5 axes machining used for sale

Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible.

Key data: 1000 mm, 600 mm, 660 mm

Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar, Grundfos ISO 40 Max. table load ... 700 kg L x W x H ... 3000 x 2700 x 2940mmmm Machine weight... 5500kg Magazine spaces ... 24 Handwheel Heidenhain HR510FS Workpiece Probe Heidenhain TS460 Rinsing gun 10bar The machine has undergone a complete overhaul. More info on request. The machine is ready for the viewings.

CONTROLS   CNC controls FANUC 310 IS WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 600 mm   Y-axis travel: 410 mm   Z-axis travel: 460 mm   rotating range A-axis from: -30 °   rotating range A-axis up to: 120 ° TABLE   clamping surface diameter: 350 mm SPINDLE / HEAD   spindle revolutions (max): 12000 /min   drive power: 18 kW AXIS DRIVES   rapid traverse: 4800 mm/min TOOL MAGAZINE   number of positions: 30 DIMENSIONS / WEIGHTS   space requirements -left/right-: 3000 mm   space requirements -front/back-: 2400 mm   total height: 1980 mm   total weight approx.: 7500 kg Operating hours: 35`000hInklusieve: Vices see picture

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 2200 mm   Y-axis travel: 1600 mm   Z-axis travel: 1850 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° TABLE   table surface (left-right): 1000 mm   table surface (front-back): 1250 mm   workpiece load (max): 5000 kg SPINDLE / HEAD   spindle revolutions (min): 20 /min   spindle revolutions (max): 10000 /min AXIS DRIVES   rapid traverse: 40000 mm/min TOOL MAGAZINE   number of positions: 60   tool diameter max.: 110 mm   - with free neighbour positions: 250 mm   tool length max.: 450 mm   tool weight max.: 35 kg AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 2 ELECTRICAL SPECIFICATIONS   mains power supply: 130 kVA   mains voltage: 4 ...

A 3-axis milling machine is offered. Travels X/Y/Z: 1016mm/610mm/760mm, tool changer: 24 positions, spindle: prepared for external cooling unit. Accessories: recooling unit Rehsler TAE evo M, Renishaw measuring system, inspection by appointment possible.

GENERAL Project No.: 905842 Quantity: 1 pcs. Manufacturer: SW Schwäbische Werkzeugmaschinen Type: BA 442 Control: Siemens Sinumerik one Year of Make: 2022 Condition: Used machine Approx (hrs): 9760 Spindle Approx (Hrs): 4060 DESCRIPTION MILLING Travel in X 200 mm Travel in Y 500 (775) mm Travel in Z 425 mm Max. rapid traverse speed in X/Y/Z 55/70/70 m/min Max. acceleration in X/Y/Z 8/8/12 m/s2 Feed force in X/Y/Z 15000/15000/12000 N Direct displacement measurement system Tool holder HSK 63 Max. speed milling spindle 17500 1/min Max. power at ED 10-40/100% 4x32 kW Max. torque at ED 10-40/100% 4x72 Nm Spindle diameter in the front bearing 80 mm 4 pcs horizontally arranged milling spindle/s Spindle spacing 200 mm Pneumatic tool system control Chain Tool Magazine 4x30 Stations Max. tool diameter 80 mm Max. tool diameter for free neighboring spaces 150 ...

5-axis machining center Hedelius Acura 50 Control: Heidenhain TNC 7 Year of Make: 2025 Spindle hours: approx. 100h Internal machine no. 54 Travels: X-axis 500 mm Y-axis (H / V) 550 / 370 mm Z-axis 550 mm Swivel range +30° - -115° Rotary table Ø 500 x 430 mm Holder: SK 40 DIN 69871 Tool magazine: 55 compartment Spindle speed: 50 - 14,000 rpm Drive power: 22 kW Equipment: - KinematicOpt - 3D Formingstar package - Screen filter coolant system 500l - IKZ 25 bar - Booster pump from 25 to 50 bar - Scraper belt conveyor - Blow-off gun - Rinsing gun - Electronic handwheel HR 510 FS - Infrared receiver M&H - 3D Infrared Probe M&H 25.50 - Laser control system Blum LC50 260 - LTA suction

Inv. Num. : 9068 Type: VHC 3 XTS Producer: AXA Created: 2016 Parameters: Control system: HEIDENHAIN iTNC 530 Maximum vertical spindle speed: 10000 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Z-axis travel: 950 mm Cone: HSK – A 63 Number of all tools: 36 pieces Equipment: Chip conveyor NC rotary table AXA RTA 2-300 (diameter 300 mm) 3D Measuring Probe RMP60 Handwheel Hand Dishwashing Gun

