5 axes centre used for sale

This APV Gaulin 79 MC 2-5TBSX aseptic homogeniser is a 3-cylinder machine which is designed for 300 liter per hour with a maximum pressure of 340 bar. The homogensier is equipped with 2-stage with ball valve cylinder, manual controlled. Manometers. Overpressure valve. Motor: 5,5 kW - 380/420 V - 13,5 Amp - 50 Hz - 950 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 300 liter per hour, Stages: 2 Stages, Max. Pressure: 340 bar, Valve cylinder: Ball valves, Product: Milk, Piston diameter: 18 mm, Motor: 5,5 kW - 380/420 V - 13,5 Amp - 50 Hz - 950 rpm, Dimensions: 120 x 80 x 125 cm, Weight: 400 kg

This APV Gaulin 159 MC4-5TBS homogeniser is a 3-cylinder machine which is designed for 300 / 600 liter per hour with a maximum pressure of 250 bar. The homogensier is equipped with 1-stage with ball valve cylinder, manual controlled. Manometer. Overpressure valve. Motor: 7,5 kW - 380 V - 16 Amp - 50 Hz - 1.440 rpm. Oil pumping system inside the machine. Stainless steel cladded. Including simple free standing control panel., Type of Machine: Homogeniser, Capacity: 300 / 600 liter per hour, Stages: 1 Stage, Max. Pressure: 250 bar, Valve cylinder: Ball valves, Product: Cream / Cream cheese, Piston diameter: 24 mm, Motor: 7,5 kW - 380 V - 16 Amp - 50 Hz - 1.440 rpm, Dimensions: 120 x 80 x 165 cm, Weight: 800 kg

This APV Schröder / Gaulin MC18-2,5TPS homogeniser is a 3-cylinder machine which is designed for 10.000 liter per hour with a maximum pressure of 175 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometers. Pulsation demper. Motor: 63 kW - 380 V - 120 Amp - 50 Hz - 1.475 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 10.000 liter per hour, Stages: 2 stages with Micro-Gap valve, Max. Pressure: 175 bar, Valve cylinder: Poppet valves, Product: Milk, Piston diameter: 60 mm, Motor: 63 kW - ...

This APV Gaulin MC18-2,5TPS homogeniser is a 3-cylinder machine which is designed for 7.000 liter per hour with a maximum pressure of 150 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometers. Motor: 37 kW - 400 V - 70 Amp - 50 Hz - 1.475 rpm. Oil pumping system inside the machine. Stainless steel cladded., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 7.000 liter per hour, Stages: 2 stages with Micro-Gap valve, Max. Pressure: 150 bar, Valve cylinder: Poppet valves, Product: Milk, Piston diameter: 65 m ...

This APV Gaulin MC18-5TPS homogeniser is a 3-cylinder machine which is designed for maximum 5.500 liter per hour with a maximum pressure of 345 bar. This machine, based on the motor power and the piston diameter is set on 4.800 liter per hour with a maximum pressure of 345 bar. The homogensier is equipped with 2-stages, hydraulich controlled. Piston diameter 45 mm. Manometer. Motor: 55 kW - 380 V - 99 Amp - 50 Hz - 1.470 rpm, forced cooling on the motor (for running at lower capacities). Oil pumping system inside the machine. Stainless steel cladded., Additional features:, No typeshield on the machine, so unknown serial number and year of manufacturing. Model and capacity based on piston diameter and motor power., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 4.800 liter per hour, Stages: 2 stages, Max. Pressure: 345 bar, Valve cylinder: Poppet ...

max. wheel diameter: 500 mm gear width: 400 mm max. module: 10 mm Control: SIEMENS Sinumerik 840D sl max. workpiece diameter: 500 mm Max. Distance from table to counterholder: 1.120 mm Max. Distance table to center of milling spindle: 585 mm Min./max. center distance between milling spindle: 50/475 mm table diameter: 420 mm table hole - depth: 150 mm Table equipped with hydraulic clamping device: : milling spindle: : milling spindle speeds: 48- 480 1/min stufenlos milling head swivelling angle: +/- 50 A-Achse Grad tool taper: SK 40 Tangential path of the milling carriage: 200 mm milling cutter diameter: 170 mm Max milling width: 250 mm electrical supply data: : voltage: 400 V operating frequency: 50 Hz connecting power: 55 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 6,2 x 4,2 x 3,e m Equipment and Accessories • High-performance CNC gear hobbing machine LIEBHER ...

