129,508 used machines on RESALE, but how to find them? Machine Search
A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible.
grinding wheel diameter: mm table length: - mm table width: - mm total power requirement: 5,5 kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Strip width 1,500 mm, strip thickness 0.5-1.5 mm, coil weight 10 tons. Longitudinal sections 4, straightening rollers 7, coil inside diameter. 508 mm Coil Outside Diam. 1,600 mm
Belt width 1,500 mm, strip thickness 0.5, - 2.0 mm, coil weight 7 tons, straightening rollers 7 pcs. , Longitudinal sliced 4 x , Coil inside diam. 508 mm, coil outer diam.1,600 mm
General SKU390X1059 MakeAlfa Laval LocationBarneveld CEcheck TypeCB300-64H Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface5 m2 Size length985 mm Sizes width365 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface5 m² Capacity17,87 / 22,08 l. Number of platens40 Plate sizes365 x 985 mm ConnectionsDN100 & DN65 Max. temperature—160 / 225 °C Information No.18306251 Year of construction2008 Mounted on framecheck Floorspace0,60x0,43 m Total height1,50 m Weight135 kg Extra SpecificationsPressure S3S4=-1/25-33 bar, test pressure 47 bar, S1S2=-1/16-16 bar, test pressure 29 bar Plate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared t ...
General SKU408X1223 LocationBarneveld CEcheck MakeSterling Sihi Pressure Working pressure0.033 Bar Main Features MaterialMild steel Volume500000 Ltr. Motor15 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:1 Capacity500 m³/h With motor15 kW 220—250/380—420 V 1455 rpm Inletø 40 mm Outletø 50 mm Information TypeCPHX 55320 AB AGE OA 1 Mach.No.126733 Year of construction2010 Mounted on framecheck Floorspace1,50 x 0,50 m Total height0,80 mVacuum pumpsSihiPumps > Vacuum pumpsBrand > Sihi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU397X1160 MakeBoge LocationBarneveld CEcheck TypeC 15-2-LFR-500 Pressure Pressure buildup10 Bar Main Features Capacity2.25 m3/Min Motor30 KW Pressure10 Bar Specified Features - Blower Blowercheck 2x air compressor Capacity0,52-2,25 m³/min Motor2x 15 kW, 380 V, 3004 rpm Information No.5146436 / 5147193 Year of construction2020 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace2x 2,20 x 0,95 m Total height2,00 m Weight1600 kg Extra Specifications With control unit (as is), 2x Funke heat exchangers, Boge water/oil separator, type CC 10-2, 2x filter unitsBlowersBogeBlowers > BlowersBrand > Boge What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...
General SKU400X1189 LocationBarneveld CEcheck MakeGross Type500 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume640 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck (Bioreactor) Capacity500 Ltr. (640 Ltr.) Vessel sizesø 1000 x 1140 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (7,7 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.7855 Year of construction2005 Mounted on legscheck and wheels Floorspace1,40 x 1 ...
Transnorm belt conveyor GF 3450-600-500 RA2469 Technical data: Conveyor length (NL): 3450 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3450 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of ...
Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you ...
Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm
used
up to maximum panel format 1397 x 1778 mm, with automatic pallet loader Immediately available, price on request
Presse à injecter électrique NETSTAL 50 T type ELION 500 - 60 Année 2005 - 6000 heures Force de serrage : 50 T - 500 KN Diamètre vis : 18 mm Rapport L/D : 21,7 Pression d’injection : 2350 bars Volume injectable : 25,4 cm3 Poids injectable en PS : 24,4 gr Vitesse d’injection : de 250 à 450 mm/s Distance entre colonnes : 360 x 360 mm Dimensions des plateaux : 920 x 920 mm Epaisseur mini/maxi du moule : 150-450 mm Course d’ouverture : 310 mm Dimensions : 4,36 x 1,66 x 2,05 m Poids : 6200 kg
Key data: 750 mm, 650 mm, 60 A
Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition. ...