A deposit of €300.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Positioning accuracy +/- 10  Repeatability +/- 5 24-position tool changer Max tool diameter 75 mm Max tool length 250 mm Max tool weight 6 kg Work tables, utensils and accessories included WARNING! FOR TRANSPORT, EXCEPTIONAL TRANSPORT WITHIN 3 METERS IN WIDTH IS REQUIRED Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-7

In order to submit a bid on this lot, a deposit of €1300.00 is required. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-9

A deposit of €5500.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Fast feed speed 42 m/min Cutting speed 1-8000 mm/min 30-position tool changer Max tool diameter 80-125 mm Max tool weight 8 kg X-axis positioning accuracy 0.015 mm Positioning accuracy Y/Z axes 0.010 mm X-axis repeatability 0.006 mm Y/Z axis repeatability 0.004 mm Tables, utensils and accessories included WARNING! FOR TRANSPORT, EXCEPTIONAL TRANSPORT WITHIN 3 METERS IN WIDTH IS REQUIRED Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-11

A deposit of €3500.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. B-axis travel -120 +90 C-axis travel +/- 360 X-Y-Z axis speed 30 mm/min C-axis speed 10800 deg/min 30-position tool changer Max tool diameter 90-130 mm Max tool length 300 mm X-axis positioning accuracy 0.016 mm Positioning accuracy Y/Z axis 0.012 mm B/C axis positioning accuracy 14 s X-axis repeatability 0.009 mm Y/Z axis repeatability 0.007 mm Repeatability of B/C axes 8 s Tables, utensils and accessories included WARNING! FOR TRANSPORT, EXCEPTIONAL TRANSPORT WITHIN 3 METERS IN WIDTH IS REQUIRED Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-4386 ...

Vertical Machining Center MIKRON VCE1200+

Pastry table Processing table Jumboline Easyline - Pastry processing table - Rondo Doge - with guillotine, with flour shaker - With cutting station incl. rollers - Year of construction 2005

Excellent condition - Fully operational - Loading / Transport possible! VENTURE 08M CNC - controlled machining center in moving gantry design travels of the axes: X = 3930 mm Y = 1953 mm Z = 300 mm working table: X = 3100 mm (length) Y = 1250 mm (width) Z = 100 mm (thickness) 50 mm (passage height without vacuum cups) CONFIGURATION: V12, H4X/2Y, N1 X-Y 90°, F1-HSK63-9KW, C-AXIS, W8 REAR, W8 SIDE V12 HIGH SPEED 7500 incl. quick change system and spindle clamping Vertical drilling unit (individually controllable with variable speed range). Spindle clamping for safe achievement of drilling depth. F1-HSK63-9 KW Automatic tool change spindle in combination with lateral tool change magazine. Tool holder: HSK63 Tool retraction: automatic Direction of rotation: right/left Speed: 1,250 - 24,000 1/min infinitely programmable C-AXIS AGGREGATE INTERFACE W8 REAR Automatic tool change  ...

Excellent condition - Fully operational - Loading / Transport possible! power: 25.6 kW Air supply: 6.5 - 7.5 bar suction flow rate: 30 m/sec Travels: X-axis: 3060 mm Y-axis: 1080 mm control system: NC 500

Control: FANUC Series O-M, with tool magazine, coolant system, central lubrication, electrical cabinet, air conditioning unit and spindle oil cooler HARBOR OILCON HBO-250 PT, year of manufacture: 1991. An on-site inspection is possible.

Excellent condition - Fully operational - Loading / Transport possible! machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 Drilling spindles horizontal X: 16 Drilling spindles horizontal Y: 4 Hedp Ez Afsh E Sghjdsk Grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18,000 rpm

Number of axes: 3, control: Fanuc OMA, operating hours: 4708h, with tool magazine. An on-site inspection is possible.

Connected load: 16kVA, control: FANUC Series 0-M, with carousel tool magazine, coolant system with external chiller HABOR Unit, spindle cooling, enclosed working area (full enclosure), handwheel (MPG) vorhanden, manual clamping devices on table and transformer separately in the control cabinet. On-site inspection is possible.

