132,779 used machines on RESALE, but how to find them? Machine Search
Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for hi ...
Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design f ...
Auction-ID: A7-45992-75
Pneumatic cylinder, screw-in cylinder, round cylinder, double-acting ROMHELD 1175 - 100 piston diameter: Ø 40 mm Rod diameter: Ø 16 mm stroke: 50 mm thread: M50 x 1,00 5 thread length: 94 mm New ! Dimension ( Pneumatic cylinder ): 123 x 50 x 50 mm Dimension ( Packaging ): 155 x 70 x 65 mm
Strip cylinder HÖBRIGER-ORIGA Ø 40 x 500 stroke series 120
Pneumatic cylinder NORGREN Ø 100 stroke: 500 mm with passive piston rod clamping
Pneumatic cylinder JOUCOMATIK Ø 125 stroke: 500 mm
Spray fitting ITW DEVILBISS AGMD 515U AIR: 9 bar MAT: 14 bar CYL: 7 bar Dimensions: 48 x 56 x 113 mm
Linear guide carriage STAR 1651-514-10 rail width: 34 / 45 mm New ! Dimensions: 160 x 140 x 55 mm
Welding Fume Extraction LINCOLN NORWELD DF-500 Volume flow: 500 m3/h System pressure: 1000 mm/Wg ( mm water column ) - approx. 0.0.000 mm 098 bar Fan speed: 9200 rpm Operating voltage: 380 V 3AC Power consumption: 5.5 kW connection diameter ( inside / outside ): 2x Ø 27 / 32 mm, 1x Ø 70 / 75 mm motor: ATB 132S 5.5 kW 380 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1800 x 1200 x 970 mm
22 inch saw blade, 58cc. unused Auction-ID: A1-40418-142
Hydraulic power unit ORSTA 52182 P: 12.5 Mpa (125 bar) motor: 1.5 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 750 x 400 x 1000 mm
Radio interference filter, LENZE E82ZZ55234B210 00450969 500 V New ! Dimensions: 340 x 100 x 70 mm
30-pipe, well-functioning machine in neat condition. Auction-ID: A1-40137-156
Auction-ID: A1-46501-2115
Trapezoidal Lead Spindle DÜRR, BEHR N1504 0036 ( N15040036 ) Thread Length: 510 mm Thread: Ø 11 mm Pitch: 5 mm Flange: Ø 160 mm New ! Dimensions: 900 x 170 x 160 mm
Mains filter B LENZE E82ZN22334B230 00459634 500 V 3 x 42 A New ! Dimensions: 410 x 240 x 120 mm
Equipped with: metal cage, monotrol control Auction-ID: A1-40137-173
Transformer, control transformer PAUL PRENGEL (PREDÜ) PDT 0.6 ( PDT0.6 ) VE: 500 V Va: 400 V 3.29 kVA New ! Dimensions: 190 x 190 x 100 mm
maximum number of results exceeded
please refine your search
500 € 