General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm Information No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX compatiblecheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steel With sound proof cabinet Working hours 65 hrs Ball millsSiebtechnikMills > Ball millsBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU413X1251 MakeCelsius LocationBarneveld CEcheck TypeCWR500 Pressure Working pressure2.6 Bar Working pressure jacket2.6 Bar Technical specs Max. temperature140 °C Main Features MaterialStainless steel Motor9.2 KW Specified Features - Continuous dryer Screw dryercheck (screw heat exchanger) Double shaftcheck Continuouscheck Capacity1500 kg/h Product inletDN150 Manhole440 x 330 mm Product outlet250x700 mm With jacketcheck 25 l. Shaft can be heatedcheck Max. temperature140 °C Motor9,2 kW, 400/690 volt, Screw speed6.4 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information No.610269.C Year of construction2011 Mounted on framecheck With switchcheck Floorspace9,027x1,10 m Total height1,90 m Weight6210 kg Extra Specificationsinternal volume 2x 550 l., , steam heated Continuous dryersNew arrivalsCelsiusDryers > Continuous dryersNew ...
General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...
General SKU322X551 LocationBarneveld CEcheck MakeGero Main Features Materialstone Max.temp.1100 °C Specified Features - Drying oven Drying ovencheck Max. temperature1100 °C Number of compartments:1 Internal width500 mm Internal depth250 mm Electric capacity6 kVA, 400 V Number of doors:1 With fancheck Motor0,25 kW, 230/400 volt, 2850 rpm MaterialGlass, stone Information TypeDRSR-A-200-500/11 No.200801042Drying ovensNew arrivalsGeroDryers > Drying ovensNew arrivalsBrand > Gero What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU438X1385 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor18.5 KW Length1100 mm Specified Features - Stirrer Stirrercheck Shaft length1100 mm Sizes stirring headø 250 mm Motor18,5 kW, 400 V, 2935 rpm Mounted on supportcheck MaterialStainless steel Information MakeYstral Serial266680913 TypeY 18.500 S/GD7-4 TDS Year of construction2013 Floorspace1.00 x 0,41 m Total height2,10 mStirrersYstralMixers > StirrersBrand > Ystral What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU300U907 MakeSiemens TypeDiffraktometer D5000 Year of construction1991 LocationBarneveld Floor space1,03x1,03 m Total height1,84 m Weight760 kg Extra SpecificationsThe D5000 can be used to determine the crystal structure of a material through X-ray diffraction. By directing an X-ray beam onto the sample, the D5000 measures the diffraction patterns that arise when the radiation is scattered by the atoms in the crystal lattice. These patterns are analyzed to obtain information about the arrangement of atoms in the crystal lattice. MiscellaneousSiemens - ElmoMiscellaneous > MiscellaneousBrand > Siemens - Elmo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...
General SKU312X501 MakeJ. Engelsmann TypeVib speed 500 Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Surface0.5 m2 Size length1000 mm Sizes width500 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:1 Sieve sizes1000x500 mm With covercheck InletDia. 195/100 mm Outlet2x 165 mm Drive vibro motorcheck 2x Motor0,30 kW, 230/400 volt, 1500 rpm Sieve perforation0,315 mm With ball cleaningcheck MaterialStainless steel 1.4305 (303) Information Mounted on stainl. st. framecheck With switchcheck Floor space1,80x1,20 m Total height2,00 m Weight350 kgVibro sievesEngelsmannSieves > Vibro sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...
General SKU388X974 MakeWestfalia TypeKA 1-06-525 No.1697 723 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Motor0.55 KW Specified Features - Separator Separatorcheck Motor0,55 kW, 380 volt, 1380 rpm, (Ex) Max. rotor speed9700 rpm Self-dischargingcheck Inletcheck Liquid outletDN10 Solids outletDN20 MaterialStainless steel Information Mounted on mild steel framecheck Mounted on wheelscheck Floorspace0,80x0,50 m Total height0,90 m Weight150 kg Extra SpecificationsBowl diameter 138 mm, Product 1,5 kg/dm3, With tooling and spare parts SeparatorsWestfaliaCentrifuges > SeparatorsBrand > Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit ...