An old Stama machining center is available. Tool positions: 10, travel path X/Y/Z: 500mm/380mm/400mm, table dimensions X/Y: 700mm/380mm, tool holder: SK30, speed: 7500rpm, drilling capacity in steel: 30mm, machine dimensions X/Y/Z: approx. 2350mm/2550mm/2750mm, weight: approx. 2500kg, control: Fanuc 6MB. An on-site inspection is possible.

Excellent condition - Fully operational - Loading / Transport possible! - total connected load 20 kW - travel X 3550 mm, Y 1680 mm, Z 275 mm - travel speed X 80 m/min, Y 80 m/min, Z 20 m/min - 2 pick-up places for aggregates - 18-fold plate changer - main milling spindle with C-axis HSK 63 F tool holder - Milling spindle power 9 kW - additional heavy boring gear horizontal in Y-axis - Swivelling Grooving Saw - 5 vertical drilling spindles in Y-axis - 10 vertical drilling spindles in X-axis - 2 + 2 horizontal drilling spindles in X-axis - 1 + 1 horizontal drilling spindles in Y-axis - safety fence left/right - 6 consoles depth approx. 1300 mm - various vacuum clamps - working area X 3060 mm - working area Y 1210 mm front fence row - 1working area 260 mm rear fence row, set 100 mm - laser positioning for vacuum clamp - vacuum pump BECKER PICCHIO 2200 - YOM 2009 - ...

The machine is in good technical condition, testing is possible after prior agreement. Control system: OKUMA OSP-P200MA Power consumption: 58 kVA Travel length in X axis: 1000 Travel length in Y axis: 900 Travel length in Z axis: 1000 Description: 4 axes Weight: 26 t SPACE OCCUPATION: 3.3 x 6.5 m Tool magazine capacity: 100 Tool clamping system: BT50

Key data: 300 mm, 1130 mm, 300 mm

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit

Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles in X, 12vertical spindles in X line Working air pressure: 6 bar Max consumption of compressed air: 0,75 NL/cycle Installed power: max 7.5 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit PLC for control of the machine cycle

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control

X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...

Window machining center Dimensions of workpieces: Workpiece length: 270 x 3000 mm Workpiece thickness: 30 - 85 mm Workpiece width: 180 mm Equipment: Electric length stop Crosscut saw, diameter 400 mm, motor 3 kW Tenoning spindle, diameter 50 mm, useful shaft length 600 mm, motor 7.5 kW 3 x profile shaft, diameter 50 mm, length 600 mm, motor 7.5 kW Glazing bead saw, diameter 200 mm, effective shaft length 20 mm, motor 2.2 kW Feed device 1.5 kW, roller diameter 120 mm Oertli tools included profile 68, 78, 82

Key data: 1200 mm, 1000 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Engineered for optimal accuracy and continuous precision, this 2012 Röders RXU 1200 provides exceptional 3-axis CNC performance for advanced manufacturing and toolmaking. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spi ...

Key data: 1200 mm, 1050 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center This 2013 Röders RXU 1200 is a top-tier 3-axis high-speed machining center engineered for maximum rigidity and flawless surface quality in complex milling operations. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spindle ...

Key data: 1000 mm, 810 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Featuring state-of-the-art drive technology, this 2018 Röders RXU 1001 delivers high dynamic performance and exceptional precision for demanding 3-axis machining applications. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1001 Machine number: 15355-14 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1000 mm / 810 mm / 500 mm Clearance height: 700 mm Machining feed rate: 0 - 60,000 mm/min Table size: 996 x 796 mm Max. workpiece weight: 2000 kg Axis drives: Linear motors in all axes Spindle: 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 40 positions Max. tool diameter: 30 mm Operating hours: approx. 56,106 h Spindle hours: approx. 27 ...

Key data: 600 mm, 450 mm, 300 mm

Röders 3-Axis High-Speed Machining Center 3-Axis High-Speed CNC Machining Center A proven performer in industrial milling, this 1999 Röders RFM 600/2 delivers reliable 3-axis high-speed cutting designed for precision tooling and mold making. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RFM 600/2 Year of manufacture: 1999 Machine number: 88194-80 2. Operational parameters Travel (X / Y / Z): 600 / 450 / 300 mm Table size: 700 x 550 mm Max. table load: 800 kg Spindle speed: 42,000 rpm Spindle motor power: 14 kW Feed rate: 0 – 30,000 mm/min Rapid traverse: 30 m/min Tool changer: 18-position Operating hours: approx. 108,888 h Spindle hours: approx. 18,625 h Control: Röders RMS6 Connections (Electrical): 400 V; 20 kVA 3. Weights Total machine weight: approx. 52 ...