: 0,4-3 / 8 mm Workingpiece thickness from to: 8 - 50 mm Total length: 5.360 mm Feed speed: 11 m/min. total power requirement: 7 kw Weight: ca. 2.500 kg Premilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : Elektrisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 80 mm max. turning diameter: 460 mm Max. Turning length: 1.000 mm control: System TX 8F max. Spindle speed: 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. The conveyor system is not included, the inlet and tray magazine are included. Technical data  type: VP500 year of manufacture: 2012 Total output: 20 cycles/min length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm packaging data:  length: 100-300 mm width: 200-450 mm height: 60-350 mm height of tray edging: 40-100 mm pre-cut: length: 200-500 mm width: 290-600 mm power: 400V,N,PE | 10kW/33A |  air: 6-7 bar | 20 NL/cycle

Work table AT 500 drawer cabinet Work table Gastro bakery table Stainless steel version with 3 drawers Approx. dimensions: 500 x 600 x 850 mm, WxDxH Used device as good as new

Sheeter Fritsch Rollfix 3WK 520 for all doughs for rolling out and touring Dough sheeter mobile with hand and foot control Connection 400V, 16A-CEE plug Used machine

Manufacturer: Horizon Model: AFC-502 Type of Machine : Cross Folding Machine Paper Size Range: A5 to A2 Power Supply: 200V, 50Hz, 3.3 KVA Find more here - / Contact us at -

Reference Num.: 4430 Brand: Ryobi Type: 524HE Construction year: 2004 Impressions: 60 mio Available: directly Status: In production Location: Europa Printing units: 4 Equipment: - RYOBI Semi RPC - RYOBI-matic - automatische Wascheinrichtung - Kühlgerät Technotrans alpha.d - Maschine OHNE Wendung - Farbfernsteuerung - Plattenstanze - Puderapparat

The machine is in good technical condition, after prior agreement it is possible to test it. Spindle completely overhauled summer 2023 Ball screw replaced in Z axis in 2020. Feeds: X axis 850 mm Y axis 700 mm Z axis 750 mm Working feed 1-24000 Positioning accuracy +/- 0.005 Rapid feed – 48m/min all axes. Distance spindle face – front of table 150-900 mm Distance spindle axis – pallet surface 50-750 mm Pallet – 500 x 500 Spindle alfaP22/8000 Motor power (continuous/15') – 11/15/18.5 Spindle speed – 8000 rpm Base speed – 8000 rpm Tool clamping force – 1000 N Max. torque (15') 29.2 Nm Orientation built-in sensor Taper ISO 40, taper 7/24 Power transmission – synchronizing belt and pulley Cooling through the spindle – 70 kg/cm2, max flow 20 L/min, pump power 3.7 KW Magazine for 60 tools – chain – be careful, the catalogue incorrectly states 40.

Pullers Hooks  NEW!  ( 2 pieces )For 580 mm deep, 40 mm thick pullers7 screwsBracket bottom Made of stainless steel see picture for details 

Sourdough plant Isernhäger B 500 Eco Manufacturer : Isernhäger Type : B 500 ECO Year of construction : 2008 Weight : 395 Sourdough stirring kettle Sourdough container IsernHäger the baking culture completely in stainless steel Kettle capacity 500 liters mobile on rolls Details see pictures.

Manufacturer : JerosType : 5015/828400Volt 50Hz 1,5kW 4,4AZto clean 2-edged baking and perforated trays.For sheet width 78cmchassis completely made of stainless steela dirt drawer made of stainless steelFor 78x58cm wide trays on rollsDetails see picture

â Product descriptionManufacturer: Seewer RondoType : Syn 503Model : 513Dimensions : W: 190cm D: 97cm H: 125cmBand depth : 47cmCondition: usedDetails see picture

Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Oval manhole - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Connection for ventilation

Heidelberg SM 74-5PH Year: 1997 Counter: 129mio Size: 52x74cm Autoplate Alcolor Technotrans cooling All auto. Washers IR dryer CPC 1.04 Cptronic Alphatronic powdering

Year: 2009 Collator: 1x VAC 60Ha + 2x VAC 60Hm Stacker: ST-40 Accumulator Folder: ACF30 Trimming Blower: TB30 Sub Accumulator: SA40 Saddle Stitcher: SPF30 Three Knife trimmer: HTS30

