129,230 used machines on RESALE, but how to find them? Machine Search
- Hand & foot operation - integrated anvils - massive substructure - Hammer weight: 25 kg - Stroke: 250 rpm - Lifting height: 250 mm - Extension: 200 mm - Cylinder: 125 mm - Work shoehe: 765 mm - Engine power: 3 kW - Voltage: 400 V - Ground WxHxD: 460 x 1520 x 970 mm - Weight: approx. 670 kg
Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Fully automatic capsule sealing machine. Incl. PLC: Siemens-S5, type: 954, Operating controll: Lauer PCS 095. Format part for capsule size. 3. Output: up to 100'000 capsules/h. Furthermore incl. Visco system TRAWID VM, Sensor O.B.D, Control H, No. 04712479. The controll device is self made (Comp. Wetzel). Gelatin-vessel is A2/ double jacket, heatable with IKA stirrer RW 16- basic incl. agitator OPTI- Color, pump Watson - Marlow 505 S, two forward- and two backward pipe.
ė engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping ė velen styles (the rubber surface), diameter 30 mm. the preparation of Į (i) the measurements x 350 x 655 mm, 505. the preparation of Į weight 20 kg.
Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!
Industrial replacement monitor 12.1 TFT monitor High-quality anti reflective glass incl. cable with 15-pin. D-Sub-Plug Technical Data: TFT-LCD Monitor 12.1 inch Display/Resolution 800 x 600 Pixels Brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display range 246 x 185 mm External power supply 12V Operating power unit -10c +60 celectricity consumption max. 30 W connection D-Sub 15-pol, 2 row OSD control Brightness, contrast control, auto-adjustment phase position, clock, instalment speech, reset connection cable, power supply The Front panel is not included in the offer. The installation is carried out on the existing front panel. 24 Month Warranty! More monitors, new and used on request! ; New!
-reliably high load capacity across the entire beam length thanks to homogeneous web material -secured component load capacity, as all of the straps are machine stress graded and load-tested -consistent product characteristics owing to high dimensional stability -multiple savings compared to squared timber due to improved load capacity combined with lower weight -Certification EN 13377 -Produced in Austria from Doka Industrie The length of the H20 smart beam varies from 2,45m until 5,90m. Costs: 5,00 EUR/rm For more information or an appointment, you can contact me at any time. Phone: + 43 664 1296830 or Email:office@berger-international.at
Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden
Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Drop Roller for Hard Candy with electr. Engine roller size. : approx 58mm x 177 mm table size : approx. 750mm x 620mm x 750mm (lxwxh) Packing dimensions : approx. 30” x 30” x 25” (wooden box suitable for export) Net Weight : approx. 200 kg. Gross weight : approx. 250 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Machine with working table, electrical engine and gear box. Also available, machine hand driven, without electrical engine We offer this machine in as-is where it is condition delivery time: appr. 8-12 Weeks after payment in our warehouse
Many thanks for your interest on our new Heating/cooling table for chocolate or sugar-, candy dough, please find follow our offer: Heating table / cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 1200 x 800 x 800mm / or (lxbxw) : 800 x 600 x 800mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: folded plates made of stainless steel Standing on 4 feet, (square tube 50 x 50) optional height adjustable with two wheels and two castors water heated, closed system with electr. Thermostat, heat exchanger, circulation pump, safety valve 0.5 bar) Plate heat exchanger technical changes reserved Wir bieten diese Maschine als Neumaschine zum Verkauf an. I offer this machine as New machine
Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...
- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified
Ball valve Hiltbrand Rp 2" 2/2 Way ball valve with full passage max. 16 bar Female thread Rp 2" Case and ball: stainless steel 1,4408 Seal: PTFE Medium: Neutral, clean, liquid and air Medium temp.: -10°C to +115°C without autom. Default Setting time for 90°: approx. 17 sec. Case: Aluminum 230 V, 0.3 A Switch-on time: 75% Cable glands M20 Type of protection: IP67 Ambient temp: -10°C / +50° C Emergency actuation: inner hexagon Limit switch: Potential-free (on/to) The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
- Capacity 10,000 litres - Stainless steel container V2A - Gearbox new product - Swivel arm made of standard steel New product - Container made of stainless steel V2A new product - Mixing screw stainless steel V2A new product - Pneumatically driven new product - Drive motors 11 kW & 1.0 kW new product
Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900
1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug
1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug
Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Used single stage homogeniser made by Hoyer Pack. Capacity 600 L/H. Bal type valve. 6.5 KW motor. Set of seales and plungers ware changed lately. New 1996.
Used rebuild KHD Humboldt Wedag model S3?01 decanter. New 1992. Cylinder made of hardened steel (it does not rust but not stainless) lenght of cylinder 1370 mm, cone lenght 110 mm. Screw made of steel also hardened. Drum speed 2200 rpm. Motor 30 kW with clutch dydrodynamic made by Voith (easy start). Lubrication by ump. New bearings casindgs, transmission belts, all bearings are new, seals. During the rebuild drum and zscrew ware balanced. Suport fram with antivibrators. Manual available in Polish. Capacity approx. 20000 L/H.
System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Höchstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.
Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg
Internal gear pump Manufacturer of Bucher Hydraulics Type QT52-050/51-100 L 252-5 HPN 692337 PD 180/100 bar VG 050/100 cm³/rotation Nr 37381094 Used
Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.
Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54
Huber Rotamat Feinstrechen, used Gap 5-12mm Qmax to 840 l / s Operating modes: Manual, automatic, backward More info and pictures on request.
POTATO BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry.
Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.
Grenzebach HGB new device, 1a State ca 300 BH Uea dimensions: 590h x 170 x 190 d cm Weight ca. 1.8 t 78 cm with toothed belt conveyor Rail length 500 cm from the ground 26 cm
Horn pump Cabinet consisting of: -2 x Horn pump MP 5 (700 l / min) -> For heating oil, diesel and bio-diesel Technical data: Max capacity: 700 l / min Supply voltage: 400 / 50 V / Hz Capacity: 2, 5kW Inlet: DN 80 Pressure connection: DN 80 Maximum suction height: 4, 5 m Protection class: IP 44 Pump Cabinet is painted and fully functional! The pumps can be expanded like at extra charge out of the closet, but we would prefer a sale as a complete package!
Handheld control unit Schleicher type HGB 2P-0301 for Battenfeld
Helium leak detector Manufacturer: Pfeiffer Type: HLT 260 Condition: Tested and ready for use Connection: 230V Delivery time: from stock (e.g.V.); ready for use
Filling height control in beverage bottles
Number of boring units // Diameter boring units (mm) 9x 3.0 5x 3.5 1x 4.0 3x 4.5 6x 5.0 9x 5.5 31x 6.0 2x 6.5 19x 7.0 18x 8.0 1x 8.5 9x 9.0 5x 10.0 9x 11.0 2x 13.0 3x 14.0 1x 15.0 1x 16.0 2x 18.0 1x 19.0
Gabelkopf H20, verzinkt, Neu Ausführung mit 4 Winkelprofilen und Rohransatz mit Langloch, passend in alle DIN oder Euro Norm Gewicht 3,20 kg
High performance blower fan dust blower Built in 1967 Type 1000 275 R MD 63 m³ / s 1000 u/min 71.3 kw Manufacturer Heinrich Lühr dust technology
with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled
1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY
Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price
EWD HDN/SV with width adjustment TOP ZUSTAND ! (1982/2009) WATER-CLOSED FUEHRS, SIDE BRETTERKAPPSAEGE... Through width 735 Passage shoe710 Hub 600 Speed max. 300 Feed speed 0-15 m/min Feed capacity 8.5 m/min Total weight 12 t SPALTKEIL ARTA C WITH SIDE WAREKAPPSAeGE Very well maintained facility little cut ! HDN-SV STATUS: VERY GOOD
Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.
ZIEGLER C41-20A - air forging hammer Hammer weight: 20 kg Strokes: 270/min Lifting height: 200 mm Projection: 180 mm Cylinder diameter: 115 mm Hammermasse: 90 x 50 mm Engine power: 2,2 kW Voltage: 400 V Dimensions WxHxD: 460 x 1110 x 820 mm Weight: 380 kg Equipment: Hand - and foot operation, integrated Ambos Base optional
Lift trucks - counterweight forklifts - drawbar forklifts without battery to hobbyists pickers, also called "order pickers", are used for the sprinking of pallets in pure storage operation. The types LO2.0 M and LO2.0 are designed for the predominant access in the first level , the operator can also reach into the 2nd level with the help of the integrated ascent in the corner back. For the intensive picking in the first and second level, the type LO2.0 L was equipped with additional platform hub. With the foot switches in the ground for electric lifting and lowering, the operator has both sides free when picking. ; as is
Hydraulic unit 250 l, 4 kW, max. 45 bar More: Hydro-aggregator FORTUNA Sperry Vickers, 200 l tank, with various valves pump: G-PA3-25-EK1-20R (see picture)
Te Koop: Endress & Hauser flowmeter DN 25 Pro level 63F
maximum number of results exceeded
please refine your search
.jpg)
.jpg)
