4008 h used for sale

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220V 800W -Length: 140 mm -Diameter: 13 mm -Price: per piece -Quantity: 12 available -Weight: 0.2 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

Hydraulic filter -Type: HY13479 -Quantity: 10 available -Price: per piece -Weight: 0.5 kg/piece

Turret Handler Ismeca Semiconductor NX16 Specifications: Supplier name: Ismeca Malaysia Construction year: 2011 Accessories: AssLabeling Laser A000 966 Find more here - / Contact us at -

Anchor plate, door holding magnet, door magnet -Type: ASS 65 -Quantity: 3 available Price: per piece -Weight: 0.3 kg

Hydraulik shear OMAG CE204 - 2050 x 4-5 mm, Information about technical data are not binding., Machine available subject to prior sale., Cutting lenght: 2050 mm, Cutting thick: 4-5 mm, Throath depth: 200 mm, Backgauge travel: 600 mm, Main motor power: 4 Kw, Approx net weight: 3.100 Kg, Accessories: Manual back gauge

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating el ...

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Number: 65x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 18 mm -Drain: Ø 60 mm -Number: 26 available -Price: per piece -Dimensions: 540/440/H300 mm -Weight: 4.3 kg

2011 HACO HSLX 6008 Hydraulic Shearing Machine Technical Condition: operational Manual: Attached Specifications: Mild steel capacity: 8 mm Cutting length: 6020 mm Cutting angle adjustment: 105°-3° Number of plate holders: 33 Number of strokes max. min. angle 4-8 Stroke backgauge: MOT(1) version: 1000 mm SAB(2) version: 1000 mm/s Working height 1130 mm Motor power: 15 kW Weight approx.: 26 tonnes Voltage: 3x400V Year of construction: 2011 Find more here - / Contact us at -

Manufacturer : Schnupp Type of machine : Hydraulic Press Capacity: 2,500 tons Technical details in picture Find more here - / Contact us at -

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel 400 N/mm2: 13.0 mm Adjustable rip fence: 1000 mm Adjustable cutting gap adjustment Adjustable cutting angle adjustment Working height: 940 mm Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9,6 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

HADEF electric chain hoist Payload 1,500 kg Lifting speed 1/4m/min with electric chassis Travel speed 4 / 16 m / min Chains 7/8 x 23 mm Complete electrics and traction motors for crane bridge available - Compact design -

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

For sale is a used Nordson Problue 10 hot melt machine

For sale is a used Nordson Problue 4 hot melt machine. Various application heads as well as hot glue hoses (new and used are available)

Tetra Pak Aseptic Homogenizer 300 – Factory New (2024) High-performance aseptic homogenizer designed for advanced liquid food processing. The Tetra Pak Aseptic Homogenizer 300 delivers exceptional reliability, precision engineering, and high production capacity for demanding industrial applications. Built in 2024 and in factory-new condition, this machine has 0 working hours and has never been installed in production, making it an ideal solution for processors seeking modern aseptic homogenization technology. General Information - Manufacturer: Tetra Pak - Model: Aseptic Homogenizer 300 - Year of Manufacture: 2024 - Condition: Factory new - Working Hours: 0 hours (never installed) Technical Specifications - Maximum Capacity: 12,960 L/h - Working Pressure: 250 bar - Number of Pistons: 3 - Piston Diameter: 63 mm - Valve Design: Mushroom type with stainless steel sea ...

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Refer to code 1184 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Key data: 730 mm, 730 mm, 740 mm

Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006

pressure: 120 t stroke: 400 mm dayligth: 900 mm feed down: 5,8 mm/sec feed up: 9,5 mm/sec Heads: 200x125 mm total power requirement: 6 kW weight of the machine ca.: 1250 kg dimensions of the machine ca.: 1900x1000x2450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 400 mm Frame Width: 450 mm column daylight: 1300 mm cylinder diameter: 170 mm work height max.: 900 mm Front light range: 1400 mm Lateral light range: 450 mm total power requirement: 7,5 kW weight of the machine ca.: 2600 kg dimensions of the machine ca.: 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t stroke: 400 mm dayligth: 900 mm Heads: 225x135 mm feed down: 6,2 mm/sec feed up: 9,8 mm/sec total power requirement: 6 kW weight of the machine ca.: 1.300 kg dimensions of the machine ca.: 1640x1000x2550 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t stroke: 400 mm total power requirement: 4,0 kW : 7,4 mm/s : 11,5 mm/s Heads: 160x95 mm weight of the machine ca.: 725 kg dimensions of the machine ca.: 1560x850x2400 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm dayligth: 900 mm distance between columns: 300 mm Heads: 175x115 mm feed down: 7,6 mm/sec feed up: 13,4 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

