4008 h used for sale

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: unfortunately without type designation -Piston rod: Ø 16 mm -Holes: Ø 10 mm / Distance: retracted 220 mm -Dimensions: Ø 35 x 248 mm -Weight: 1.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 200 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 110 mm -Type: unfortunately without type designation -Piston rod: Ø 18 mm -Hole: Ø 13/16 mm / Distance: retracted 470 mm -Dimensions: Ø 65 x 500 mm -Weight: 5.1 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 30 mm / Distance: retracted 430 mm -Dimensions: Ø 70 x 495 mm -Weight: 8.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 35 mm / Distance: retracted 540 mm -Dimensions: Ø 110 x 635 mm -Weight: 20.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 75 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Holes: Ø mm / Distance: retracted 340 mm -Dimensions: 400/90/H130 mm -Weight: 9.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 63 mm -Type: unfortunately without type designation -Piston rod: Ø 28 mm -Holes: Ø 40 mm / Distance: retracted 320 mm -Dimensions: Ø 88 x 400 mm -Weight: 8.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 160 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm / M20 -Holes: Ø 25 mm -Dimensions: Ø 70 x 410 mm -Weight: 6.4 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 185 mm -Piston rod: Ø 20 mm / M20 -Dimensions: 475/110/H65 mm -Weight: 4.5 kg

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: for dividing head -Shaft: Ø 50 x 515 mm -Dimensions: see photos -Dimensions: 645/90/H200 mm -Weight: 7.8 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: HL width 80 mm -Length: 360 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 360/80/H75 mm -Weight: 3.9 kg

Hydraulic motor, gerotor motor ORSTA Parchim 05 80/16-01 TGL10881 Nominal pressure 16 Mpa New ! Dimensions 250 x 110 x 110 mm

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg

Gate Gate Pump, Hydraulic Pump with Motor ORSTA TGL 10885 ( TGL10885 ) 32 6,32 3 16/1 KMR132 114 A G TWS TGL11856/0 140 bar 7.5 KW 11445 rpm 380 / 660 V Dimensions 1000 x 360 x 380 mm

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder -Type: HL width 80 mm -Dimensions: see photos -Quantity: 1x holder available -Dimensions: 180/140/H115 mm -Weight: 2.9 kg

rotary table, rotary indexing table, dividing head, dividing head -Dividing head:Dividing head with three-jaw chuck -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm -Spindle bore: Ø 25 mm -Dimensions total: 510/480/H250 mm -Weight: 69 kg

Crane block, crane hook, load hook, single hook -Crane hook: load hook with holder -Load capacity: kg -Hook opening: 32 mm -Dimensions: see photos -Number: 2x load hooks available -Price: per piece -Dimensions: 130/90/50 mm -Own weight: 0.7 kg/pc.

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Hydraulic Pump, Dual Hydraulic Pump (Part) ORSTA C 10-3 R ( C10-3R ) TGL 10859 Dimensions: 150 x 140 x 120 mm

Hydraulic Pump ORSTA, VEB HYDRAULIK NORD Type: CA 0,0,000 4 ( CA0.4 ) TGL 17-747404 Flow rate ( V ): 0.4 m3/h pressure ( p ): 1.0 MPa ( 10 bar / 10 kp/cm² ) Rated speed ( n ): 1425 - 1450 rpm Shaft diameter: Ø 10 mm Wavelength: 23 mm Groove width: 3 mm Pump foot: 95 x 98 mm Hole spacing ( parallel to shaft ): 70 mm Hole spacing ( transverse to shaft ): 70 mm Hole diameter: Ø 7 mm New ! Dimensions: 160 x 145 x 120 mm

Hydraulic Motor, Gear Motor ORSTA 20/20.20 0-110 TGL 37070 ( TGL37070 ) rated torque: 57 Nm Speed range: 240 - 3000 rpm Rated speed: 1500 rpm Nominal pressure: 20 MPa ( 200 bar ) Nominal displacement volume: 20 cm3 Shaft: Ø 25 mm, with taper 1 : 10 thread: M16 x 1.5 flange: 156 x 132 mm New ! Dimensions: 205 x 135 x 160 mm

Switching valve, distributor, hydraulic valve ORSTA IIB HNN012.009 Pn 16 MPa used, tested ! see also HY660, HY1100 as new and HY907 as used article ! Dimensions: 90 x 90 x 120 mm

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamp sleeve, sliding gate sleeve, helmet rail branch -Manufacturer: Helmet, branch for helmet rail -Type: Width 65 mm -Dimensions: see photos -Number: 1x branch available -Transport dimensions: 960/390/H90 mm -Weight: 9.9 kg

Hydraulic pump ORSTA No. 022 Flow rate: 4 x 10 dm3/min 32 bar shaft Ø 17 mm motor: 2.8 KW 1450 rpm Dimensions: 210 x 175 x 155 mm

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm -Weight: 20.9 kg

Hydraulic Pump ORSTA (FPE HYDRAULICS) A16 R ( A16R ) (TGL 10859) Dimensions: 145 x 115 x 95 mm New !

