127,905 used machines on RESALE, but how to find them? Machine Search
Year of manufacture 2019, top condition, only approx. 300 hours Machine housing: solid stainless 2 rotation directions Emptying by hydraulic tilting of the mixing trough Membrane keyboard with plain text display in German Automatic mixing time preselection Control cabinet built-in, main switch Microprocessor Control (PLC) Mixing speed speed: infinitely variable Mixing tank: 500 litres Motor power 7.5 KW / voltage 400V / 50Hz Incl. MA 20 automatic mixing: for up to 20 programs (forward/backward/pause/total time and mixing speed speed) Incl. Z-mixing arms instead of paddle shafts Incl. protective grille: welded construction made of stainless steel, hydraulically operated Incl. 2 operating instructions with machine With mast feeding system BA24 Hydr., stainless, for standard wagons
Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg
Freezer trolley stainless steel with 20 editions for 58x78cm sheets incl. 19 sheets 58x78cm teflonized Dimensions of the car: Height: 180cm Width: 65,5cm Depth:80cm
We sell 1 x IBM DS8910, 5333-994 disk storage system In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all ...
Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg
The machine is in good technical condition, after prior agreement possible to test. Control system – Siemens Including filtration. Bed inclination Bed material Number of guides 45 cast iron 3 (4 with Y-axis option) WORKING SPACE (V1- V4) Swing diameter over bed inch 19.69 Swing diameter over cross slide inch 11.42 Largest turning diameter inch 7.87 200 ч Distance between centers inch 30.71 Largest turning length inch 19.69 15.82 20 Max. weight of flying unsupported part of workpiece lb 35 Max. distance of center of gravity of flying unsupported part of workpiece inch 165 from spindle face Max. workpiece weight clamped between centers lb 100 X-axis travel length inches 7.48 Y-axis travel length (OР.) inches 3.14 (+/- 1.57) Z1-axis travel length inches Z3-axis travel length inches Spindle axis height above floor inches 20.67 21.65 39.26 (38.77+1.18) MAIN SPINDLE Spindle face (flat face ...
Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes
used
RECON Part number: 0200 6786 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
USED STERLING SIHI GMBH ZTNC 50200 AA 002 1B 2 CENTRIFUGAL PUMP
; Gross weight [kg]: 4950; Engine: Cummins QSZ13-G3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant Heater and Battery Charger; Water Tank Volume [l]: 775
Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.
Laboratory Centrifuge from Eppendorf Operational
; Gross weight [kg]: 4100; Engine: Volvo TAD1345GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515
Moog Servo Valve Unit D665-5703 & D661-5623C High Performance Valve Module For sale is a fully functional, industrially used high-performance servo valve unit from MOOG, consisting of two perfectly matched valves Also available as a single component ! Moog D661-5623C – High-Response Valve Technical Property Value Model name: D661-5623C Type code G18H0A0NSA0HP Valve type 4-way, 2-stage with bushing slider Nominal volume flow 120–200 l/min (depending on version) Operating pressure P, A, B max. 350 bar Return pressure T (internal) 210 bar Return pressure T (external) 280 bar Control pressure 25–350 bar Coil stroke ±0.13 mm Control surface (AK) 1.35 cm² Actuation time (0–100 %) approx. 14 ms Hysteresis < 0.6% Zero displacement < 1% Supply voltage ±15 V DC Input signal ±10 V IP65 protection Mass approx. 5.7 kg Connection diagram ISO 4401-05-05-0-94 ...
; Gross weight [kg]: 4600; Engine: Hyundai DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
ACCUTEX AU-500iA wire EDM was built in 2007 in Taiwan by ACCUTEX TECHNOLOGIES CO., LTD. The machine uses advanced electrical erosion technology for precise, 5-axis machining of workpieces with a maximum weight of 400 kg. This method enables difficult shapes to be achieved in even the hardest materials. The need for other secondary processes, such as polishing, is also minimised or completely eliminated. All this makes the offered AU-500iA wire EDM machine the best choice for the production of e.g. dies, tools and punches. The total weight of the machine is approximately 3500 kg. Technical specifications of the ACCUTEX AU-500iA wire EDM - CNC controller - number of axes: 5 (X,Y,Z,U,V) - feed in the X/Y/Z axis: 500/300/300 mm - feed in the U/V axis: 100/100 mm - maximum workpiece weight: 400 kg - maximum workpiece dimensions (L x W x H): 990 x 560 x 295 mm - cutting angle: ±22.5 ...
