5 axes centre used for sale

Key data: 500 mm, 1000 mm, 2500 1/min

Lathe Voest Alpine Steinel WNC 500 S x 1000 Turning diameter 500 mm Turning length: 1000 mm Control system Sinumerik 810 T-GA 2 2 stage gearbox i = 4 Power: 37 KW at 100% ED Max. torque during turning: 1450 Nm Tailstock manual with clamping and coupling Speed max 2500 rpm Electronic handwheel For milling: Hydraulically swivelling servo motor with 720 Nm and max. 18.5 rpm 12-speed disc turret with driven tools max. 3000 rpm at 4 kw Tool holder VDI 40 Many VDI 40 tool holders for internal and external machining as well as driven tools, incl. some tools - e.g. internal turning steels otherwise without tools!

The Brewiks 500 is a two-vessel microbrewery system operating on a plug-and-brew principle. It consists of a mash tun and a lauter tun, both on wheels, which together function as mash tun, filter tun, boiler, and whirlpool. Average output is up to 580 litres of high gravity wort per 6-hour brew cycle. Construction and Certification - The system is manufactured from quality stainless steel AISI 304/316 and carries a CE certificate. - Both vessels are stone wool insulated and mounted on stands with wheels for easy repositioning. Mash Tun - Included Equipment - 7-inch touchscreen controller - Electrical installation with 40 kW electrical heaters - Hygienic pump - Water heating system - Heat exchanger for heating sparging water - Pipe heat exchanger with hot water recuperation - Stone wool insulation - Valves and fittings - Stand on wheels - Condensing lid with silicon seal and drain tu ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Glass chromatography column BPG., Inner diameter (mm): 200, Total volume (L): 16, Lower tapping: 1, Top tapping: 2, Bottom stitching: 1, Lower stitching: 1, Top stitching: 2, Top nozzle: 2

Ventilated safety cabinet with KOTTERMANN brand tray retention, Total retention volume 21.3 litres, With doors equipped with a cylinder to lock the doors open or to close them automatically., To connect to a centralized suction system via two DN70mm air inlets, 3 fixed shelves with retention:, - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 285x1010 H 275mm (Retention volume 9.7 Liters), External dimensions (mm): 570x1200 H 745 mm

Chromatography column., Volume (L): 3.5 Liters , Allowed pressure: 3 bar , Authorized pressure: 3 bar , Lower tapping: 1, Top tapping: 2, Allowed temperature: 40°C , Bottom stitching: 1, Lower stitching: 1, Top stitching: 2, Top nozzle: 2

Size: 550 mm Equipments: Air Table program Photocells defect

Power strip fully functional Used Color: RED Equipped : 18 C13 _10A ; 6C19_16A All outputs can be switched individually and measured Total number : 25 pieces without mounting bracket Firmware version : 4.2.05-50274 Connector : CEE 32 A bought as seen without warranty Pickup Payment in advance against invoice the registered sales price is exclusive of VAT. Shipping : Costs are due in advance according to express service providers

Power strip fully functional Used Color: BLACK Equipped : 18 C13 _10A ; 6C19_16A All outputs can be switched individually and measured Total number : 17 pieces without mounting bracket Firmware version : 4.2.05-50274 Connector : CEE 32 A bought as seen without warranty Pickup Payment in advance against invoice the registered sales price is exclusive of VAT. Shipping : Costs are due in advance according to express service providers

106 Mio 5 colors Autoplate Perfector CP 2000 Automatic blanket cylinder washing Automatic rollers washing Grafix Alphatronic 200 IR

Komorimatic with Technotrans Beta c ,PQC IV with PDC-S, S-APC,powder sprayer Grafix, KMS IV with adjustment of diagonal register (cocking),AMR , all washing devices,KHS approx 200 mil impressions

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Filter holder: Gauze holder for extraction, mobile -Carrier frame: made of stainless steel -Extraction area: Internal dimensions 1900/440/H1060 mm -Dimensions: 2130/530/H1830 mm -Weight: 74 kg

