - Tanks for the fermentation and storage of wine or beer - Dome 400 mm stainless steel AISI 304 - Nitrogen connection with stainless steel ball valve 3/8" - Cleaning pipe with DIN 32 connection - Cleaning ball Ø 65 mm AISI 316 stainless steel - Level indicator with return flow into the tank - Taster - Bottom conical 30° - Residual drain butterfly valve DIN 25 - Clear drain butterfly valve DIN 25 - Bimetal thermometer in stainless steel -20 °C/+80 °C with 200 mm long shaft - 3 adjustable stainless steel feet - Dimensions: Ø 800 x 1950 mm (h) - Mirror polished inside, marbled outside
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paper Cutting Machine EBA 551-06 LT Year of manufacture 2009 Price 4800 Euro FCA Essen
Transnorm conveyor belt GF 2670-600-500 RA2068 Technical data: Conveyor length (NL): 2670 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/Th Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2670 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0 ...
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 nominal voltage: 230, 380-500V Conveying length in mm: 2400 Nominal / outside width in mm: 1300 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SE ...
Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm -Weight: 98 kg
Data light barrier, reflective light barrier, light barrier -Manufacturer: Visolux, data light barrier type LS 500-DA-IBS/F2 -12-30 V DC -Quantity: 3 pieces available -Price: per piece -Dimensions: 250/120/H140 mm -Weight: 2.1 kg/piece
Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A4 242485 -Control range: 0.1 - 0.5 bar -Pmax.: 2.0 bar -Dimensions cardboard: 75/70/H80 mm -Weight: 0.4 kg
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: VMPA1-M1H-NP Mat. no. 533348 S302 -PN: 3 - 10 bar -Dimension: 110/40/H15 mm -Weight: 0.1 kg
Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.
Used GANDRA TEC 500 + Bag-in-Box filling machine: 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit and vegetable juices, wines, etc. Supported packaging: 3 l, 5 l, 10 l, 20 l. The bags are introduced automatically from a belt or manually. Vacuum generation and nitrogen injection after pouring are standard. Equipped with a filled bag counter and a liter counter. Filled bags are collected manually in machines. Producer: Gandra Model: TEC 500+ Year of production: 2017 She recently poured NFC apple juice Capacity: Up to 500 3 liter bags per hour • Power supply 400V/50Hz; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW 2 pcs available
Lippert belt conveyor ascending belt GF 4920-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4920 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Dri ...
Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels ( 400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x Shelf stand, used Material colour: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Stand height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 02x Footplates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf trusses, used Material color: orange Truss Type: PNBH0488 Box profile: 80 x 50 mm Clear width: 1,350 mm 16x Locking pins, used Finish: sendzimir g ...
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: cast iron -Holes: Ø 25 mm -Dimensions: 505/200/H150 mm -Weight: 30 kg
Used line for processing green bean by Femia. New 2007. capacity: 5000 kg/h. The line consists of: 1. Descaler. 2. Rinser. 3. Rod splitter. 4. Rod cutter. 5. Aerator. 6. Vibrating distributor. 7. Bean tip cutters. 4 pcs. 8. Conveyors.
Key data: 500 mm, 350 mm, 250 mm
Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 500 mm, height 500 mm -Wall thickness: 27 mm -Grooves: 80 x 26 mm -Dimensions: 500/500/H500 mm -Weight: 121 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 525 mm, height 500 mm -Wall thickness: 25 mm -Grooves: 175 x 30 mm -Holes: Ø 25 mm -Dimensions: 500/525/H500 mm -Weight: 124 kg
maximum number of results exceeded
please refine your search