General SKU397X1148 LocationBarneveld CEcheck MakeDe Dietrich TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume499 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 1000 x 1060 mm Dished bottomcheck Dished top sidecheck Manhole300x400 mm Top connectionscheck Outletcheck With jacketcheck (135 Ltr.) Max. temperature— 10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.54020 / 71431 Year of construction1982 / 2011 Mounted on legscheck Floorspace1,3 x 1,3 m Total height2,74 m Weight2000 kgGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth: -- Machine is ...
General SKU397X1149 MakeDe Dietrich LocationBarneveld TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume500 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009U) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 800 x 1060 mm Dished bottomcheck Dished top sidecheck Top connectionscheck OutletDN80 With jacketcheck (135 Ltr.) Max. temperature—10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.58632 Year of construction1991 Mounted on legscheck Floorspace1,1 x Total height1,06 m Weight1600 kg Technical specs Extra information135 Ltr. 6 bar —10 / 200 °CGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth ...
General SKU376X935 MakeBecomix TypeDH-500 LocationBarneveld CEcheck Motor Motor power8 kiloWatt Main Features MaterialStainless steel Motor8 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Emulsifiercheck Rotor sizesDia 245 x 40 mm Teethed rotorcheck Without hoppercheck Inlet25 mm and 50 mm Outlet50 mm With mechanical sealcheck Motor8 kW (400 V, 2950 rpm) With variable speed drivecheck (freq controller) Speed2910 rpm. Inline high shear mixers MaterialStainless steel 1.4306 (304L) Information No.070/4-N0003 Year of construction2010 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,6 x 1 m Total height1 m Weight250 kg Extra Specificationsin-line colloid-millInline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in working conditio ...
General SKU202X016 MakeABL Anlagentechnik/ OFRU LocationBarneveld TypeASc-500 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume510 Ltr. Specified Features - Distillation Distillation installationcheck Capacitybruto 500l, netto 250l Max. temperature170°C With stirrercheck Motorcheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Distillation Capacity510/55l Information No.020113 Year of construction2013 Year of construction2013 Mounted on framecheck With switchgearcheck ( as is) ATEX compatiblecheck Extra SpecificationsWas used to regenerate(recover) the solvent after filtration step before loading into a tray dryer... in this case acetone were captured in the IBCs ,to reduce the footprint of lost solvents...the recovery system will work with similar solvents as wellDistillationOFRUColumns > DistillationBrand > OFRU ...
General SKU219X100 LocationBarneveld MakeXplore Sizes Screw diameter10 mm Main Features Motor0.55 KW Inlet diameter5 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter5-10 mm L/D10 Number of heating zones:6 Electric heatingcheck Air coolingcheck Water coolingcheck DC-motor550 watt, 208-240 volt Screw speed1-400 rpm Capacity5 ml MaterialChromed steel Information TypeMicro 5 Mach.No.5-03-12 Year of constructionUnknown With switchgearcheck Floorspace0,70x0,40 m Total height0,85 m Weight220 kg Extra SpecificationsScrew length 107 mm, volume 5,5 ml., (5 ml.), max barrel temperature 450°C, RKC SR mini touchscreen system, max vertical force 5 kN, pressure 200 barDouble screw extruders-Extruders > Double screw extrudersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...
General SKU430W1391 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity687 l., (500 l.) Vessel sizesDia. 1000x1200 mm Dished bottomcheck ManholeDN350 Top connectionscheck OutletDN25 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft95-136 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information No.5065 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace1,30x1,30 m Total height2,40 m Weight1100 kg Extra Specifications- with control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHerma ...
General SKU222W212 MakeDidier Filtertechnik GmbH No.2190 Year of construction2011 Mounted on legscheck and wheels Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacitynetto ±550 Ltr. (bruto 700 Ltr.) Vessel sizesDia. 900x1300 mm Dished bottomcheck Dished top sidecheck Top connectionsDia. 50 mm (4x) OutletDia. 30 mm With jacketcheck jacketed outlet valve Half coil jacketedcheck 12 Ltr. Max. temperature110°C With propellor stirrercheck Motor2,2 kW, 220/380 volt, 1400/571 rpm Speed mixing shaft571 rpm Information LocationBarneveld Floorspace1,0x1,0 m Total height3,15 m Weight600 kg ATEX compatiblecheckStainless Steel ReactorsDidier Fi ...