GMP PROTOPIC 520 MAX SHEET SIZE 520 X 720 MM MAX SPEED 15 M / MIN AUTOMATIC SHEET SEPARTOR MANULA FEEDER OIL TEMPERATURE CONTROLLED LAMINATING ROLLER COMPRESSOR

Dixi 50 S ? Vertical Baler Year: 2004 General: Type: Vertical baler for paper, cardboard, foil, PET, textiles, and other recyclable materials Pressing force: 50 t Drive: 7.5 kW electric motor, 400 V / 50 Hz Control: Microprocessor-controlled with programmable settings Bale Performance: Cycle time: ~41 seconds Press time: ~23 seconds Bale size (L × W × H): 120 × 80 × 80?110 cm Bale weight: 350?500 kg (depending on material) Feeding opening: 1200 × 670 mm Dimensions &, Weight: Machine size (L × W × H): 1600 × 1300 × 3100 mm Transport height (lowered): 2240 mm Approximate weight: 2,050?2,180 kg Operation &, Features: Manual bale strapping Automatic start when feed door closes Hydraulic ram return and full bale ejection Adjustable press time and bale size Optional extras: dust-extraction connection, hydraulic door opener Type: Vertical baler for paper, cardboard, foil, PET, te ...

serial number: 6023449 Four wheel steering: ja weight: ca. 7 t : Video vorhanden : ja : 50 % lifting capacity: 2,5 To. volumn: Fassungsvolumen 0,7 cbm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sumbel Herald 500; Condition as is; cleaned and tested; Working width 500mm; suitable for cold glue. Sumbel Herald 500; condition as is; cleaned and checked; working width 500mm; used for cold glue.

6 axis Type of controll tasc 6000 Power (ton) 320 Length ( mm) 4420 Depth groove ( mm) 420 Passage between the couloumn (mm) 3680

Injection moulding machine Arburg 270s 500-60 and Boy 12 M 1998

Used paddle mixer with a capacity of 500 liters. Manufacturer IBL. Acid-resistant design.

A container mixer, probably Engelsmann, is available. Container dimensions X/Y/Z: 1200mm/1200mm/900mm, volume: approx. 500l, machine dimensions X/Y/Z: approx. 2750mm/2000mm/2200mm. An on-site inspection is possible. The manufacturer statement is a well-founded assumption. Expected to be available 2026.

Size: 320 × 550 mm Equipments: Sheet feeder: Two drum feeders with gripper system Belt conveyor channel for product conveying Surface with rice paper structure to protect the product Front stop made of aluminum Side guides with sorting screws for sheet positioning Screw ejector for precise bow positioning Sheet control system: Double sheet inspection using mechanical thickness measurement Misaligned bow detection using photocell Photocell-controlled activation of the second feeder and glue injection timing Glue unit: Hot melt or cold glue application (configurable) Glue injector with digital keyboard setting Delivery: Double roller press station for optimal adhesion Inclined conveyor belt for shingled product stacking at the exit Control system: SPS control unit Touchscreen control panel Safety system with light barriers Technical data: Min. Format 100 × 150 mm Max. Format 320 × 550 m ...

Scissors

A complete longitudinal beam welding system (vehicle carrier) Merkle with a tack welding station, a cooling station and a longitudinal beam welding machine is available. Beam height range: 70mm-500mm, max. beam length: 13700mm, flange width: 120mm/150mm, flange thickness range: 5mm-20mm, web plate thickness range: 3mm-10mm, clear width: 85mm-500mm, web offset at 15° transition: 50mm. 1) Welding system, track length: 20m, rotating device: 0°-45°, total clamping and tack welding range: 14300mm, guide spacing: 500mm, roller conveyor height: 800mm, welding process: MIG/MAG-Pulse-Arc, travel speed: 6m/min, vertical stroke: 800mm, horizontal stroke: 2x270mm, power sources: 2x HighPulse 550 RS, torch: MSB 400W. 2) Tack welding device, tack welding position: 45°, max. changeover time: 10min. 3) Transport and cooling line, tack welding area roller conveyor length: 15000mm, buffer and cooling  ...

Size: 500 x 350 mm Equipments: Accumulate & Folder ACF-30 (serial 381007) Stacker ST-40 (serial 409107) 4x Collator VAC-600Ha Three knife trimmer HTS-30S (serial 632003) Saddle stitcher SPF-30S (serial 632003)

Used hammer mill from Alpine type B 500.

diameter range 2-5,5 mm shaft length under head 45 mm max. outside dia. Alu 6 mm output pieces/min 450 cutting length 64 mm

Used 5000 liter double-ribbon mixer from American Food Equipment Company. Internal dimensions: length 2500mm x width 2000mm x depth 1000mm. Supporting structure. Acid-resistant design.