Komorimatic with Baldwin Combi Cabinet, APC, PQC, PDCSX, ink temperature control, All washers, Coating unit with Harris&Bruno, HUV dryer with 1 lamp in delivery, Ink declutch unit 1 and 5, Skeleton transfer cylinders (Without powder sprayer, without IR dryer) approx. 115 mil impressions

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Type: 7.00-12 Rim 5.00 S-12 532/271 -Rim: for dual tires -Bolt circle: Ø 205 x 20 mm -Hub bore: Ø 160 mm -Price/Fee: complete -Dimensions each: Ø 580 x 280 mm -Weight: 56 kg/piece

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Type: 7.00-12 Rim 5.00 S-12 532/271 -Rim: Lemmers 6507 5.00S-12 -Bolt circle: Ø 205 x 22 mm -Hub bore: Ø 160 mm -Price/Fee: complete -Dimensions each: Ø 590 x 175 mm -Weight: 50 kg/piece

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers, curved roller conveyor -Conveyor belt rollers: Transport rollers, carrying rollers, curved roller conveyor, diameter 50/86 mm -Transport width: 575 mm -Wave: Dimensions see photos -Material: Plastic, galvanized steel -Quantity: 41x transport rollers available -Price: per piece -Overall dimensions: Ø 86 x 620 mm -Weight: 1.8 kg/piece

An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Very good conditions

Top maintained MAHO MH 500 M Immediately available from location without accessories shown x-travel 500 mm y-travel 380 mm z-travel 350 mm Control Maho 134 Main spindle: Speed range - main spindle 63 - 4,000 rpm/-1 Drive power - main spindle 3 kW Gear stages 2 Tool holder SK 40 Quill stroke 50 mm You can swivel it. h/v Work table: Table clamping area 800 x 360 mm T-slots 14H7 - 5 / 63 max. table load 200 kg Feeds: Feed speed 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ) 4 / 2 / 4 m/min Total power requirement 5 kW Machine weight approx. 1.6 t

Technical data of the pallet rack stand: Shelving system: META (Thyssen) Type: Multipal S The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 7,000 mm Depth: 500 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Used engine few hours Very good condition !

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm control: Heidenhain total power requirement: kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 170 kg,

PDC-S (Printing Density Control-Spectrophotometer) (II) Remote register control: diagonal Komorimatic continuous dampening Ink unit temperature control KMS - Komori Monitoring System (IV) Cooling and recirculation (Technotrans) Coating unit with chambered doctor blade system (Tresu + Technotrans alpha.v) IR-Dryer (Baldwin-IVT) Impression-cylinder washing device - automatic Plate cylinder - chromed Ink-roller washing device - automatic Blanket washing device - automatic Extended delivery Powder sprayer (Weko AP 110) Blanket cylinder - chromed Model (0,6mm) KPC

Net weight= 170 kg,

THERMO HAAKE Viscotester 550 Viscometer with PK 100 D Plate-Cone Measuring System Speed Range: 0.5 to 800 min-1 Uncertainty: ± 0.1% CD Mode: < 0.5% min-1 Torque Range (Ncm) up to 400 min-1: 0.01 to 3 Torque Range (Ncm) up to 800 min-1: 0.01 to 2 Uncertainty: ± 0.5% SDF Temperature range: 50 to +250 °C Power supply: 230/115 V (50/60 Hz) With measuring tank for coaxial cylindrical geometry With measuring unit PK 100D with multiple sensors The MV 3 st mobile is slightly damaged Viscotester 550: Typ002-7026 Haake PK 100 D: Typ002-2089

x-travel: 1.020 mm y-travel: 510 mm z-travel: 510 mm control: MSC 501 Fanuc table surface area: (APC) 1.200 x 480 mm max. table load: (APC) 550 kg Main spindle:: turning speed range - milling: 10.000 U/min power capacity - milling spindle: 22 / 18,5 kW tool taper: BT 40 Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg rapid traverse: 32 m/min feed: 1 ~ 16.000 mm/min Tipp feed: 0 ~ 1.260 mm/min spindle bearing diameter: 85 mm total power requirement: 59,5 kVA weight of the machine ca.: 6,9 t dimensions of the machine ca.: 3,9 x 2,7 x 2,9 m Documents: Chip conveyor: 2x Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: pallet changer: 2 pos. CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT  ...

