5 axes centre used for sale

This Okuma MA-500HA was manufactured in 2004. A robust horizontal machining centre, it features a spacious X-axis travel of 700mm, Y-axis of 900mm, and Z-axis of 980mm. It includes a high-speed spindle capable of 20000 RPM and an efficient through coolant pump. For more information about this horizontal machining centre, please reach out to us.

This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information.

This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details.

This 3-axis MORI SEIKI DuraVertical 5100 was manufactured in 2007. It features an X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1350 x 600 mm and a maximum table load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5100 vertical machining center we have for sale. Contact us for further details.

Key data: 730 mm, 450 mm, 470 mm

Mazak CV5-500 CNC 5-Axis Vertical Machining Center CNC control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Maximum 500x320 mm workpiece X-axis travel 730 mm Y-axis travel 450 mm Travel Z-axis 470 mm C-axis (table rotation) 360° B-axis movement ±110 (220) ° Spindle speed: 18,000 rpm Spindle holder HSK A-63 Spindle motor 15/11 kW Magazine capacity 48 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

This 3-axis DAEWOO Mynx 500 was manufactured in 1999. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 575 mm. The machine includes a T-slotted table size of 1200 mm x 500 mm and a maximum table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO Mynx 500 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Bridgeport VMC 560/22 was manufactured in 1995. It features an X-axis travel of 560 mm, Y-axis travel of 380 mm, and Z-axis travel of 520 mm. The machine is equipped with a spindle speed of 6,000 rpm and a tool magazine with 22 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 560/22 vertical machining centre we have for sale. Contact us for further details.

Vertical Machining Center MORI SEIKI GV-503/5ax x-travel 610 mm y-travel 765 mm z-travel 460 mm pallet table size 550 x 550 mm taper BT 40

CN Centerless grinding machine, ROSSI MONZA 510 CN, 2004, Fanuc electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), Grinding wheel 250 mm 510 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed thr ...

x-travel: 1050 mm y-travel: 510 mm z-travel: 560 mm control: Matzatrol type: M Plus table surface area: 1300x550 mm : 1,5 t workpiece weight: max. 1500 kg Tool changer: . spindle taper ISO: Spindle capacity: KW turning speeds: . U/min total power requirement: kW weight of the machine ca.: 8,9 t dimensions of the machine ca.: . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website.  ...

x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm Control: Siemens 840 D feeds - fine adjustment: 1-8000 mm/min table-size: 2120 x 500 mm table load capacity: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle turning speed - stepless: 0-15000 U/min spindle motor: 20 kW spindle bearing diameter: 70 mm tool diameter: 63 /126 mm tool magazin:: 40 Stk weight: 12 t total power requirement: 65 kVA weight of the machine ca.: t dimensions of the machine ca.: m X-axis travel: 2,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Control system: Siemens 840 D Feed rate (fine adjustment): 1 – 8,000 mm/min Table size: 2,120 × 500 mm Table load capacity: 2,000 kg Rapid traverse (X-axis): 40 m/min Rapid traverse (Z-axis): 20 m/min Tool holder: HSK-A63 Spindle speed range (infinitely variable): 0 – 15,000 rpm Spindle drive: 20 kW Spindle bearing  ...

TECHNICA ZSM 5100 ist eine Zentrumschleifmaschine, ausgelegt für hohe Präzision, Genauigkeit und Zuverlässigkeit. Bearbeitung von Ø 8–125 mm, Länge 50–1090 mm, Tischlast max. 120 kg; Zentrierbohrungswinkel 60°; Zentrierkegel Ø 1–60 mm. Schleifspindel Ø 32 mm; Schleifscheiben-geschw. Ø15: 45.000 t/min, Ø27: 22.500 t/min, Ø48: 13.000 t/min; Schleifspindel 0,25 kW; Verfahrweg Kopf max. 160 mm; Anschluss 400 V; Gewicht ~590 kg; Abmessungen L1120×B1070×H1950 mm. Zubehör: Erhöhung 470 mm, Staubabsaugung, Maschinenlampe, Schutzabdeckung. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Electric retrofit with inverter (regulating wheel) The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding ...