CNC Machining Center Hedelius T7 – 2600 1 R Magnum Control: Heidenhain TNC 7 Year of manufacture: 2023 Internal machine no. 56 Travels: X-axis F/H 2,600 / 2,030 mm Y-axis 750 mm Z-axis F/H 695 / 800 mm Pendulum operation: 760 / 1,300 mm Total clamping area 3,080 x 750 mm Table load: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Workpiece weight approx. 500 kg Mount: SK 40 Tool magazine: 50-fold Spindle speed: 50 - 14,000 rpm Power: 29kW Facilities - KinematicsOpt (incl. calibration ball) - Handheld control unit HR 510 FS - Compressed air nozzle on the spindle head - Inclined bed belt filter system 900l - Internal cooling (IKZ) 25 bar - Infrared Receiver M&H - 3D Infrared Probe M&H 25.50 - Touchsetter - Exhaust air filter - Partition wall - Blow-off guns - Rinsing guns

This 4-axis MORI SEIKI SH633 was manufactured in 2001. It features an X-axis travel of 840 mm, Y-axis travel of 760 mm, and Z-axis travel of 840 mm. The machine is equipped with 2 pallets, each measuring 630 x 630 mm, and can handle a maximum workpiece weight of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SH633 horizontal machining centre we have for sale. Contact us for further details.

This 3-axis TBI VC 1060 HH was manufactured in 2020. It features an X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1100 x 500 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the TBI VC 1060 HH vertical machining centre we have for sale. Contact us for further details.

This 3-axis NIKKEI VH-1010 was manufactured in 2007. It features a table size of 1200 × 450 mm and a maximum table load of 450 kg. The machine offers impressive axis travels with an X-axis of 1010 mm, Y-axis of 500 mm, and Z-axis of 520 mm. If you are looking to get high-quality machining capabilities, consider the NIKKEI VH-1010 vertical machining centre we have for sale. Contact us for further details.

This 4-axis MIKRON VCE 750 was manufactured in 1998. It features impressive travels of 762 mm in the X-axis, 510 mm in the Y-axis, and 560 mm in the Z-axis. The machine includes a tool magazine with 20 positions and a maximum table load capacity of 1,360 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON VCE 750 vertical machining centre we have for sale. Contact us for further details.

This 4-axis DMC 104 V linear was manufactured in 2005. It features an impressive X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust clamping surface of 1250 mm x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMC 104 V linear vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details.

This 5-axis DMG MORI CMX 50 U + PH150 was manufactured in 2019. It features an X-axis travel of 500 mm, Y-axis travel of 450 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful spindle capable of 12,000 RPM and a tool magazine for 60 tools. It includes a PH150 automationsystem. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 50 U + PH150 vertical machining centre we have for sale. Contact us for further details.

This 4-axis AXA USC-2-M was manufactured in 1994. It features a 4th axis with tailstock and a tool magazine with 22 tool positions, enhancing its versatility. Ideal for complex machining tasks, this universal machining centre represents a significant asset for precision work. Contact us for more information about this machine.

CONTROLS   CNC controls FANUC 18 MB WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 900 mm   Y-axis travel: 800 mm   Z-axis travel: 980 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° TABLE   table surface (left-right): 630 mm   table surface (front-back): 630 mm   workpiece load (max): 1200 kg SPINDLE / HEAD   spindle type: horizontal   spindle revolutions (max): 10000 /min AXIS DRIVES   rapid traverse: 50000 mm/min TOOL MAGAZINE   number of positions: 140 AUTOMATIC WORKLOAD EQUIPMENT   store type: table changer   number of store positions: 2 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 19000 kg ATTACHMENTS   chip conveyor: yes   coolant unit: yes   b ...

This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine.

This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 80T was manufactured in 2004. It features impressive travels of approximately 980 mm in the X-axis and 630 mm in both Y and Z axes. The machine includes a 4-position tool changer and operates with TNC 5.0 control. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 80T vertical machining centre we have for sale. Contact us for further details.

This 5-axis Mazak VARIAXIS C 600 was manufactured in 2022. It features a table size of 730 x 450 mm and impressive travels of 650 mm in the X-axis, 550 mm in the Y-axis, and 530 mm in the Z-axis. The machine is equipped with a spindle speed of 18,000 rpm and a tool magazine that holds 60 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS C 600 vertical machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2013. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and weighs approximately 10,000 kg with the rotary table. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production lin ...