4008 h used for sale

Flaring system for sewage gas combustion - Mint- Manufacturer: Haase Maximum flow rate: 10 m³/h Gas pressure: 15-50 mbar Material: Stainless steel (V4A) Diameter: 150 mm Total height: 4.500 mm Emissions: CO2 and NOx to TA-Luft in the range of 50-100% of the maximum power. Flaring system is unused. Only a test run was conducted so as new and in very good condition! System is still built and can be visited at any time!

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

Central cylinder 8 colors Chambered doctor blade etc.

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

8 colors

Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

Cutting width approx. 700 mm Cutting height approx. 150 mm Saw blade diameter 500 mm Engine power approx. 4.0 kW hydraulic saw blade stroke

gravity filling valves O + H

cutting width 700 mm cutting height 150 mm saw blade diameter 500 mm motor power about 4.0 kW hydraulic Saw stroke

Cat. No. 07-1260 in very good condition Capacity: 35 cubic meters/h at 6.3 bar = 63 m water column Dimensions: Length: 120 cm Width: 48 cm Height: 48 cm Pump diagnostics: Pressure test: 4 bar Suction capacity: - 1.5 bar to -0.1 bar Pressure: 5.1 bar Power: 370 l/min., 22200 l/h Ampere min./max.: 16.5 6 bar DN 65 15 kW For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Standard equipment Manual heavy duty band saw machine with hydraulic Sawframe reduction for miter cuts from 45 ° left to right 65° Saw frame made of sturdy cast iron construction Massive round table Oil bath gearbox consisting of bronze wheel with hardened and ground steel worm Carbide Guide and adjustable roller bearings Quick clamping Vice with additional quick adjustment and quick release lever Electric high-performance Coolant pump Mechanical blade tension with electric blade monitoring Control tool Free delivery including packaging

technical data: Make: Möhringer Type: KW 2h Types No:: 126 450 Track gauge: 980 mm Support height: 430 mm electr. Page verst.: yes Feeding: yes Wooden feeder: from the left Drive: 0.37 kW Wheel diameter: 200 mm

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

technical data: Type: KW 1 vek Types No.: 126 200 Track gauge: 800 mm Support height: 410 mm Wheel diameter: 180 mm With electric side adjustment

1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min

QTY.2 ROLL STRIP CASTERS, STRI WIDTH: 1730 MM, THICKNESS: 4.0 - 10.0 MM, QTY: 1 TWIN BELT CASTER, STRIP WIDTH: 1930 MM; THICKNESS: 15.9 - 19.0 MM

Producer: Handtmann Type: VF 50/80 Output: 4 kW Weight: 450 kg Dimensions: Width 525 x length 844 x height 1600 mm Connection: 400V/50 Hz Vacuum filler HANDTMANN typ VF 50/80 - Without loading - MC control - Serving setting from 5 g to 1000 g - Filling pressure up to 55 bar - Portion and turn up to 420 portions / minute - Without calibration gear and without intestinal clamp - Capacity up to 2.600 kg / h - Funnel 80 L Portioning speed: 25 g = 420 portions / minute 50 g = 350 portions / minute 100 g = 250 portions / minute 200 g = 160 portions / minute Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

We have 3 pieces of high-grade steel chimneys of the brand Hobatherm on camp model: Hobatherm high-grade steel chimney system Compactly Z-13.1.2-03.2274 Baucert construction year 2004 the chimneys were 2 years in a BHKW in use an application. the height of the chimneys amounts to approx. 20 m and they are provided with an isolation. price each, from camp 6,500.00 ? + VAT

FOOD CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -one side coated underside of fabric with additional wedge bar, (11 mm wide x 8 mm high) in the Middle -endless -Food safe, white -Dimensions: 5,100 mm x 300 mm width x thickness length approx. 1.2 mm, surface with tunnels. -Tunnel approx. 20 mm in height, distance approx. 300 mm, tunnel length 245 mm, studs tip inclined (see photo) On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible)

Very good condition, like new. We plan and build the whole plant exactly for your needs. Are you looking for something else? Write us below!

Material: Steel We are going to overhoul this machine before the delivery. You can also get the entire system with all components you need.

CONVEYOR BELT CONVEYOR BELT, FEED DIRECT FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -Stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with textile plies, coated on one side, underside of fabric! -New, endless welded, 2-ply reinforced, with Central wedge guide rail on the underside, grooved profile 8 mm x 12 mm wide! -Dimensions: 7480 mm x 300 mm width x thickness mm 2 with 26 piece PVC T studs 30 mm high x 240 mm long (edge distance 30 mm each), obliquely set, -Band will be shipped with UPS! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Not is your de ...

FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.

Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Ladies and gentlemen, we are able to offer larger quantities of chopping chips in the long term. We would be pleased to have an inquiry. Yours sincerely Trade & Translations

Tray labels

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...

4st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 9.60 m and 178 4 ofen Totally total area 38.40 m and 178 - 80tins stove is in very good state general and thorough outdated and checked. functions as anew. very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement including. 8 stuck anew stikkenwagen sales incl. cargo and assembly price on inquiry

Specifications / Technical data S-1400/T 3-axis CNC-portal-machine and engraving machine (Attention: Pictures show the High-Z S-1400 with trapezoidal thread spindles, this differs exclusively by the spindles . With the T-variant of the high-Z CNC fraes machine, you acquire old-fashioned technology with the certain I-meat in TUeV-certified quality (EMC). The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T portalfraes machine achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can s ...

Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!

ADJUSTMENT LENGTH: 3 - 36 M, MAX. RAIL WEIGHT: 2500 KG,

SAW CARRIAGE DISTANCE: 610-710 MM, RANGE OF CUTTING: HEIGHT: 200 MM, WIDTH: 200 MM, DRILL DIA.: 12 - 40 MM; STROKE: 630 MM;

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-720/T CNC-Fraesmaschine und Graviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This series of mechanical engineering is just as applicable in the industrial sec ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

TURNING ANGLE: 180°, BILLET SIZE: QUADRATE: MAX. 240 MM, SQUARE: MAX. 210 x 250 MM, U & I FORM: MAX. 400 MM, WEIGHT: MAX. 5500 KG,

Fraesspindel HSD ES805 8.5 kW with admission HSK63