General SKU300U578 LocationBarneveld MakeMemmert BmbH Main Features MaterialStainless steel Volume108 Ltr. Max.temp.220 °C Specified Features - Drying oven Drying ovencheck Max. temperature220°C Number of compartments:1 Capacity108Ltr. Internal width560mm Internal depth400mm Internal height480mm Electric heatingcheck Electric capacity2kW Number of doors:1 With trayscheck MaterialStainless steel 1.4301 (304) Information TypeUE500 No.911229 With switchcheck(as is) Floorspace0,75x0,65m Total height0,87m Weight100kgDrying ovensMemmertDryers > Drying ovensBrand > Memmert What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU250U362 MakeBepex TypeL200/50p No.10427 Year of construction1987 Mounted on framecheck Main Features Motor3 KW Inlet diameter310 mm Width50 mm Specified Features - Roll compactor MaterialStainless steel 1.4301 (304) Roll compactorcheck Roll width50 Roll diameter200 Rolls can be heated/cooledcheck Motor3,0kW,220/380 Volt, 1420 rpm With variable speed drivecheck Roll speed18-90 Rolls can be adjustedcheck With dosing/compacting screwscheck Stöber, type: R65-3115-300-4, Dia: 50mm, pitch: 40mm With motor0,75kW, 220/380Volt, 2780/3335 rpm With variable speed drivecheckStöber, type: R25-2038-K2-075-2 Speed3,1-15,5 With hoppercheck Hopper sizesDia: 310x280mm InletDia: 310mm Information LocationBarneveld With switchcheck With switchgearcheck Floorspace1,6x0,9m Total height1,3m Weight750 kgRoll compactorsBepexCompactors > Roll compactorsBrand > Bepex ...
General SKU371T1118 LocationBarneveld MakeEdwards Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume400000 Ltr. Motor3.7 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:2 Capacity400m³/h With motor2,2kW, 220-240/380-415 With motor1,5kW, 220-240/380-415 Inlet100 mm Outlet25 mm Information TypeA38513935 Mach.No.297 Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace009x0,55 m Total height1,15 m Weight350 kg Extra Specificationsmachine is a 2-stage vacuum pump. Consisting of: Edwards Mechanical booster model EH 500A Edwards High Vacuum Pump model E2M 80 Vacuum pumpsEdwardsPumps > Vacuum pumpsBrand > Edwards What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping ...
Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 820 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery: w ...
Transnorm conveyor belt GF 1200-600-500 RA2432 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports an ...
Transnorm conveyor belt GF 1060-600-500 RA2472 Technical data: Conveyor length (NL): 1060 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1060 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m ...
Cutting height: 125x220 mm machine weight ab.: 450 kg Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area: 500x300 mm work height max.: 100 mm Weight: 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Engine displacement: 10850 cm³ Motor power: 154 kW Top: Diesel Azmer Length 7500 mm Width 2500 mm Height 3700 mm Trek - Masses Gross Weight 16300 kg Registration weight 16300 kg Unladen weight 10890 kg Load capacity 5410 kg
process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No ...
