5 axes machining used for sale

Siebler + Göring 5000/160E vertical four side seal strip packer for effervescent tablets, maximum foil width 160mm, currently fitted with handling and format parts for 20mm diameter tablets. Output up to maximum 150 strokes per minute. Includes a duplex module of ABB Flex-Picker robots for automatically loading an existing cartoning machine infeed (cartoner not included)

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Built in 1997 Pile height 400 mm section height max 250 mm Infeed height 700 bis 1.300 mm Delivery height 890 mm Speed max 60.000 Ex./h Weight 980 kg (approx.) ; working condition

Upright stack delivery with pressing unit; working condition

Newtec Model: 5000C checkweigher roller conveyor serial: 1491 weighbed 350mm x 330mm, with roller outfeed conveyor, weight ranges from

Axial groove ball bearing Steyr 51220B (7 shards)

Zentrifuge Cepa Padberg GZ 500, BJ. 1994,approx. 100 kg per batch, 750 rpm Next: CEPA Padberg GZ 500 E, BJ 1994, with 125 kg swivel crane VETTER See pictures below

cast-ribbed clamping plate with T-swallowtail grooves, approx. 5400 x 2200 mm, water gutters on the face, weight approx. 8 t

Steel of carrier 12 pieces Length of 7600 mm Height 580 mm Width 210 mm Profiles: Length: 1 x Ã? 90 mm x 7600 mm 2 x Ã? 70 x 7310 mm Height: 9 x Ã? 50 mm x 420 mm 3 x 70 x 50 mm 1 x 70 x 40 mm 2 x 70 x 30 mm 1 x 70 x 60 mm 2 x D 70 x 60 x 30 mm Price: â?¬950 per 1 piece Price â?¬10000 per 12 pieces

Thermal laminating machine Max sheet size 580 x 740 mm min. Sheet size 210 x 210 mm Material thickness 105-500 grams Speed of 30 to 50 m / min. Mass 3660 x 1278 x 1780 mm

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

DEAR'S SALE, DEUTZ 6M540 2 CRANKSAFT STD 1 BLOCK COVER, LINER, CONROD, PISTON ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

DEAR'S SALE, MAK 552AK FULL COVER, GOOD CONDITION Brgds Hakan KUSCU +905323642509 info@kscege

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used; ready for operation

Bolt feeders Manufacturer: Tucker Type: BV 50D.00.44/5.18F8 and BV 50D.10.01/5(12-25) There are 2 pieces. The price is for 1 PCs.

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: min/max ca. 98-110 cm dimensions: ca. 40 x 8 x 256 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 500 A Suction capacity: approx. 500 m ³/h Cat. No.: PP W31 001 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation

Rotary vane vacuum pump packing Manufacturer: Busch Type: 251-512 Status: used, tested! Including: oil filling Delivery time: In stock!; ready for operation

DYNABOX 500 - 230V 50Hz DYNAJETten with system: the powerful hot water unit Dynabox 500 with up to 500 bar working pressure is the ideal addition to all DYNAJET trolleys. Simply on the Connect the high-pressure side between the high-pressure cleaner and the cleaning tool and already achieve results with up to a maximum of 95 °C hot high-pressure water that can be achieved with conventional Cold water cannot be reached. Of course, the Dynabox 500 is also characterized by its low weight, small dimensions and easy loading and Transportation options. BASELINE System hot water generators Type Trolley/Box Pressure class 500 bar Pressure adjustable No Pressure minimum 40 bar HYDRAULICS Minimum flow rate 7 l/min Maximum flow rate 15 l/min THREADED CONNECTION Input connection M24x1,5 AG Output connector M24x1,5 AG DRIVE Voltage and frequency 230 Volt AC 50Hz Volume  ...

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 AG  ...

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation

Good day have with this machine a top TECA print up to 4 colours! Carrée and pad cleaning! Absolute Professional machine. If you have questions just email!

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 500th HELI Blue Performance The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessor ...