4008 h used for sale

Heat pump / chiller, air-cooled, reversible Type: CYGNUS TECH HCY 051 MTA S.P.A. CYGNUS TECH HCY 051 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crankpan heating, (no pump, no tank). Cooling capacity kW 14,1 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 2.41 Ambient temperature 32 °C Heating capacity kW 15,4 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 2.66 Ambient temperature 7 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5,6 Max. current (A) 11.4 Starting current circuit (A) 71 Protection Class: IPX4 Dimensions: Depth mm 550, width mm 1420, height mm 1288 Weight kg 197 Connection Rp 1" Serial No.: 2200371602 Year of construction: 2021 Condition: Optical 2, Technically ok us ...

Manafacture: Lu-Ve Type: HCE 58 (LH) CU/AL Dimensions: 2350 x 1130 x 835 mm Fan diameter: 700 mm Fan power: 470 W Fan voltage: 230 V Coolant quantity: 18.88 dm³ Maximum pressure: 3 MPa

Horizontal milling machine Table length 65 cm x 400 mm y 120 mm Z 300 mm Length 1.20 m Width 1 m Height 1.60 m Vice

Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Horizontal bending machineSimasv - T 95 MACH-ID 7640 Make: Simasv Type: T 95 Year: 1994 Show price REQUEST QUOTATION Table Length:         1900mm Table Width:          880mm Max. pressing force:  95 Beam stroke:          330mm max. work piece height:200mm max. die height:      250mm Working speed:        1000mm/min. Return speed:         2500mm/min. Power:                7.5kW Capacity flatt:       120 x 180 x 5mm x mm Capacity bar:         120 x 120 x 5mm Length:               2000mm Width:  ...

Package HKS63 Tool Mounts composed of 1 piece Holex HSK 63-M8x101 for screw-in milling cutter 1 piece Holex HSK 63-M12x101 for screw-in milling cutters 1 piece Holex HSK 63-M12-126 for screw-in milling cutters 1 piece HSK 63-M12-132 for screw-in milling cutter 2 pieces Garant HSK-A63-4-80 shrink chuck 1 piece Garant HSK-A63-8-50 for screw-in milling cutter 5 Garant HSK 63 M8-101 for screw-in milling cutters 1 piece Hoffmann HSK-A63-8-65 for Weldon 1 piece Hoffmann HSK-A63-16-80 for Weldon 1 piece Goblet HSK 63x6x65 for Weldon 1 piece Goblet HSK 63x10x65 for Weldon 1 piece Goblet HSK 63x12x80 for Weldon 4 pieces WNT 84 754 622 transverse groove cutter mandrel

Rounds: 3 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machinePBT - ARKUS 12 PC200 MACH-ID 7647 Make: PBT Type: ARKUS 12 PC200 Control: PC 200 TOUCH Year: 2000 Horizontal and vertical:Horizontal Shaft Ø:               40mm Number of rolls:       3 Stroke X-Axis:         200mm Capacity flat:         70 x 12 x R=700mm Capacity Tube:         60 x R=600Ø x mm Capacity bar:          30 x 30 x R=300mm Capacity T-Profile:    60 x 60 x 7 x R=800mm Working speed:         0-18mm/min. Length:                1125mm Width:                &nbs ...

Rounds: 3 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machineSAF Curvatrici - CS 60  Digitral readout position upper roll Left & Right mode Horizontal & vertical positioning 3 sets off rolls included Hydraulic adjustment upper roller Horizontal and vertical:H + V Shaft Ø:               50mm Number of rolls:       3 x 165 mm Horizontal:            Horizontal Stroke X-Axis:         200mm Capacity flat:         60 x 12 x 800mm Capacity Tube:         2" x 800Ø x mm Capacity bar:          35 x 35 x 800mm Capacity T-Profile:    60 x 60 x 900mm Working speed:        & ...

High quality machine housing, 548 x 129 x 200cm hoch, KMS, mint condition -90% Special price ! If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. The parts have minor signs of disassembly. High quality machine enclosure, length 5480, width 1285, height 2000mm, Consisting of: - Total 12.24 running metres of enclosure, - High quality frame with removable panels, all top painted, - 2 large double doors without locking system with plexiglass, - The back consists of 7 removable elements of plexiglass and sheet metal - The top is made of plexiglass all round - The roof consists of slide-on frames with plexiglass edging. - The elements are all very strong and of high quality - Incl. the many machine feet and the  ...

Manufacturer: Lu-Ve Type: HCE 58 (LH) CU/AL Overall dimensions: 2350 x 1130 x 835 mm Fan diameter: 700 mm Fan electric power: 470 W Fan voltage: 230 V Refrigerant Type: R134A - R404A- R22 Refrigerant volume: 18.88 dm^3 Maximum pressure: 3 MPa

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 1000 x 600 mm -Depth: 500 mm -Edge: 14 mm -Price: per piece -Number: 1x available -Dimensions: 1030/630/H500 mm -Weight: 26 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 390 x 285 mm -Depth: 120 mm -Drain: Ø 52 mm -Faucet: Ø 28 mm -Dimensions: 495/350/H130 mm -Weight: 2.4 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Number: 65x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

Hydraulic filter -Type: HY13479 -Number: 10x available -Price: per piece -Weight: 0.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm -universal: applicable -Dimensions: 660/180/H100 mm -Weight: 28 kg

