129,270 used machines on RESALE, but how to find them? Machine Search
Power: 500 kVA / 400 kW Diesel engine / type: MTU / 12V183TB32 Cylinder: V12 Cooling: liquid-cooled Generator / type: NEWAGE STAMFORD / HCI 534 D2 Voltage: 400 / 231 V Frequency: 50 Hz Speed: 1500 min-1 Type: complete unit in the sound-proof 20' - HC-container Tank: 1500 litres Switchgear / Starter: automatic switchgear with handover synchronisation. Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: Yes Dimensions (L X W X H): approx. 6150 x 2480 x 2896 mm Weight: approx. 12000 kg Year built: 1996 / 2010
Power: 500 kVA / 400 kW Diesel engine / type: VOLVO / TAD 1631 GE Cylinders: number 6 Cooling: liquid-cooled Generator / type: MECC ALTE / ECN 40 SC/4 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: complete unit in the soundproofed 20 container Tank: 1000 liters Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24V Generator switch: Yes Power switch: Yes Automatic: Kuhse Dimensions (L X W X H): approx. 6100 x 2340 x 2380 mm Weight: approx. 9000 kg
Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 ba ...
Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm
Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel
Refurbished: 2018 PLC: Siemens S7 Saw blade 550 mm Engine power 11 KW Saw blade feed 0-3000 mm / min Cutting speed (SB 500 mm): 4500 m / min (SB 550 mm): 5100 m / min Square maximum work area: 170 x 170 mm Flat maximum work area: 380 x 75 mm Round maximum work area: 165 mm Supply length 10-1000 mm Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) about: 2800mm x 1600mm x 2200mm (Magazine) about: 3300 x 2200mm x 1800mm Footprint Lxw 6100 mm x 2200 mm The machine was overhauled 2014 in our House. Among others were renewed following points: -New PLC control -New Elgo positioning system -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Overhaul Menzel minimal lubrication system -Replacing common wear parts -Overhaul of t ...
For sale: REINTJES Marine gearbox WAF 560 Reduction: 5,947:1 Built 1992 The gearbox is in very good condition, always stored in facility with climate control. Price is Ex Works - The Netherlands. In case you need we can arrange the transport with very interesting rates. if you need further assistance or information please e-mail us: info@amp-power.nl Pictures available on request
Bearing platform 4,000 x 5,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 2 main beams C+300 x 3 x 3,990 mm (perforated) 5 cross beams S+300 x 2 x 4,800 mm (closed) 10 mounting angles 2 Cross Associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Inhpbdx Columns: 100 x 100 x 3 mm Main beam: C-Profile C+300 x 3 mm (perforated) Cross member: Sigma profiles S+300 x 2 mm (closed) Flooring: 38 mm chipboard, white on one side P6 Columns in the following standard colors: Ral 7035, light grey Ral 70 ...
used
Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T
Key data: 420 , 525 , 400
Execution: unit type: mobile version: Schallgedämmt technical data motor: motor manufacturer: one motor type: D 2842 LE engine power: 424 KW cooling: water-cooled starting: electric 24 V DC speed: 1500 rpm fuel: fuel oil EN 590 Technis Che data generator: generator manufacturer: Ansaldo FKI generator type: M 7B 316 LD 4 generator power: 525 kVA voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: auto-start features: peak-load operation switch: generator switch 3 pin delivery: built tank: execution: double-walled litres: 1,000 dimensions of the unit: width approx. mm: 2350 height mm: 3.260 length mm: 9.230 weight KG: 10,600 use: State: well get built: 1992 delivery: immediately Verl price net in â?¬: on request: hours of operation: 701 location: Verl - Germany
Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg
Bearing platform 4,000 x 15,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6Main carrier C+300 x 3 x 4,190 mm 15 cross member S+300 x 2 x 4,800 mm 30 Mounting angle 4 Cross Associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural UK white, OK nature incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Columns: 100 x 100 x 3 mm Main carrier: C-Profile C+300 x 3 mm Cross member: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, white on one side Columns in the following standard colors: Ral 7035, ...
Bearing platform 8,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions floor area: 8,000 x 5,000 mm Floor area: approx. 40 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: Ok minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 6 steel tube supports 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 Mounting angle 3 Cross Associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035, light grey Ral 7016, anthracite grey Ral 3000, red, fire Ral 5003, sapphire blue (Other colors on request!) Main and cross beams galvani ...