Hand Lever Valve, Hydraulic Valve ORSTA HNN 012003 Pn 16 MPa Qmax 16 l/min New ! Dimensions: 110 x 85 x 225 mm

Hydraulic Cylinder ORSTA B2-63/40x100 TGL 10906/7 Piston diameter: Ø 63 mm Rod diameter Ø 40 mm stroke: 100 mm Pn 16 MPa Dimensions: 400 x 110 x 90 mm

Hydraulic Cylinder ORSTA S1-160/70x63 4688-8200/1/000 Piston diameter: Ø 160 mm rod diameter: Ø 70 mm stroke: 63 mm Pn 16 MPa Dimensions: 580 x 270 x 270 mm

Hydraulic pump, gate gate pump ORSTA 12,5 10 16/1 ( 12,51016/1 ) TGL 10885 ( TGL10885 ) shaft: Ø 25 mm flange: Ø 130 mm used, tested ! Dimensions: 390 x 160 x 160 mm

Hydraulic pump, axial piston pump DENISON PVT 38 2P1C C03 S00 ( PVT382P1CC03S00 ) 029 80097 ( 02980097 ) shaft: Ø 38 mm flange: Ø 130 mm used, tested ! Dimensions: 520 x 320 x 450 mm

Dual hydraulic pump with motor ORSTA 1,1,000 62U 120 ( 1,62U120 ) TGL 37069 12,5 16/1 TGL 10885 motor: 3 kW 220 / 380 V IP54 Dimensions: 860 x 310 x 300 mm

Hydraulic pump with motor ORSTA 6,3/20-110 TGL 37069 motor: 4 kW 220 / 380 V IP44 New ! Dimensions: 580 x 300 x 250 mm

Hydraulic Cylinder ORSTA S1-200/125x3200/0 TGL 10906 Piston diameter: Ø 200 mm Rod diameter Ø 125 mm stroke: 3200 mm Dimensions: 3940 x 640 x 430 mm

Hydraulic Pump, Double Hydraulic Pump (part) ORSTA C 10-2 R ( C10-2R ) TGL 10859 used, tested ! Dimensions: 180 x 105 x 95 mm

Electrohydrostatic Duck Switch ORSTA A01 TGL 10952 ( TGL10952 ) Pn: 32 MN/m² New ! Dimensions 210 x 80 x 130 mm

Dual Hydraulic Pump with Motor ORSTA 4/20.2 - 230 ( 4/20.2-230 ) 4/20.0 - 260 ( 4/20.0-260 ) TGL 37069 Motor: 2.2 kW 220 / 380 V IP54 New ! Dimensions: 680 x 280 x 245 mm

Dual hydraulic pump with motor ORSTA 25200 260 ( 25200260 ) 10/20.1 - 230 TGL 37069 motor: 3 kW 220 / 380 V IP44 New ! Dimensions: 650 x 265 x 250 mm

Hydraulic Pump ORSTA TGL 10859 ( TGL10859 ) A2.5 R shaft: Ø 14 mm flange: 85 x 75 mm New ! Dimensions: 95 x 85 x 75 mm

Dual Hydraulic Pump with Motor ORSTA, PZL 4/16.0-260 32/20.1-230 TGL 10889 Motor: 7.5 kW 380 / 660 V IP54 New ! Dimensions: 860 x 350 x 290 mm

Hydraulic pump ORSTA TGL 10859 C16 - 3R shaft: Ø 22 mm Flange: 115 x 95 mm New ! Dimensions: 190 x 115 x 95 mm

Hydraulic Pump ORSTA TGL 10859 ( TGL10859 ) C16 - 2R shaft: Ø 22 / 14 mm flange: 115 x 95 mm New ! Dimensions: 190 x 115 x 95 mm

Hydraulic Pump ORSTA TGL 37069 ( TGL37069 ) 16/16.0-220 New ! Dimensions: 220 x 145 x 100 mm

Hydraulic Cylinder ORSTA S1-140/90x160/0/000 TGL 10906 Piston diameter: Ø 140 mm Rod diameter: Ø 90 mm stroke: 160 mm New ! Dimensions: 245 x 245 x 550 mm

Hydraulic Pump ORSTA C10-3R TGL 10859 New ! Dimensions: 190 x 115 x 95 mm

Hydraulic pump ORSTA A1,6 R ( A1,6R ) TGL 10859 shaft: Ø 14 mm flange: 75 x 90 mm used, tested ! Dimensions: 95 x 75 x 90 mm

Hydraulic pump ORSTA 2 x C6,3 - 2R ( 2xC6,3-2R ) TGL 10859 shaft: Ø 14 mm Flange: 90 x 75 mm used, tested ! Dimensions: 260 x 75 x 90 mm

Hydraulic Pump ORSTA C25 - 3R ( C25-3R ) TGL 10859 Nominal pressure: 16 MPa ( 160 bar ) Nominal flow rate: 25 dm3/min Nominal speed: 1450 rpm shaft: Ø 22 / 18 mm, spline shaft profile, 6 wedges flange: 112 x 92 mm used, tested ! Dimensions: 200 x 115 x 95 mm