Make: ISHIKA WAJIMA HARIMA BROWN BOVERI Type: VTR 564-11 Serial Number: XI 97711 & XI 97712 RPM: 13800 T MAX: 620°deg.C N.MAX: 230 1/s Specification: V 01113, R 011, H 01112 W02108, E 01113 L36100, T 04100
Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg
Cutter Kilia 5000 Express 500 liters vacuum cooking fast cutter, knife shaft with 6 fixed programmed speeds, 4 forward and 2 backward, infinitely variable bowl drive, electronic thermometer, electronic tour counter, hydraulic noise protection cover, hydraulic knife cover, hydraulic ejector, knife head 8-piece, separate control cabinet made of stainless steel
SAKURAI 572 EDII + C Year of manufacture: 2003 Number of Units: 5 + C Number of Impressions: c.85 Million SCC II off press controls with overhead lamp Olivermatic dampening with Technotrans Alpha c recirculation SPC semi-automatic plate change with cylinder cocking Eltra combi Automatic Blanket & Impression Cylinder Double Sized Impression / Transfer Cylinders Ink Roller cleaning Presets Suction belt infeed Anilox coating unit with extended delivery Harris & Bruno coating system Grafix IR/hot air end of press dryer Grafix anti-set-off spray.
From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg
core engine Centaur 50. The turbine and associated gearbox have been completely base overhauled after last operating and are a ready-to-install for a zero-hour turbine exchange. After the overhaul, there was no active operation / no installation. The turbine and gear box Sale Solar Centaur 50 Base overhauled core engine: Manufacturer Solar Turbines - Type CENTAUR 50 SoLoNox - Year of construction 2022 Zero-hour core turbine and gearbox - Electrical output 4,040 kWel - Speed 14,944 rpm 50Hz - Fuel Natural gas H - Design temperature 15° C - Turbine inlet temperature 665 °C (1.229 °F) - Gearbox with zero operating hours - Turbine control Solar TTS4
5.50 Meters AR Racking Pallet Rack AR Racking pallet racking with a total length of 5500 mm, consisting of a base field and an attachment field (2700 mm each). Each field has three levels (including floor space) with four trusses (2700 mm). 3 Euro pallets can be stored next to each other and 3 pallets (incl. floor space) on top of each other per field One field offers space for 9 Euro pallets Manufacturer: AR Racking Type: ARPA-S Total length: approx. 5500 mm Shelf height: 3000 mm Shelf depth: 1100 mm Clear field width: 2700 mm Pitch: 50 mm Number of storage levels: 3 (incl. floor storage space) Number of fields: 2 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 18 Year of manufacture: 2023 Stand The frames consist of two Omega profiles with their corresponding connectors, post feet and fastening materials The horizontal and diagonal struts are ...
TOP CONDITION - OVERHAULED IN 2022 ! - 1 year warranty Year of construction: 2007 Panel format: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick puncture incl. ball roller table incl. 4x head change magazine incl. 2 cutting heads incl. 10x automatic nozzle changer FE: up to 24mm VA: up to 15mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training always regularly maintained
new rear light, incorrectly ordered, from stock
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Winterhalter GS 502 Basket Push-Through Machine The Winterhalter GS 502 rack pass-through machine offers you all the necessary basic features that a rack pass-through dishwasher must have. You benefit from a consistent hygiene concept with a deep-drawn tank, surface radiator and screening system. Thanks to the concentrated cleaning power, Winterhalter guarantees hygienically clean washing results, even with heavy soiling. Specifications: Theoretical power: 60 baskets per hour Dimensions (width x depth x height): 635 x 749 x 1469 (canopy open 1932) mm Entry height: 420 ± 5 mm Working height: 850 mm Basket dimensions: 500 x 500 mm Fuel tank capacity: 42 l Rinsing water requirement per wash cycle: 2.4 l Tank temperature: 60°C Boiler temperature: 85°C Required water flow pressure: 1 bar Total connected load with hot water connection > 40°C: 9.5 kW Total connected lo ...
