129,386 used machines on RESALE, but how to find them? Machine Search
NEW, suitable for Martin HB100, Year of construction: 2019
Nominal force 100 t Stroke - 250 mm motor 3 kW more info on request
HHI-BBC Turbine Housing RPM - 17400 Only the turbine hull.
Working width: 3000 mm Sheet thickness: 4 mm Projection: 100 mm Backgauge: 500 mm Drive power: 380 V, 7.5 kW Space requirement: 3400 x 1600 x 1700 mm Weight: 4500 kg
Handy hydraulic punching bracket with 70mm projection. Maximum punching capacity Ø24mm in 16mm steel. A double-acting hydraulic unit with a maximum printing capacity of 700bar. This new machine comes from a warehouse clean-up. Additional punching tools would be sold separately.
Stationary high-pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min. Drive speed: 1500 rpm. Drive power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Year of construction: 2018 Condition: after service by Hammelmann in October 2020 only a few weeks run and for more than a year out of operation. In very good used condition.
pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Output: P624236 60 hl/h
Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...
Wolf head line and automatic mincing belt Delivery, samples and training - included in the price Price in euros without VAT: 3000
Size 46 cm Function filmcutter with light table and rotatary cutting wheel
Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...
cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Available in stock 1 x Used Rehobot Hydraulics 1000 bar Two stage Hand Pump Type PHS-374.36. The equipment is used but in good working conditions.
Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.
Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel
Herbort 159D Homogeniser Serial: 1 Stainless homogeniser, 150l stainless hopper, 3Ph
Specifications: - Printing capacity 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - punches in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg
Carel HeaterSteam UR020HL10S isothermal Steam Humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be normal tap water or completely demineralized water. The heat generated by the heating elements heats the water up to a temperature of 100 °C. Specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Vapour pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G outside More items - new and used - can be found in our shop! International shipping costs on request!
Rakes, tear hooks for excavator attachment for weight class 1–3to unused! Manufacturer Haener Baumaschinen Model HRR30-570 Condition Unused, never been in use, year of construction 2022 Weight class 1,–3to Width 300 mm Net weight 32 kg Stock Special price
used
offer 22273 Specifications: - Stroke 30 mm - Air consumption per stroke 5 l - Pneumatic connection 8 bar - Space requirement approx. W 500 x H 550 x D 500 mm - Weight approx. 70 kg - with: - Foot switch - Machine base mobile W 600 x H 830 mm - Various tools HUECK
Horizontal machining center Kafo HVC 500 :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 18i MB Tool connection: BT 50 Spindle power: 25Kw Number of spindle revolutions: 10000 Number of tools: 60 X Shaft Stroke: 720mm Y Axis Stroke: 650mm Z Axis Stroke: 650mm Rapid feeds linear axes X Y Z: 48m/min Pallet size: 500x500mm Pallet type: indexed Pallet degrees: 0.001 Maximum load allowed: 800Kg High cooling pressure: yes Pressure value: 20bar System with external tank with filter: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 4035mm Width: 5170mm Height: 3000mm Weight: 13000Kg
From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.
We offer you a Pöttinger HIT HT 13120 from a current recycling. Year of manufacture: 2023 First registration: - Condition: used, little used Hours: - Asking price: 19.500,00 EUR VHB Original price: 33.300,00 EUR Equipment / accessories / other information: Information according to the former invoice, correctness WITHOUT GUARANTEE! Working width 13.2 m Transport width 2.9 m Transport height 2.7 m Weight 2,375 kg 6 arms / rotors Gyro diameter 1.42 m PTO shaft 1 3/8" 6 pcs. 12 rotors with 6 arms Tine type: unequal leg length Tine quality: Super C Heavy Duty Tine Loss Protection Tires Chassis 340/55-16 Tyres rotor 16 x6.5-8 Warning sign & lighting Trailing drawbar Trailer position at the top Towing eye 40 mm Hydr. Adjustable limit spreading direction Other standard equipment Asset Manager: Klaudius Giolbas Phone: 0172 2796951 Mail: k.giolbasakf.de ...
Turbomixer: 200 litres, make: Henschel, model: FM200A, stainless steel, engine: 37/43 Kw 2-speed 1500/3000 rpm. Electrical panel.
We offer Doka lowering heads H20, used in Doka rental warehouse quality with 73% discount on the new price! Original price: 47,20€ net Special net price: 12,80€ net If desired, in a Doka reusable container 1.20 x 0.80m at a price of €190.00 net. Packaging unit: 40 pieces in a reusable container. Technical information Weight: 6.1 kg Length: 25 cm Width: 20 cm Height: 38 cm Surface : Galvanized If you have any questions, please call 0176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price
Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)
Key data: 250 t, 500 mm
(2018) 250t Hidroliksan Hydraulic Press Hydraulic Press with Integrated Die Cushion for Deep Drawing This 2018 hydraulic double-column press is a heavy-duty production unit designed for versatility, featuring a robust 250-ton capacity and high-quality Rexroth and SICK components. With its 100-ton integrated die cushion and generous 500 mm stroke, it is exceptionally well-suited for complex deep drawing and forming operations that require precise pressure control. Technical Details Machine Type: Hydraulic Double-Column Press Manufacturer: Hidroliksan Model: H-TYPE Nominal Force: 250t Return Force: 50t Stroke Length: 500 mm Speeds: Approach: 160 mm/sec Pressing: 5 – 15 mm/sec Return: 190 mm/sec Working Surfaces: Ram Plate: 1,000 x 800 mm Table Plate: 1,000 x 800 x 100 mm Components: Pump: REXROTH (71cc – 103 L/min) Motor: 22 kW (30 hp), 1,500 rpm ...
HofmannLangloch drill Brand Hofmann Type LL150 Year of construction Specifications: drilling depth max. 145 mm (drill head movement) Drilling length: max. 230 mm (table movement) Vertical drilling spindell run max.135 mm Drilling: Drilling depth limitation Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Motor power 1.3 kW Chuck 5 - 20 mm Condition: functionally tested
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm
Screen bucket 355mm unused Manufacturer Haener Model HSL280 MS03 ECO S355 Type screen bucket with quick-release frame MS03 Type Skeleton Excavator Bucket (Unused) Capacity 140 litres Weight 86kg
Stainless steel tunnel pasteurizer - new Hermis type TP 20 capacity: 22.000 cph - 500 ml Product: beer Year of manufacturing: 2025 Treatment area: 74 m² Number of modules: 7 pcs Treatment length: 13.500 mm Total number of zones: 10 pcs Total width: 6.500 mm Total length incl. infeed / discharge conveyor: 15.000 mm Total number of zones: 10 pcs Heating system: Plate heat exchanger outside of the pasteurizer Steam pressure: 3 bar Electrical system: Siemens S 7 - 1200 The main conveyor of the pasteurizer is made of plastic - Movex - Italy Active transfer - Rexnord - Holland Plate heat exchanger in outside of pasteurizer - Funke - Germany Pumps, stainless steel - Lowara - Italy Spray Nozzles - Lechler - Germany Steam valve - Burket - Germany Air supply system - SMC - Germany Electro peumatic - Fest - Germany Electrical control - Klöckner / Möller or ...
Hole unit Horizon HP-20A (Condition - like new - hardly used) Art.: PS5567 specialized module for high-quality punching. The HP-20A module will be integrated into the Horizon brochure line between the Horizon SPF booklet maker and the Horizon FC trimmer. In normal brochure sewing mode, it acts as a simple transition tape. However, it is worth activating it on the central control panel, it is immediately included in the duty cycle.
offer 22501 Technical data approx.: - working width 1020 mm - material thickness at 40 kg/mm² strength 1.5 mm -one. Backgauge adjustable up to 550 mm - front angle stop - Sheet metal hold-down - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg -mobile
used
Key data: 75 KW, 400 V
Combined heat and power plant (CHP) HBG 75 – Electric hail – 75 kW – YOC 2014 For sale is a combined heat and power plant type HBG 75 – E 0836 TE312 from the manufacturer Elektro Hagel, built in 2014. Technical data: Manufacturer: Elektro Hagel Type: HBG 75 – E 0836 TE312 Year of Make: 2014 Operating hours: approx. 65,000 h Engine: Gas gasoline engine, four-stroke Generator: Leroy Somer LSA 44.2 M95 C6S/4 Generator type: air-cooled synchronous generator Voltage: 400 V Electrical power: 75 kW Thermal power: 93 kW Total rated heat output: 196 kW Equipment: Launch system Gas pressure regulator and safety range Switchgear with PLC control Flue gas system with heat exchanger (AWT) Soundproofing Condition & History: Approx. 65,000 operating hours All maintenance was carried out regularly by a specialist company The ...
Sell a draft fan R 400 / 51-895 with a Siemens motor 1CV3182A
Technical data of the hydraulic grille for 3-roller sheets Faccin HAV 3172 used: Upper roller diameter: 720 mm Diameter of side rollers: 650 mm Power supply: 380V - 50Hz Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg
Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall ...
Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165
We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur
maximum number of results exceeded
please refine your search
