4008 h used for sale

General SKU336W851 MakeAlfa Laval LocationBarneveld CEcheck TypeM10-Mbase Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface38 m2 Size length1960 mm Sizes width520 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface38 m2 Capacity87,0 l Number of platens200 Plate sizes400 x 900 mm Connectionsø 100 mm Max. temperature-3°C/120°C Information No.30110-06881 Year of construction2018 Mounted on legscheck Floorspace0,55 x 2,00 m Total height1,25 m Weight860 kgPlate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

Heidenhain TNC 360 Monitor

Heidenhain LE 360C iD nr 270 641 39

Heidenhain HR 330 iD nr 251 534 11

General SKU379W1581 LocationBarneveld MakeApaco TypeAW 80-1000/12-187U (DTS) Pressure Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Verticalcheck Tube capacity1,6 l. Max. temperature0°C/+150°C Shell capacity3,2 l. Max. temperature0°C/+150°C Shell connectionsDN10 Cover connectionsDN10 Information No.520’433 Year of construction2010 Mounted on legscheck Floorspace1,10x0,35 m Total height0,30 m Weight100 kgShell and tube heat exchangersApacoHeat exchangers > Shell and tube heat exchangersBrand > Apaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any de ...

General SKU235X167 LocationBarneveld CEcheck MakeBertoli Type150 NLB HA 33037 Pressure Working pressure250 Bar Main Features Capacity3100 Ltr./Hr. Motor37.5 KW Pressure250 Bar Specified Features - Piston homogeniser MaterialStainless steel 1.4462 (Duplex2205), Stainless steel 1.4542 (17-4 PH) Piston homogenisercheck Capacity3,1 m³/h Twin stagecheck Number of pistons:3 Piston diameter40 mm Piston stroke76.2 mm Piston stroke volume0,38l InletDN50 OutletDN50 Motor37,5 kW, 400 volt, With pumpcheck Capacity3000 l/h Motor2,2 kW, 400 volt, 220 rpm Information No.4979 Year of construction2022 With switchgearcheck Floorspace1,55x1,60 m Total height1,20 m Weight1300 kgPiston homogenisersBertoliMills > Piston homogenisersBrand > Bertoli What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to ...

The Alfa Laval Bactofuge 618 is a specific model of separator designed predominantly for the food and beverage industry, particularly for the dairy sector. Here’s an overview of its key features and applications:, Key Features, - Centrifugal Separation: Utilizes high centrifugal forces to separate bacteria and particles from liquids, which significantly improves the quality and shelf life of products., - High Efficiency: Known for its efficient separation capabilities, effectively removing unwanted microorganisms and solids from liquids., - Hygienic Design: Built with food safety in mind, featuring materials and designs that comply with industry hygiene standards to minimize contamination risks., - Compact Size: Designed to fit into smaller spaces within processing plants, making it suitable for various production environments., - Automated Control: Many models feature advanced automat ...

Benhil Stand Alone Butter Hopper with temperature control outlet with warm water circulation. This machine is used for handling butter or feeding machines with direct feed competitions units. This has twin screw augers with in the hopper and on the outlet there are connections for hot/warm water circulation would you need to regulate the temperature of the product. The throughput is at 2000 kg per hour . The hopper is capable of receiving 25 kg blocks of butter at 8-10 degrees ., Capacity: 2000 kg/hr, Conditions of sale: As is” or Refurbished , Hopper: Twin Screw , Drive: Self driven by motor and belt with reducer , Outlet: Double jacket outlet for temperature Control , Location: In stock

We offer: Pallet racking, new Manufacturer: STOW is available several times. Scope of delivery for: 180 parking spaces other quantities also possible. 16 stud frames, approx. 6,000 x 1,100 mm 90 editions, approx. 2,700 x K125 x 50 x 1.5 mm 180 locking pins 32 Ground Anchor M 12 Technical data: Shelf height: approx. 6,000 mm Shelf depth: approx. 1,100 mm Max. load capacity per field: approx. 12,000 kg Max. load capacity per pallet: approx. 1,000 kg Max. load capacity per pair of trusses: approx. 3,000 kg (with evenly distributed load) Colour of the frames: blue Colour of the trusses: orange Shipping: Cheap shipping possible with inexpensive forwarding agent. Please inquire about the freight costs, stating your zip code and location as well as the desired item quantity. We offer a comprehensive range of new and used shelves and accessories and we ...

High-pressure pump in the container with ES 2 control – immediately ready for use For sale is a powerful high-pressure pump in a container, equipped with ES 2 control. The system is technically tested and 100% ready for use. Technical data: Machine number: A8.01174.xxxx WP 2250 / 2500 bar Flow 38 /34 lpm Registration date: 10/2008 Total operating hours: 11,960 h Drive: Caterpillar C7 engine Power: 186 kW Engine completely renewed at 10,350 operating hours High Pressure Pump: Sleeves and pistons operating hours: 2,870 h Condition & Notes: Used, technically flawless Regularly serviced Ready to use Ideal for industrial high-pressure and cleaning applications Financing: Financing possible (by arrangement)

REF-2705 APV GAULIN 15-3.0 B HOMOGENIZER 1000 LITRES/HOUR Manufacturer: APV Brand: Gaulin Model: 15-3.0 B Serial no.: 1-02.452 Year: 2002 Single-stage homogenizer for liquids Overall dimensions (mm): 1,400 x 900 x 1,600 (LxWxH) Capacity: 1,000 l/h Max. temperature: 50 °C Homogenization pressure: 200 bar Electric motor: 11 kW/3x380 V/50 Hz Inlet/outlet connections: 50/65 mm Made of stainless steel, including some AISI 316 components N.B.: This homogenizer can be purchased separately or as part of an APV complete pasteurization system for fish broth also advertised on this site.

Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Angled dowels and picket holes are easy thanks to the rotatable drilling unit realizable. Motor pole-switchable, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Start of the motor with practical handle switch Precision Chuck with Two Inserts 16mm and M10 Thread Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing The desired drilling heights can be achieved for each drilling level with a handwheel and digital counter , the changeover is then pneumatically done from the front Transve ...

WOMA 325 Z P30 high-pressure system – 1000 bar – replacement engine Scania – ready for use For sale is a WOMA 325 Z P30 high-pressure plunger pump, installed in a MAN vehicle. The system is 100% operational, technically and visually very well maintained. The machine is equipped with a Scania DS11 replacement engine (see nameplate). Robust, proven technology – ideal for demanding industrial cleaning jobs. Technical data: Pump manufacturer: WOMA Type: 325 Z P30 Max. operating pressure: 1,010 bar Flow rate: 134 l/min Speed: 1,800 rpm Plunger Ø: 30 mm Power consumption: approx. 230 kW Drive: Scania Replacement Engine (DS11) Installation: MAN vehicle Operating hours: approx. 13,649 h Condition: Fully functional very neat overall condition Ready to use No known defects The facility is ideal for: industrial high-pressure cle ...

HP Jet Fusion 5200 – Industrial MJF production system including extensive accessories, For sale is a HP Jet Fusion 5200, an industrial 3D printing system based on the Multi Jet Fusion (MJF)-Technology designed for the economical serial production of plastic parts with high dimensional accuracy and mechanical durability., The system will be supplied including Post Processing Station, two Build Units, two powder barrels as well as a pallet truck offered and thereby presents a complete, production-ready system for industrial use., ---------------------------------------------------------------, System components included in the delivery:, - HP Jet Fusion 5200 printing unit, - HP Post Processing Station (powder removal & processing), - 2 × Build Units (for parallel production / reduced downtime), - 2 × powder barrels, - 1 × transport forklift for build units and material handli ...

This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information.

This lathe machine was manufactured in 2015. Equipped with a D160 Hydraulic chuck and a D45mm main spindle bore, it boasts reliability and precision. Featuring a 12-piece turret head, VDI-40, and hydraulic programmable tailstock, it ensures versatile machining operations. With 42597 hours of power on and immediate availability, this HAAS ST-10 presents an opportunity for efficient production. For further details, contact us.

This Hyundai Wia SE2200LMSC Lathe was manufactured in the year 2021 in Korea and has 3316 production hours, of which 538 are spindle hours. It is equipped with a Hyundai Fanuc i Series Smart Plus control unit. The machine has a spindle speed of 3500 rpm.

This SMTCL HTC 63300 was manufactured in 2007. A robust horizontal turning machine featuring a swing diameter over bed of 810 mm and over saddle of 580 mm. It includes a 500 mm chuck, a spindle speed range of 50 - 1800 rpm, and an auto turret with 12 tool positions. Ideal for handling large workpieces with its 3000 mm distance between centers. Contact us for more information about this machine.

This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information.

This HYUNDAI WIA L300 LMC Lathe was made in 2019. It is equipped with a Siemens Sinumerik 828D control unit. The machine has a spindle speed of 3000 rpm.

This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information.

This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine.

This HITACHI SEIKI HT 20SII was manufactured in 1991. A horizontal turning machine featuring a turning diameter of 200 mm and a turning length of 400 mm. It includes a Multi-Seiki control system and various accessories. Consider the opportunity to buy this HITACHI SEIKI HT 20SII horizontal turning machine. Contact us for more information.

This MAZAK NEXUS HCN 6000 Horizontal Machining center was made in the year 2006 in Japan. It is equipped with a MAZATROL 640m control unit and has 4 axis. The machine has a spindle speed of 10000 rpm. 2 units available

This 3-axis HAAS SL-30 was manufactured in 2001. A robust horizontal turning machine featuring a 3400 rpm spindle, Ø76mm bore, and a 10 chuck. It includes a tailstock, 12 x VDI40 tool stations, a toolsetter, and a conveyor. If you are looking to get high-quality turning capabilities consider the HAAS SL-30 machine we have for sale. Contact us for more information.

This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained.

This HAAS SL-30 was manufactured in 2008 and comes with a KID80 barfeeder. A robust horizontal turning machine featuring a 22 kW, 3400 rpm gearbox, and a 102 mm bore. It includes a Hainbuch SK80, chip conveyor, tool setter, part catcher, and a KID 80 bar feeder. If you are looking to get high-quality turning capabilities, consider the HAAS SL-30 machine we have for sale. Contact us for more information.

This LVD HST 25/6 hydraulic shearing machine was manufactured in 1993. It is a robust and reliable piece of equipment, ideal for shearing applications. Consider the opportunity to buy this LVD HST 25/6 hydraulic shearing machine. Contact us for more information.

This HILALSAN HKM-115 was manufactured in 2022. A robust hydraulic shearing machine, its ideal for those looking to get high-quality shearing capabilities. Contact us for more information.

This OKUMA & HOWA HL-20 was manufactured in 2003. A robust horizontal turning machine featuring a maximum turning diameter of 350 mm and a work length of 460 mm. It boasts a spindle speed of up to 3,200 min-1 and a chuck size of 203 mm. If you are looking to get high-quality turning capabilities consider the OKUMA & HOWA HL-20 machine we have for sale. Contact us for more information.

This HAAS ST-20Y lathe, manufactured in 2019, features a Y-axis, tailstock, automatic tool probe, and chip conveyor. With a spindle speed of up to 4000 rpm and driven tools supported by a C-axis, it offers strong capabilities for complex machining. If you are looking for a high-quality turning solution, consider the HAAS ST-20Y we have for sale. Contact us for more information.

This HARDINGE Quest 51 SP was manufactured in 2001. It features a swing over bed of 520 mm, a maximum turning diameter of 356 mm, and a spindle speed up to 4200 RPM. The machine includes a 12-station live tooling turret with integrated C-axis and Y-axis for multi-axis machining. Control is managed via a 21iT CNC system. Consider the opportunity to buy this HARDINGE Quest 51 SP horizontal turning machine. Contact us for more information.

This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine.

This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information.

This HAAS SL-30TBHE was manufactured in 2008. A robust horizontal turning machine featuring a spindle speed of 3400 1/MIN, 22 kW motor power, and a swing over bed of 762 mm. It includes a 12-position turret, hydraulic tailstock, and both 3 jaw and collet chucks. Dimensions are 3900x2000x1900 mm. Consider the opportunity to buy this HAAS SL-30TBHE horizontal turning machine. Contact us for more information.

General SKU236W265 MakeAPV Gaulin LocationBarneveld CEcheck Type5-4.3B Pressure Working pressure300 Bar Main Features Capacity500 Ltr./Hr. Motor5.5 KW Pressure300 Bar Specified Features - Piston homogeniser MaterialStainless steel 1.4462 (318LN) Piston homogenisercheck Capacity500 l/h Twin stagecheck Number of pistons:3 Piston diameter21 mm Inlet25 mm Outlet25 mm Motor5,5 kW, 380-415 volt Information No.1-02 . 471 Year of construction2002 Floorspace1 x 0,8 m Total height1 m Weight540 kg Extra Specifications- hydraulic unit installed for pressure control - high-pressure gauge is defectivePiston homogenisersAPV GaulinMills > Piston homogenisersBrand > APV Gaulin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine.

This HWACHEON TTC-10 horizontal turning machine was manufactured in 2015. It features a swing over bed of Ø 500 mm, a maximum machining diameter of Ø 400 mm, and a maximum machining length of 203 mm. Equipped with a Fanuc Oi-TF Plus control, it offers rapid traverse rates of 30 m/min in both X and Z axes. Consider the opportunity to buy this HWACHEON TTC-10 horizontal turning machine. Contact us for more information about this machine.