PART NUMBER 7794 SPECIFICATIONS - inlet width 530mm - inlet height 200mm - shaft diameter 370mm - shaft width 510mm - knife length 510mm - number of knives 2pcs - autorever – adjustable - sieve dimensions 50x50mm - Bottom geared pulling shaft 1.5kW - Toothed pulling shaft from above 1.5kW - main motor power 30kW - vibroline loading table / vibroline length 3900mm - vibroline width 500mm 1.5kW - Receiving conveyor belt length 5000mm - tape width 380mm - hopper with chute for sprues 2500x3020x2200mm - Platform 4650x750x1770mm - Dimensions of the machine with conveyor belt and vibroline length/width/height 8900x1200x2550mm - weight about 6000kg ADVANTAGES – adjustable autorever – with vibroline 3900mm – with conveyor belt 5000mm – German production – very good condition – used chipper Net price: 98900 PLN Net price: 23548 EUR depending on the pr ...
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
With new 1.500mm. wide belt and new control-unit. Will be overhauled, sandblasted and painted.
Submersible pump, 250 L/min, 27 m, STA404/500-GX+121, Brinkmann Pumps, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The pump was purchased from a company's spare parts warehouse, was in its original packaging, has never been used and is completely new. Submersible pump, 250 L/min, 27 m, STA404/500-GX+121, Brinkmann Pumps, as good as new, Immersion depth 500 m, Connection flange AD 180 mm, TK160 mm z=4, required opening for cover D140 mm, IP55, 2.6 KW, 230/400 V Special design: Base cover and impeller made of grey cast iron, shaft made of stainless steel 1.4104 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. ...
Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
High-pressure tube fan made of aluminium, AD710mm, TDE 500 D4, Ruck, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. High-pressure tube fan, diagonal impeller ventilation fan, TDE 500 D4, Ruck, up to 9880m³/h, 3.3 KW, 400 V, do not operate without FIS! Aluminium design, AD 710mm, L730mm, incl. industrial plug Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improve ...
Axial fan, W4D450-DO14-02, 0,5KW, 400V, Ebm-papst, new -40% Please note: Original Ziehl Abegg product and not a replica from ……. Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, have never been used and are completely new. Flange size 577 x 577 mm D 450 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Cooking length 4,000 mm Track width 600 mm completely stainless steel steam-heated with electric lifting device Temperature distribution in 2 zones Dimensions (L x W x H) : ± 5,000 x 1,550 x 2,200 mm infinitely variable speed
Suction fan Slow runners D= 350mm Air capacity 6250m³/h
Motor power 18,5kW Air capacity approx. 12,500m³/h Pressing 3500PA Good condition
Control cabinet with Keyence CV-5501P, CA-DC20E, CA-MP81, CA-D3R, CA-CN3 Rittal SK 3201.300 and Rexroth R911170402-102 as well as Murr Elektronik 54205 CV5501P, CADC20E, CAMP81, CAD3R, CACN3, SK3201.300, R911170402 102, Control Box, Distribution Box, Distribution Cabinet, Manifold, Cooler, Refrigeration Unit, Imaging, Camera, Camera Cable all other installed parts are included in the scope of delivery (see illustrations) Total dimensions (with Rittal cooler):Width: approx. 45 cmDepth: approx. 23 cmHeight: approx. 45 cm Total dimensions (without Rittal cooler, only the cabinet itself):Width: approx. 30 cmDepth: approx. 23 cmHeight: approx. 40 cm Modules:Keyence CV-5501P digital image receiverKeyence CA-DC20E expansion unitKeyence CA-MP81 monitor screenKeyence CA-D3R cable for LED lightingKeyence CA-CN3 cable camera cableRittal SK 3201.300 thermoelectric cooling unit (100 watt cooli ...
Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons
maximum number of results exceeded
please refine your search
