5 axes centre used for sale

closing pressure:6600 kN weight of the machine ca.:45,5 t

screw size:60 mm closing pressure:3500 kN weight of the machine ca.:25,5 t

Thickness: 2, Weight: 412,80, Total sqm: 25,80

Band saw with - Saw blade welding machine - Whetstone - Saw blades - Documentation Roll diameter 440 mm Projection 420 mm Workpiece height 200 mm Cutting speed 20 - 1550 m/min Table clamping area 560 x 560 mm Saw blade length 3250 mm Total power requirement 1.5 kW Machine weight approx. 0.8 t Space requirements approx. 1.2 x 0.8 x 2.1 m Condition: unchecked (6)

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W

Centrifuge with water treatment - Factory No.: 22126799 - Machine ON: 5,144.65 h - Timer switch Drum diameter 382 mm Drum height 250 mm Capacity 40 kg Wall thickness of the drum 13 mm Drum speed 2850 rpm Flow rate 800 l/h Operating voltage 400 V Total power requirement 5.0 kW Machine weight approx. 500 kg Space requirement approx. 1.90 x 0.70 x 1.65 m

Straightening plate spotting plate 700 x 500 mm Panel size: 700 x 500 mm Solid panel thickness: 55 mm Total height: 880 mm

Serial number: EB035487 Nominal speed: 2400 rpm with a swivelling work table Table dimensions: approx. 170 x 170 mm Speed range: 280 - 2350 rpm Reference: Hansmann - Lot 12

2x 4.0 amp/h batteries brushless

Table surface 600 x 500 Swivel range 110 degrees Height 150mm good condition

Stored in working condition

! PAY ATTENTION Delivered without the ENERPAC hydraulic unit and the 2Hydraulic clamps Tool holder: BT 40 JIS B 6339 (MAS 403 BT) - [ISO 7388-2] Possibility for 20 Tools, comes without tool(holders)

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W

With spare blades

Length approximately 8 meters.

description: Here we offer an industrial PC 5C5001.11 from B & R. This PC is installed in a Krones power panel, this is also included in the offer. After delivery / pickup, you have the right to return the total package without giving reasons, within 4 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning,  ...

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Hydraulic motor PMH MCF55 Nobmjv D Hwrey Ex Ipecu Displacement cc/rev 55 Max output speed rpm 4,300 Max pressure bar: 500 The max output torque: Nm 350 Weight: 25 kg Manufacturer: PMP Industries Part Number: MCL.5502.1 Serial Number: PP0377490 Customer Code / Model: PMH MCF55 Country of Manufacture: Italy 1 piece in stock

500 litre, Stock number: R989, Rapid mixer, stainless steel,, standing on foot console for floor build in., Hydraulic raise/lower function,, hinged lid in the top., Sliding draught outlet in the bottom,, timer function and safety cut off., Ø 1200 mm., Litre: 500, Material: Stainless steel AISI 304

2 units, HP: 550, Working hours: 2900

TECNOVA EXTRUSION LINE, for PE PP PC PS ABS, BUFFER SILO, screw conveyor, CRAMMED FEEDING UNIT, extruder with 130 mm. screw, 37 L/D, n.1 degassing pump, 200 Kw.a.c.drive, semi-automatic hydraulic screen changer with 220 mm Ø screens, hydraulic power station, water ring pelletizer, drying centrifuge, vibro-classifier, constructed in 2019, the line is offered AS IS or RECONDITIONED, -----------------------------------------------------------, This line can be integrated with, ENGINE PLAST GRANULATOR (in photos), type BA 1.000.550.3, 75 kw drive, 12 mm screen (or bespoke), blower to scrap silo of extrusion line, installed power - used power in work: about 60-65% : 200

VERTICAL MIXER, 5.000 lt.capacity Total height approx 5.000 mm Max diam. 1,850 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 600 x 500 mm. Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 7,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 7.5, capacity: 5.000 lt.

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 1.250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

TECNOVA RECYCLING EXTRUDER, for PE PP PS PC ABS, Barrel with 130 mm screw 54 L/D, as new screw and barrel, n.2 degassing pumps for slightly moist or heavy prints, hydraulic screenchanger, hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet for complete management of the line, in need of reconditioning, capacity: 500-600 kg/h, conditions: reconditioning needed, type: 130 mm. 54 L/D 2xdegassing points 500-600 kg/h nominal throughput rate

APS PHE BRAND NEW ASP PHE for Milk pasteurisation CH - UX 10.5 5000 Liters per hour || Never used | Year 2022 | Contact us for more information ARSOPI PHE For Milk 5000 L/H Condition : New IN STOCK, Usage: Milk Pasteuriser, Capacity: 5000 L/h

Following Lub Oil Pump of MAK ENGINE is available for sale. Make ZPM GMBH Type WD5/WDU5-2-F Nr. 10010/6/2/2008 N 2000 1/min Q 685/780 L/min Bar 8/3

The Alfa Laval 518 separator is a type of centrifugal separator designed to separate liquids and solids based on their density. The height adjusting ring is an important component of this separator that plays a crucial role in the adjusting and controlling of the separation process., Key Features of the Height Adjusting Ring:, - Function: The ring allows for adjustments in the height of the separators bowl. This can impact the sedimentation rate and the efficiency of the separation process., - Applications: Used mainly in food processing, beverage production, and chemical industries for clarifying liquids or separating solids from liquids., - Material: Typically made from durable materials that can withstand the operational conditions of the separator, including corrosion resistance., - Installation and Adjustment: Proper installation and adjustment of the height adjusting ring are essen ...

Centrifugal pump FRISTAM Capacity: 2,500 l/h Flow rate: 2,500 l/h Operating pressure test 2.3 bar Motor: 2.2 kW Connections: suction side and discharge side: DN 80 - With chassis mobile with 2 swivel and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 850 mm Width: 500 mm Height: 1000 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost.

Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Schaltgr. Dyn 5 Code: 9129 IP:23 Primary: 500 V 12A Secondary: 399/231 V 380/220V 361/209V 15.15A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg More items - new and used - can be found in our shop! International shipping costs on request!

Consisting of 8 air cushions 69 x 69 cm Control panel 9 Hoses The system has only been used a few times and is in mint condition.

Complete line for carbonated soft drinks and carbonated mineral water capacity: 5.300 bph by 500 ml PET bottles neck size: PCO1881 working hours: approx. 28,000 hrs. consisting of: 1. Kosme KSB 4R PET stretch blow moulding machine year of manufacturing 2018 includes: preform hopper/elevator, preform unscrambler and ATS mould chiller. 2. Air conveyor 3. Caronation Techniques E0526 mixer year of manufacturing 2016 4. Filler Kosme Barifill with 16 filling heads year of manufacturing: 2017 with AVE capper year of manufacturing 1999 5. Heuft Basic inspection unit 6. Kosme labeller year of manufacturing 2018 7. Conveyors (mixed) 8. SMI LSK 30T shrink packer and tunnel packing format: 3x2 year of manufacturing 2005 9. Videojet 1530 date coder 10. Logopak case labeller year of manufacturing 2012 11. Robopac Roto ...

NEW Pallet fork 1200 x 120 x 50 mm FEM 2A 2.5 t load capacity Carrier width 1.20 m with Liebherr 506 attachment

BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 61.5 mm, Bottom bolt: Ø 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!

BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 61.5 mm, Bottom bolt: Ø 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!

BIG volume bucket 200cm with Liebherr 509 attachment, - Construction year: 2025, - working width: 200 cm, - own weight: 493kg, - capacity: 1.72 m3

NEW, Width: 200 cm, Dead weight: 493 kg, Capacity: 1.75 m³, suitable for JCB 520-50 mount

50,000 litre underground tank - brand new - according to DIN-EN 12285-1, single-walled, raw inside, professional insulation on the outside. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank has a DN 600 manhole with dome cover, screws and seal. Containers from the factory, freely charged. On request, the tank can be completely equipped with a fire water suction connection, the tank then meets the requirements of DIN 14230 - underground fire water tanks: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction pipe DN125 made of stainless steel - V2A, with Storz A fixed coupling and Storz A blind coupling, - 1 pcs DN100 vent pipe with stainless steel hood - V2A, - 1 piece anti-vortex plate mounted on suction line, - 1 sign "Extinguishing water extraction point", - 1 pc. soun ...

Clamping Force: 300 ton // Shot Weight (Max): 476 g

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Clamping Force: 420 ton // Shot Weight (Max): 1555 g

Key data: 1451 KW, 1500 1/min

Complete CHP packge, contenarized unit includes: - Gas engine, generator, genset controller, gas train - lube oil module - ventilation - exhaust gas heat exchanger - GCB, - 0,4/20KV transformer -auxiliaries contorler

Diagonal Fan, 230V, D350mm, 5000m³/h, EDR 36-0080.0658, MAICO, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, have never been used and are completely new. Diagonal fan, 230V, 960 watt, D350mm, 5000m³/h, Type EDR 36-0080.0658, MAICO, new Overall length 397mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and cour ...