CNC lathe DMG MORI NLX 2000 SY/500 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of Make: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm Travel in X: 260 mm Travel in Z: 590 mm Travel in Y: +- 50 mm Spindle bore: 65 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 6000 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Tool presetter manual ( HS ) Collet Chuck Hydraulic with Foot Pedal (HS) Collet Chuck Hydraulic with Foot Pedal (GS) Bar Feeder LNS Move S2 30 tool holders Various powered tools Direct displacement measuring system X, Y, Z axis Signal lamp 4 colours Chip conveyor Coolant Setup Operating Instructions
Manufacturer: HSM Model: VK 5512 Year of Manufacture: 2018 Pressing force: 560 kN Find more here - / Contact us at -
Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing
General SKU061H261 MakeHeraeus Hanau TypeVTR-5036 No.9004800 Year of construction1990 LocationBarneveld Main Features MaterialAluminium Volume45 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying oven(1x) Max. temperature180 Degr. C. Number of compartments:1 Capacity45 Ltr Internal diameter340mm Internal depth500mm Electric heatingcheck Electric capacity1,1 KW, 230 Volt Number of doors:1 MaterialAluminium Information With switchcheck Floorspace0,6x0,7 M Total height0,5 MDrying ovensHeraeus HanauDryers > Drying ovensBrand > Heraeus Hanau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU234S120 MakeBühler Cobra 501 TypeSRK 440 No.10310050 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt Information With switchcheck Floorspace2,1x1,5 M Total height2,9 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU253S172 MakeBühler AG (CH) TypeCobra 201, SKR 440 No.10194572 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt MaterialStainless steel Information Floorspace2,1x1,1 M Total height2,7 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU356S840 LocationBarneveld MakeENCO Energie Componenten GmbH (AT) Type509 ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume509 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Notified body(Tuv) Capacity509 l Vessel sizesdia.800 x 900mm Dished bottomcheck Top connections(3x)DN50, DN80, DN100, DN125, DN200 OutletDN50 Max. temperature160°C With propellor stirrerSemix 040 Motor0,5 KW, 400Volt (EEX e II T3) Speed mixing shaft690 rpm Information No.8317/2 Year of construction1996 Mounted on legscheck Floorspace1,1x1,1 M Total height2,5 M Weight600 KgPressure vesselsEncoTanks > Pressure vesselsBrand > Enco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any de ...
General SKU201T021 MakeUmformtechnik Hausach GmbH Type500 ltr IBC with stirrer LocationBarneveld Pressure Working pressure0.2 Bar Main Features MaterialStainless steel Volume500 Ltr. Pressure0.2 Bar Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity600 ltr (nett 500 ltr) Vessel sizes900x1080 mm With covercheck Conical bottomcheck Manholedia. 40 mm Top connectionsdia. 45 mm (3x) Outletdia. 52 mm With propellor stirrercheck Motor0,55 kW 220/380 Volt Information No.105588 Year of construction1993 Floorspace1,1x0,9 m Total height1,5 m Weight150 kgVertical tanksUmformtechnikTanks > Vertical tanksBrand > Umformtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...
General SKUR0379 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Fine Impact Mills MaterialMild steel Information No.162166 Year of construction1981 Floorspace1,1x0,9 M Total height1,1 M Weight720 KgFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU358S867 LocationBarneveld MakeGallenkamp TypeOVL 570 010J No.4A 0007 Main Features MaterialAluminium Volume29 Ltr. Max.temp.200 °C Specified Features - Drying oven MaterialAluminium Vacuum drying ovencheck Max. temperature200 degr. C Number of compartments:1 Capacity29 ltr Internal width375 Internal depth300 Internal height260 Electric heatingcheck Electric capacity0,9 kW Number of doors:1 With trays(2x) 355x275x45mm Information Year of constructionunknown With switchcheck Floorspace0,7x0,5 M Total height0,5 M Weight60 KgDrying ovensGallenkamp UkDryers > Drying ovensBrand > Gallenkamp Uk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...
General SKU345S771 MakeGEA Westfalia Separator Industry GmbH TypeTA 40-01-506 No.1685-547 Year of construction1985/2001 LocationBarneveld Main Features MaterialStainless steel Capacity6000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Motor11 KW, 380/420 Volt InletDN25 Liquid outletDN25, DN25 Mounted on stainl. steel framecheck MaterialIncoloy 825, Stainless steel 1.4539 (904L) Information Mounted on mild steel framecheck Floorspace1,4 x 1,2 m Total height1,5 m Weight820 kgSeparatorsWestfaliaCentrifuges > SeparatorsBrand > Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
maximum number of results exceeded
please refine your search