Halliburton HD 400 Pump Container . EX-container, VOLVO diesel engine D16. Diesel tank. Fan. Halliburton with 6" valve - can be replaced.

Acoustic hoods für IMA edge banding machines in various versions and dimensions available from stock Modifications / new lacquering available for a surcharge.

Size: 560 x 770 mm

For sale I offer a hydraulic spreader / lifting wedge from Holmatro with accessories. The hydraulic spreader is an unused Exhibit with slight traces of storage. Further condition please see the pictures. Details: Holmatro HVLV 16 S 2, wedge for vertical lifting Operating pressure: 720 bar Stroke: 20 mm Min. insertion opening: 9 mm 16 ton with spring retraction Shipping available for an extra charge. Hydraulic spreader is workshop tested and sold immediately ready for use with new UVV test and can be tested on site. Other accessories available on request. # Holmatro # Hydraulic spreader # Lifting wedge # Spreader

Offer 25080 Sliding - panel shelf with 10 movable material stands Specifications: - Stand - compartment dimensions / support dimensions W 3000 x H 1800 mm - Shelf depth / installation area 180 mm - Max. load capacity per compartment 2000 Kg - Slide-in bracket bracket - Track rail L 4750 mm - Total space requirement approx. L 4750 x H 2200 x D 4000 mm - Weight approx. 3000 kg

sheet width - max.: . mm plate thickness: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Blade length 300 mm The technical data are manufacturer or operator specifications and therefore not binding for us. We reserve the right to prior sale, only our business and sales conditions apply.About usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopYou want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Laweco, Type: Hydraulikhubtisch, Year: 1988, Lifting power kg: 7000, Length mm: 3800, Width mm: 2000, Total hight mm: 470, built-on roller conveyor: no, Year :1988

Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995

Manufacturer: Hydraulikhubtisch, Lifting power kg: ca 2000, Length mm: 1.400, Width mm: 1.200, Total hight mm: 770, built-on roller conveyor: yes, FREE TEXT: 2 Stck vorhanden,

Manufacturer: Laweco, Type: Hubtisch, Year: 1993, Lifting power kg: 1.000, Length mm: 3.100, Width mm: 1.000, Lifting hight approx. mm: ca 1.500, Total hight mm: ca 500, built-on roller conveyor: yes, Wight approx. kg: ca 1800, Year :1993

Manufacturer: Laweco, Type: Hubtisch, Year: 1993, Lifting power kg: 1.000, Length mm: 3.100, Width mm: 1.000, Lifting hight approx. mm: ca 1.500, Total hight mm: ca 500, built-on roller conveyor: yes, Year :1993

Manufacturer: Hydraulikhubtisch, Lifting power kg: ca.3000, Length mm: 2800, Width mm: 2000, Total hight mm: 700, built-on roller conveyor: yes,

Manufacturer: Trepel, Type: Hydraulikhubtisch, Year: 1972, Lifting power kg: 1000, Length mm: 2900, Width mm: 1700, Total hight mm: 300, Carriage: yes, built-on roller conveyor: no, FREE TEXT: ohne Schaltschrang inkl Hydraulistation, Year :1972

Manufacturer: Istel, Type: Hebevorrichtung Motorisch, Lifting power kg: ca.200, Length mm: 1600, Width mm: 790, Lifting hight approx. mm: 1100, Total hight mm: 250, Hand switch: yes, Safety strip: no, Total power kW: 1,1, CE-Sign: no,

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Wight approx. kg: 1400, Year :1996

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999

Manufacturer: Trepel Hebebühne, Type: EH40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Year :1996

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,