Used Van Dam 568 , 8-Color Cup Printing Line :-, Auto Elevator Tray Feeder, Cross conveyor, Cup Stack feeder to Main Print Unit, Universal Screw Denester, Corona Pretreater with Leak Tester, Main 8-Color Print unit., Each Print head consisting of : 8 x precision ground rollers., 2 x Form Rollers, 2 x Oscillating Rollers - water cooler. Gear driven Fountain Rollers., All eight heads swing open for easy plate mounting and free roller accessibility., Easy axial and peripheral fine register adjustment of the plate cylinder while the press is running., Speed continuously variable., UV-On Mandrel Curing Unit, Dual Timing Belt Take-Off, Counter/ Stacker Unit, with Ejector Tray, Max. Cup Rim dia. 150 mm. Max. Taper 10°. Max. Print height 150 mm. Max., PLC Controls. OPC with Touch Pad Controls and Color Display., Max. Production Speed 600 Cups/ min depending on Cup size & Shape

diameter: 500 mm thickness of jaw: . mm hollow: 145 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Handover: in its current condition as inspected -Housing: Damage/corrosion, see pictures -Manufacturer: Ohio Electric Motors, Permanent Magnet Motor -Type: C-561339X8829 -Power: 0.74 kW -Speed: 2200 rpm -Voltage: 36 V -Transmission: Browning Part No. 20QC56L -Translation: 7.5 :1 -Shaft: Ø 19 x 35 mm/Ø 25 x 30 mm -Dimensions: 395/210/H195 mm -Weight: 21 kg

Indoor crane, crane, crane runway, crane rails, steel girders, medium-width I-beams, double-T-beams, IPE steel girders with manual trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Beam: IPE 240 -Carrier width: 120 mm -Equipment: 1x IPE steel beam, 1x roller chassis, 2x adjustable stops -Load capacity: 1000 kg -Dimensions: 5480/120/H245 mm -Weight: 182 kg

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -SKF: Plummer block housing type SNA 516-613 -Price: per piece -Number: 2 pieces -Dimensions: 315/120/H170 mm -Weight: 9 kg/piece

V-belt pulley, pulley with taper bushing, taper clamping bush, taperlock clamping bush -Diameter: 510mm -Total width: 185 mm -Belts: 7 -V-belt width: 22 mm -Taper bushing mount: Desch 5050-80 Ø 80 mm (can be changed) -Pulley: balanced -Quantity: 1 piece available -Weight: 120kg -other pulleys: in stock

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -SKF: Plummer block housing type SNH 509 -Inside diameter: 57 mm -Price: per piece -Number: 2 pieces -Dimensions: 204/86/H110 mm -Weight: 2.9 kg/piece

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate 500 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 18 mm -Groove spacing: 280 mm -Dimensions: see drawing in the photos -Dimensions total: 500/500/H75 mm -Weight: 128 kg

Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch -Manufacturer: All Mecanic, multifunctional punch -Type: 994.500-1 - Execution: pneumatically operated, with foot control -Punching tool: see photos -Dimensions: 400/270 / H370 mm -Weight: 28 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter drier housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange -Manufacturer: Alco, thermo-valve lower part unused in original packaging -Type: C 501-7 mm/PCN 803235 -Price: per piece -Number: 10 Stück -Dimensions package: 105/80/H70 mm -Weight: 0.3 kg/piece

High-pressure centrifugal fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Fan and plate: made of stainless steel -Motor power: 2.2 kW -Speed: 1440 rpm -Diameter fan: 550 mm -Quantity: 3 pieces available -Price per piece -Dimensions: 570/625/H625 mm -Weight: 74kg/piece

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1450 rpm -Volume flow rate: 22.14 m³/h -Max. operating pressure: 24.5 bar -Number: 2x cooling units available -Price: per piece -Dimensions: 550/315/H390 mm -Weight: 88 kg

Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Manufacturer: Balkancar, electric chain hoist with trolley -Load capacity: 125 kg -Main stroke 8 m/min -Delivery head: 12 m -Protection class: IP44 -Dimensions: 320/250/H660 mm -Weight: 31 kg