This 4-axis KAFO HMC-500 was manufactured in 2019 and features a robust FANUC 0i-F control unit. With a spindle speed of up to 10,000 rpm and a tool magazine capacity of 40 tools, it ensures efficient machining. The machine has a pallet size of 500x500 mm and a maximum workpiece size of Ø700 mm by 800 mm. Consider the opportunity to buy this KAFO HMC-500 horizontal machining centre. Contact us for more information about this machine.

General SKU403S966 LocationBarneveld MakeAlfa Laval (SE) TypeTL10-BFG Pressure Working pressure7 Bar Main Features MaterialStainless steel Surface40 m2 Size length1500 mm Sizes width375 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4401 (316) Plate heat exchangerscheck Heating surface40 m2 Capacity36,6 ltr / 37,5 ltr Number of platens81 Plate sizes375x1500mm ConnectionsDN100 (4x) Max. temperature100 degr. C Information No.30110-16415 Year of construction2017 Floorspace1,2x0,5 M Total height2 M Weight900 Kg Extra Specificationsincluding 1 spare end plate and 3 spare intermediate plates. material sealing: EPDM checkUNUSED Plate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

This 4-axis Starrag Heckert Dynamic CWK 400D was manufactured in 2005. It features a Siemens Sinumerik 840D control system, spindle speeds up to 10,000 rpm, and a dual pallet system with rapid 8-second pallet changes. The machine includes a tool magazine with 60 positions and a high-capacity coolant system. Ideal for complex machining tasks. Contact us for more information about this machine.

General SKU344U850 MakeBee International TypeDeBee 2000 No.2517 Mach.No.2517 Year of construction2002 Pressure Working pressure3100 Bar Main Features Capacity60 Ltr./Hr. Motor7.5 KW Pressure3100 Bar Specified Features - Piston homogeniser Piston homogenisercheck Capacity60 Ltr./h (depends on operating pressure, product viscosity and nozzle type) Number of pistons:2 Inlet1 Outlet¼ Motor7,5 kW With frequence controllercheck MaterialAlumina, Tungsten carbide, Zirconia, Stainless steel 1.4401 (316), Stainless steel 1.4542 (17-4 PH) Information LocationBarneveld Floorspace1,5x0,6 m Total height1,3 m Weight450 kg CEcheckPiston homogenisersDebeeMills > Piston homogenisersBrand > Debee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system.

This 4-axis HELLER MCH 350 was manufactured in 2006, featuring a Siemens 840D PL control system and a robust spindle capable of 7,000 rpm. It includes a HSK 100 tool clamping system and a large magazine with 234 slots. The machine offers a substantial working area of 1250 x 1000 x 1000 mm and a pallet size of 800 x 800 mm. For more information about this machining centre, please reach out to us.

Heat exchanger Hombach Fabr.Nr 55687, Type W/8/200/6R/2K/3.0 CU, 9,5/ AL-L1 Year of manufacture 2013 used, ready for use

This Kitamura HX500 ia was manufactured in 2008. It features X-Y-Z Axis Travels of 735, 610, and 610 mm, a table size of 500x500 mm, and a spindle speed of 13,000 rpm. The machine includes a BT40 spindle mount, a 50-position tool changer, and a FANUC 16 i MB control system with a 10.4 color LCD. Consider the opportunity to buy this Kitamura HX500 ia horizontal machining centre. Contact us for more information about this machine.

Frame Inner Dimension: 1450 x 1650mm Gas Type: Propane Operating pressure: 7 bar

General SKU373X901 MakeZürcher Type25 m² No.2933 Year of construction2014 LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell13 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Hastelloy Surface25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L), Stainless steel 2.4602 (Hastelloy C-22) Heat exchangercheck Verticalcheck Heating surface25 m² Tube capacity300 Ltr. Number of tubes:199 Tube diameter23 mm Tube length1700 mm Max. temperature-30/200°C Shell capacity260 Ltr. Shell diameter500 mm Shell length1900 mm Max. temperature-30/200°C Shell connectionsDN80 Information Floorspace1,10 x 0,80 m Total height1,90 m Weight650 kg CEcheck Extra SpecificationsWithout si ...

This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, its ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine.

This 4-axis HELLER H2000 horizontal machining center was manufactured in 2017. It features a Siemens 840D Solution Line control, rapid traverse of 60,000 mm/min, and a spindle speed of 10,000 rpm. The machine can handle workpieces up to 720 mm in diameter and 850 mm in height, with a maximum table load of 600 kg. Consider the opportunity to buy this HELLER H2000 horizontal machining center. Contact us for more information about this machine.