CNC Wood Machining Centre manufactured in 2005. This MASTERWOOD TEKNOMAT 5000 features a main milling unit and a second milling unit, both with a tilting range of 0–90°. It includes a drilling head, an Anuba hinge insertion unit for various hinges, and a screwdriver unit. The machine also has sliding supports with suction cups and a vacuum pump. If you are looking to get high-quality woodworking capabilities, consider the MASTERWOOD TEKNOMAT 5000 machine we have for sale. Contact us for further details.

Mayfran ConSep 2000 Coolant System Chip conveyor with drum filter 70 bar high pressure pump Cooling by the spindle Electronic handwheel NC rotary table with 360,000 positions Synchronized Threading Automatic on/off Preparation for Palletech CE mark Documentation

Mori Seiki DuraVertikal 5080 3Achs Bearbeitungszentrum (11/2006) Hersteller: Mori Seiki Typ: DuraVertikal 5080 Baujahr: 11/2006 Zustand: gebraucht, gut, in Produktion

axis stroke (X,Y,Z): 6175x1550x300 mm Number of spindle head vertical: 20 St. Number of spindles head horizontal: 10 St. Number of milling agregates: 1 St. Speed: 24.000 U/min. Capacity: 300 kg/h Sawing unit: ja_yes 0 Control: Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----------------------------------- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° MPU MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMA ...

input cartridge for SelectSet 5000 - all details can be seen on the picture. The cassette is tested and comes from a workingSelectSet. Available on stock

AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now

AGFA knife for SelectSet 5000. Including knife holder and dental equipment. Available now

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: Railway railcars Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange ...

AGFA drive motor of the knife for SelectSet 5000. Including dental equipment. Available now

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4 + 4 bags Sniffer Output Available: Immediately

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

Offer of a high-bay warehouse with approx. 2,500 parking spaces. Shelf stand approx. 6.00 m high All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Price ...

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

AT-Motor Scania Typ=DC12 Pumpe-Düse komplett ohne Anlasser+Lichtmaschine. 1 Jahr Garantie,337KW bei 1.800 U/min.Für Notstrom+BHKW Anwendungen. info@miw-zeven.de

Austausch-Motor Actros DB OM 501LA-430 PS generalüberholt auch ohne Altteilrückgabe,geben Aufpreis,zu verkaufen.1Jahr Garantie info@miw-zeven.de

Incubator from Heraeus Type: B 5090 E Rated temperature: 70C 2-door glazed Dimensions: length x width x height: approx. 119 x 71 x 75 cm Weight: approx. 70 kg

All original spare parts+engines Lombardini from stock ready to ship the following motors available from stock immediately: LDW602/ 1003 / 1204/1204T/ 1404 MIW Ltd. Engine Repair Plant North-West Ring 8 D-2704 zeven-Germany Phone: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Mail=info@miw-zeven.de

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

We offer for sale 2 Jenbacher cogeneration plants, type: JW312GSB. Motors are of the manufacturer of Stamford. Performance: 675 KVA. Both units are complete. One is easily broken. Hours of operation: approx. 55000 and 28000 At the operational unit, the generator was replaced and overhauled.

Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

111

A fireproof card box approx. 500 kg of own weight. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and erro ...

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Fraesspindel HSD ES805 8.5 kW with admission HSK63

X-ray tube assembly type SRM 2250 red abzugen GS-500.

Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...

Reconditioned cylinder head

Cylinder head Exchange

Used chamber filter press / filter press Rittershaus & Blecher / R & B 500 x 500 Side holm guided Plate size: 500x500mm Cake thickness: 25 mm Useful length: 2200 mm Chamber number: 47 pieces Filter pressure: 15 bar Closing pressure: min. 220 bar / max. 260 bar Cake volume: approx. 3.9 m3 Total filter area: approx. 17.4 m2 Expiration: closed Plate material: PP Plate transport: manual Filter cloths: optional Pump: Abel diaphragm pump optional

Reconditioned injector in Exchange

Reconditioned cylinder head