RECON Part number: 0205 6280 Ring groove 1&2: 0,50mm oversize ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
24 months warranty TOP value for money . Robust, mobile base dough sheeter, mounted on castors with locking For all types of dough (or marzipan) to roll out and laminating PVC conveyor belt, quick and easy to clean Speed: 50 cm / sec Band width: 520 mm Conveyor belt length: 980 mm on each side = 1960 mm Foldable table left and right Roller adjustment 1 mm up to 30 mm Engine power: 0.55 kW 220/380V - 3Ph - 50 Hz - 16A-CEE connector Folded dimensions: 1200 x 1030 x 1750 mm WxDxH Working dimensions: 2610 x 1030 x 1070 mm WxDxH Weight: 158 kg additional performance of bak-tec including: DGUV V3 tested (formerly BGV A3) with certificate
1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min
24 months warranty TOP value for money . Robust table sheeting machine for all kinds of dough, and marzipan suitable for sheeting and laminating PVC conveyor belt, quick and easy to clean Speed: 50 cm / sec Band width: 520 mm Conveyor belt length: 670 mm on each side Foldable table left and right Roller adjustment from 1 mm to 30 mm Engine power: 0.55 kW 220/380V - 3Ph - 50 Hz - 16A-CEE connector Folded dimensions: 850 x 940 x 670 mm WxDxH Working dimensions: 1460 x 940 x 580 mm WxDxH Weight: approx. 100 kg additional performance of bak-tec including: DGUV V3 tested (formerly BGV A3) with certificate
Bearing platform 12,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions floor area: 12,000 x 5,000 mm Floor area: approx. 60 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 8 stand, one side 100 x 100 x 3 mm 6 main beam C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross member S+300 x 2 mm, L = 4,800 mm (closed) 26 Mounting angle 3 Cross Associations 24 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000 fire red Ral 5003 sapphire blue (other colors on request) Main and cross bea ...
---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Capacity: 540 bottles /h of 0.5 l. Made from stainless steel. Product: beer, kvass, soft drinks.
Bearing platform 16,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions floor area max.: 16,000 x 5,000 mm Floor area: approx. 80 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 10 stand, one side 100 x 100 x 3 mm 8 main beam C+300 x 3 mm, L = 3,990 mm 18 cross member S+300 x 2 mm, L = 4,800 mm 36 Mounting angle 4 Cross Associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000, red, fire Ral 5003 sapphire blue (other colors on request) Main and cross beams galvanized ...
Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)
Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.
Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. outside marbled 4.500 liters UNI-DACH Measurement and Weight: Total Height: 2900 mm Cyl. Height: 2000 mm Diameter: 1750 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: - with manhole round DN 500 with hanger - with 2 cran eyes - with thread connection 2 x DN 25 and 1 x DN 65 - with CIP spray head Cylinder tank: - ladder hook - with sample valve - with level indicator with bar and scale - with temperature indicator analog - with thread connection DN 80 Lower bottom: - with conical bottom - with forward pulled outlet pipe with butterfly valve DN 50 - with 4 calotte feet height adjustable
Sideloader ICEM GTE 20/502-4 d Four way forklift Strength 12500 kg Forks 800 mm Masch. No. 17346 Lifting height mm 5020 Height 2300 mm Free stroke 1200 mm Electric motor Batteries good Battery charger available Built in 2005 Weight without battery 2000 kg L x W x H: 240 x 180 x 220 cm The machine is in perfect condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Stein RAKO 500 smokehouse, electical heated, all stianless steel, cooking, baking, smoking, smoke system for wood chips. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Key data: 3000 , 1500
Technical data: Height 300 mm Length 3.000 mm Width 1,500 mm
4 pcs 5600 x 1885 x 400 mm price 10500eur/pc
MÖSCHLE Storage tanks outside marbled for wine, water, fruit juice, schnapps 11.500 liter UNI-NIED Measurement and Weight: Total Height: 3430 mm Length: 2350 mm Width: 1800 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe NW50 Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection NW25 For level indicator with bar and scale With connection for zapf clape gr. 37 With connection DN 15 for sample valve Lower bottom: With flat bottom With outlet pipe connection NW50
Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl
Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...
Camshaft Deutz 528-6 RECON Part number: 0206 5541 (0206 5542 + 0206 5543) Left engine, clockwise ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Used parts ex ISEKI TG 5390 AHL. 28 kw/40 hp turbo diesel, hydrostat drive 3-stage, 4-wheel drive, front power lifter, cabin, lawn tyres. Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...
NEW! Part number: 1202 8436 (3.418.0.400.007.5) ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
S5 - used 50 m³ / 50,000 litre steel tank, underground tank, firefighting water tank, water Container, water tank. In good condition, as underground tank or for aboveground use, steel tank, storage tank, water tank, firefighting water tank. Exterior with a new coat of bitumen. volume: 50 m³ / 50,000 litres material: stainless steel tank, single-walled dimensions: appr. 2.5 m diameter x 10.0 m length weight: appr. 8.0-10.0 t The container is used, emptied inside and has been professionally cleaned. According to the age traces of use are present. The container could be used as storage tank for water, waste water, sewage, liquid manure, seeping juice, canola oil, rain collection tank, water cistern, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update a ...
used
Used but reconditionable #25442 Used: 750€ Recon: 3800€ ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
maximum number of results exceeded
please refine your search