Number of knives: Z2 V2 width: 17 mm circle diameter: 160 mm material: Stahl : WP Bore diameter: 40 mm Jointing rebate cutter Weinig type 530 160 01 / 2 08 for use on the planing spindle of Weinig planing machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Net weight= 404 kg,

Used Pablo cartoner type Pablobox 546. The device forms cartons, glues after manual loading of the product, closes the carton and glues. Year of construction 2020. CE

max. format 37.50 x 52 cm Year of manufacture 2004 PCS-H color remote control Ryobimatic Film Dampening Units Technotrans cooling unit RPC Semi-Automatic Plate Changing Automatic washing equipment Dry pollinator Reading totalizer: approx. 35 million print

CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz  ...

Model: 7920.5020 Year: 2022 Condition: Used Serial Number: 6815 1423 2204 0108 Stock Number: 3337 Content 1300 litres Description: Stainless steel freezer with double door and lock Refrigerant: R290 Temperature range: -18 °C to -22 °C Power:230VAC, 50Hz, 780W Dimensions: 830 x 1480 x 2050 mm Weight: 201 kg

Sheet metal cleaning machine Jeros 5010-828 Condition: used, in working order, bakery conditionSuitable for trays 58x78cm edges on the short sideWith oiling

Model: 7920.5020 Year: 2022 Condition: Used Serial Number: 751004716 Stock Number: 3336 Content 1300 litres Stainless steel freezer with double door and lock Refrigerant: R290 Temperature range: -18 °C to -22 °C Power: 230VAC, 50Hz, 780W Dimensions: 830 x 1480 x 2050 mm Weight: 201 kg

Spiral mixer Sinmag KM-50T Condition: used, functional Year of Make: 2011 Suitable for max. 25 kg flour or 50 kg dough Stainless steel boiler and spiral Automatic timer Two timers Two speed settings Digital control Reverse Mobile with brake

Food Tools 5AFCE Cheese cutter Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries

Bread slicer Rego Rotec 500 Year of Make: 2012 Condition: cleaned & tested Passage width: 230 mm Passage height: 140 mm Insertion depth: 500 mm Cutting thickness: 3-25 mm Max. number of slices: 145 per min. Dimensions WxDxH: 1127 x 705 x 1090 mm

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

Seed station Lippelt Moli 580 Working width: 580 mm Single-sided seed application 1x Spreader container with brush 1x spreading container with fine and coarse spreading roller Humidification via water bath Pressure roller for attaching the seed to the dough pieces Mesh hinges, pull-out Mobile seed collection container Control with start/stop button, 2x potentiometers for belt speed and spreading rate and emergency stop button

Dosing unit Gorreri DVG 500 Year of Make: 2011 Condition: functional Suitable for filling, spraying or decorating various types of products from doughs, creams, jams and other liquid products Output: max. 40 strokes per min Compressed air: 250 l/min (6 bar) Dimensions LxWxH: 1200 x 600 x 1850 mm Weight: 80 kg

- Heating coil 250 kW - Voltage: 575 V / 60 Hz More information on request!

Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)

heavy thickness planer Paoloni S 515 Planing width 510 mm Planing height 250 mm Electric height adjustment with 10th button for precise positioning 4-Knife Safety Planer Shaft Table led four times Main motor 4 kW Feed rate 5, 8, 12.5, 19.5 m/min Steel - Pull-out roller Link pressure beams made of solid aluminium material Under-table roller Year of manufacture 1997 CE conformity Machine is WORKSHOP TESTED in VERY GOOD CONDITION From stock Lieboch 

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ------------------------------------------------------- technical details short summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: -------------------------------------------------------- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactur ...

Labeler Manufacturer: PAGO Type System 580 Suitable for self-adhesive labels Carton labellers (folding cartons), 3-sided labellers Output 75- max. 200 pieces/min. Operating instructions available

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches