4008 h used for sale

Box feeder with steel scale strap and combined drive for belt and reel over pre-bed. Box dimensions: Approx. 2,000 mm x 750 mm x 500 mm high; incl. hopper (on box) with the following inlet dimensions: 1,600 mm x 1,200 mm x 360 mm high. Condition: Good substance; Motor must be overhauled, tape partially made viable.

The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.

Vacuum stainless steel planetary mixer mixer mixer mixer mixer used, as good as new condition State. As good as new Gross volume: 140 litres Attachment (batch) size: 35 to 100 litres max. 200 kg Max pressure: Vacuum 10mbar absolute up to 1200mbar absolute Process pressure range up to max 200 mbar Max operating temperature: 80°C Mixing tool: 7.5 kW Stirring head speed: 3-40 rpm Mixing tool speed: 10-120 rpm Total connection power: 25 kW Operating voltage: 3x 400 V / 50 Hz Control voltage: 230 V / 50 Hz or 24 V DC Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation with Siemens Symatic Multi Panel Touch / Siemens Simatic controller / Siemens frequency inverter with 2x mobile cylindrical exchangeable container (140 L ) with cooling jacket (20 L) made of stain ...

New machine 24-month warranty Benefits: + TOP value for money + Horizontal cutting machine, ideal for hamburger buns / rolls & cake bottoms + also suitable for cutting /halving baguettes, flatbreads, white breads + Products are guided with conveyor belt to the cutting station + comes with 3 cutting knives, double and triple cutting possible + Adjust cutting height in 5 mm increments + Machine on a robust, mobile frame, with locking wheels + equipped with two safety protective grilles + with upper transport/feeding belt + Tape speed can be controlled by rotary knob, for optimal adjustment of cutting results + with cleaning brushes on the conveyor belt + with quick coupling for belt cleaning + with pull-out collecting plate on the output belt + fast spare parts supply within 1-2 business days Technical data: - max product height: 90 mm - Bandwidth: 405 mm - Band spe ...

Force of pressure: 400 tons of working width: 4100 mm clear stand width: 3150 mm stand projection: 330 mm Electr. Supply: 400 V, 37 kW weight: 25 tons of space: 4100 x 2300 x 3910/530 mm

Centrifugal pump Manufacturer: Hilge Type: Hygia SII / 60A Usage area: wine pump Engine: Power: 12,5 HP Voltage: 380 V Revolutions: 2.890 U/min In very good condition!

Centrifugal pump, CRI5-2 A-CA-I-V-HQQV, 14,3m, 5,8m3/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 9m, Hmax: 14,3m, Q: 5,8m³/h 160 x 220 x 450mm hoch, 17kg, Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device d ...

Centrifugal pump, CRN1-3 A-CA-G-V-HQQV, 19,2m, 1,8m3/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 15,6m, Hmax: 19,2m, Q: 1,8m³/h 220 x 180 x 450mm hoch, 17kg, Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the devic ...

12 x 14.800 ltr. VA4 completely Pasteurization tank, Holvrieka, round, used standing on feet, it will be only the lower tanks sold, ø 2.48 m, H: 3,80 m (2 St. 7.60 m), incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 20 x 10.200 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 2,10 m, H zs.: 7,40 m, incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 36 x 5.000 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 1.50 m, H zs.: 7 m, incl. all armatures and pressure valves (excluding pr ...

Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.

DAUB oven THERMO-ROLL type RDTO SX02 Oven is in very good condition, General and thorough overhauled. Works like new. A good steam. Secondary circuit for the baking Chamber. Turbo equipment. incl. daub thermal oil boiler system with magnetic pump Sales including freight and installation upon request I also have to sell other model thermooel oven Price on request, Please give as oven you need type.

VA stainless steel mixing tank mixing tank with 2 storage tanks and diaphragm pumps of new condition Manufacturer: Mischmischmischtechnik Hoffmann & Partner Type: ERA 300 Y.O.M.: 2008 / No. 6151 Stirrer tank approx. 700 mm Stirring tank capacity 300 litres Stirring drive/gear motor - North SK 100L/4 TF; 220/380 V; 9.0/5.2 A; 50 Hz; IP55 - 2.20 kW; 1440/321 rpm Outlet at the bottom with pneumatic control valve System with 2x diaphragm pump "verder CX 20 ETZ". with 2x storage tank volume 220 liters each (approx. 550 mm x 1000/1400 mm) Stirring tank with filling hopper with collecting tray (all components are attached to the tub) see more pictures Total approx. 1800 x 1300 H 2300 mm The plant was previously used to mix glycerine.

Stream current meter, 2.0 EM-FIX-800-S0, Camfil / Handte, new -60% Current new price € 3600 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Flow monitor with manually adjustable throttle valve for adjusting the extraction volume. Limit value monitoring and signal when the required extraction air capacity is exceeded or not reached. - Air volume 600-800m³/h - Connecting flange DN 125 on both sides - length 650mm By measuring the volume flow and optimising the setting, high savings in maintenance ...

Three-point gripper, HGDD-63-A-G2, 1163048, Festo, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. 4 - 8 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

Three-point gripper, HGDD-63-A-G1, 1163047, Festo, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. 4 - 8 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I90L-I90S / 18t Payload Year of construction: new Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I90L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I90L Roll count: 12 / Material PU Height: 110mm Payload: 9t Weight: 57kg And Paralell suspension type: 90S Roll number 12 / Material PU Height: 110mm Connecting rod: 460-1145mm Payload: 9t Weight: 36 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 176t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer i ...

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Stainless steel containment system Glovebox with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used , as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178710 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1500 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.7 L oil; 3000/113 rpm 4x Load cells "Fli ...

Handtmann VF 616, year of manufacture 2006, vacuum filling machine for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar. The machine is immediately available and can be seen in Koblenz, Germany.

HIDROS LDK.070X-1C Brand:HIDROS Type:LDK.070X-1C Stock number:M21-4478 Cooling capacity:64 kW Number of fans:2 Refrigerant:R407C Refrigerant Content:19 kg Voltage:400 Volts Power consumption:42,8 A Dimensions:2650 x 1150 x 1800 mm Weight:930 kg Year:2010 Number in stock:2 piece(s) Price: Quotation request Description: Good air-cooled Hidros water chiller with 2 scroll compressors on 1 circuit. This chiller is equipped with a hydro kit (water pump + expansion vessel) and a Dixell 1PG 100D controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Free Cooling: Q= 43kW, P= 1.4kW at Tw= +15°C / Tambiant = +2°C and 20% Glycol). Visit also our website: used-refrigeration

Used decanter centrifuge HYSEP type MD43C with carbon steel bowl and screw. Internal surface of bowl and screw flinge are lined with wolfram-carbide. Bowl has a main drive 11/12.5 kW, 1455/1755 rpm , 50/60 hz. Screw is driven by hydraulic motor with power 5.5 kW. Working rotation speed of bowl 2800 rpm. Maximal sludge density 1.2 kg/m3, working temperature up to 80C. Machine is mounted on integrated frame and is equipped with feeding pump, polimer dosing device and control panel. Bowl cover, discharges and drive covers are designed in stainless steel. Technical documentation included.

Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg

HYGIA Pump Shaft FA2945 CNII x 28 complete

Planetary mixer RWH 200 - Mixing system mixer mixer stirrer as good as new condition with PLC control and monitor visualization Manufacturer: Mischmischmischtechnik Hoffmann & Partner Type: RWH 200/VA/VA/FU N°: 6150 ; Y.O.M.: 2008 State. As good as new Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation Attachment (batch) size: max. 200 liters with Siemens Symatic Multi Panel Touch / Control / Frequency Inverter with 1x cleaning container and 1x mixing container double-walled for cooling/heating (approx. H-640 mm (without rollers); 650/720 mm) The planetary mixer RWH200 is a mixing system in which eccentrically running mixing tools rotate once around their own axis and additionally around the container axis in the vertically arranged mixing container (exchange c ...

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Make: HIROSS Type: SLO920D02200X Power: 95 kW refrigerant: R407C 2 pcs. compressor Maneurop Compressor type: SZ175S4RA Price on request

Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...

Used pump for milk, made by HPM, model H 55 P. New 2002.

We offer you 10 used safety pins from the manufacturer Hovuma for sale. - incl. shipping throughout Germany - Technical data for the locking pin: System: Hovuma Included are: 10x Safety pins, used Material color: complete. galvanized Weight: 0.024 kg/pc for securing the longitudinal beams stand out against unintentional Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

PRODUCT LENGTH: 3-36 M, TRAVERSE DISTANCE: MAX. 31 M, 0.6 M/SEC.,

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Used cutting machine Hundegger K1 Manufacturer: Hundegger, DE Type: K1 Built: 1998 Condition: used, in operation, good Available from: 06.2021 composed of: 1. Fully automatic wood conveying with feed roller conveyor 2. Lower table swivel crosscut saw 3. Universal milling unit 4 -axis 4. Combination support for horizontal tools 5. 2x Drill Rig - Drilling direction horizontal drill length: 6. 1x Chain slot unit 7. Combination support for vertically working tools with a servo drive, cross-moving on linear guides and up to 5 vertically working, hub-controlled tool slides 8. 2x drilling rig drilling direction vertically from below 9. 1x Finger cutter Vertical 10. Marking device 11. Fully automatic beam turning station 12. Transport and positioning device 13. Electronic control with operator put, on Windows XP

Rebuilt lathe. Distance between centers: 750mm. Swing over bed: 500mm. Swing over carriage: 220mm. Spindle nose: 40,5mm. Motor power: 10cv. Equipped with universal chuck of 250mm. CE Protections in chuck and carriage and CE european certificate for second hand machines. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

New lathe. Distance between centers: 1500mm. Swing: 510mm. Swing over carriage: 320mm. Swing over gap: 760mm. Spindle hole: 80mm. CE protections and certificate. Equipped with chuck and steady rest.

Rebuilt lathe. Distance between centers: 1000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

M.No: 4090 Width: 70 cm Thickness: about 1 cm

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Rebuilt lathe. Distance between centers: 1500mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 1000mm. Motor power: 12,5cv. Spindle nose: 51mm. Equipped with universal chuck of 250mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: Steady rest. Optional: CE back guard

Rebuilt lathe. Distance between centers: 1500mm. Swing over bed: 575mm. Swing over carriage: 300mm. Motor power: 12,5cv. Spindle nose: 51mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 2000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 3000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 1500mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 2000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315 and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.