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

CNC positioning of backgauge Manual knife play adjustment Cutting length: 3100 mm Max sheet thickness st 45: 16 mm Strokes/min: 7 > 28 str/min Adjustable cutting device: 0,1 > 2,5 mm Backgauge: 1000 mm - CNC Elgo Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 21 kW Length: 5750 mm Depth: 2380 mm Height: 2280 mm Weight: 13 ton

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 003 H750 -Voltage: 24V/335Hz -Dimensions: 120/90/H75 mm -Weight: 0.3 kg

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 012 H750 -Voltage: 24V/335Hz -Dimensions: 115/90/H60 mm -Weight: 0.3 kg

Foldable backgauge (= unlimited plate length) Cutting length: 3100 mm Max sheet thickness st 45: 12 mm Backgauge: 1000 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 15 kW Length: 4000 mm Depth: 2150 mm Height: 2200 mm Weight: 7,7 ton

1. UHT: - GEA Finnah - YOM: 1991 - Capacity: 1200 l/h 2. Steep tank: - Rieger Behälter GmbH - YOM: 2008 - Cooling mantle - Volume: 6,250 l - Max. Pressure: 3.5/-1.0 bar 3. Homogenizer - GEA Nirosoavi NS3037 H - YOM: 2001 - Capacity: 2,000 l/h - 2 stages, max. 250 bar

Long knife, sheet metal and round steel shears -Sheet metal shears: stable -Material: flat steel -Round: up to 15 mm -Square: up to 15 mm

Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

Drill head, drill bit, milling cutter -1x recording drawing with the photos -Mill 5x: Ø 16 x 40 carbide tipped -Cutter 2x: Ø 15 x 40 carbide tipped -Cutter 2x: Ø 14 x 40 carbide tipped -Cutter 2x: Ø 12 x 40 carbide tipped -in wooden box -Dimensions: 250/175/H75 mm -Weight: 2.7 kg

Sahinler 4R HSS 25-380 4 rolls plate rolling machine Working length : 2500 mm Maximum thickness : 30 mm

Cutting thickness, mm - up to 8; Cutting length, mm - up to 4050; Cutting angle, mm - 1.5; Number of hydraulic clamps, pcs - 17; Cuts per minute (metal / stainless steel) - 13/20

Amada HFE 220-3 CNC Hydraulic Press Brake 220 Ton 3000 mm bending length 8 axis Machine is in good working condition Working hour : 17700 Tools are included

Sahinler 4R HSS 20-460 Hydraulic 4 rolls plate rolling machine

Manufacturer: SMG / Feintool Type: HFA 6300 Year of construction: 1988 Total force: 4000-6300 kN Ring serrated force: 320-3200 kN Counter holding force: 130-1300 kN Safety distance: 153 mm Trailing distance max. 10 mm Closing speed: 120 mm/s Plunger stroke beu max tool height: min.-max. 30-150 mm Tool clamping surface at the top: 900 x 900 mm Tool clamping area at the bottom: 910 x 1350 mm Tool installation height max: 410 mm Tool installation height min: 330 mm Main drive: 90 kW Total connected load: approx. 120 kW Weight of the press: approx. 31 t

Heat pump / chiller - switchable - water / water cooled, Type: OCEAN Tech HOCT 200 MTA S.p.A. OCEAN Tech HOCT 200 are water-cooled heat pump / chiller for indoor installation without hydraulic circuit (pump, accumulator) incl. crank pan heating, phase monitoring. An external dry cooler unit is not included in the offer. Cooling capacity kW 53.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.25 Cooling water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 13.5 Heating capacity kW 67.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.51 Cooling water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 11.7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 24 Max. current (A) 40 Starting current circuit (A) 162 Protection class: IP22 Dimensions: Length mm 1735, Width mm 660, Height mm 120 ...

Heat pump / chiller - switchable - water / water cooled, Type: OCEAN Tech HOCT 200 MTA S.p.A. OCEAN Tech HOCT 200 are water-cooled heat pump / chiller for indoor installation without hydraulic circuit (pump, accumulator) incl. crank pan heating, phase monitoring. An external dry cooler unit is not included in the offer. Cooling capacity kW 53.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.25 Cooling water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 13.5 Heating capacity kW 67.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.51 Cooling water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 11.7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 24 Max. current (A) 40 Starting current circuit (A) 162 Protection class: IP22 Dimensions: Length mm 1735, Width mm 660, Height mm 120 ...

Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...

Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...

Agilent 1100 HPLC system, serviced, ready for use incl. control PC = Ready-to-use all-in-one Agilent HPLC system (1100 series), including configured control PC, tubing, and connectors. Condition: Very good, used, currently maintained and checked by a specialist company. Warranty: 3 months (if delivered by a specialist company) The modules: Agilent (HP) On-Line Vacuum Degasser - Model No. G1322A (Made in Japan) Agilent (HP) Quaternary Pump - Model No. G1311A (Made in Germany) Agilent (HP) Autosampler - Model No. G1313A (Made in Germany) Agilent (HP) Column Thermostat - Model No. G1316A (Made in Germany) Agilent (HP) DAD Detector - Model No. G1315A (Made in Germany) Agilent (HP) Solvent Tray Configured control PC with monitor, keyboard and mouse Software: Chemstation We will be happy to answer any questions you may have about the offer and provide you with further  ...

Machine in good technical condition, currently disconnected. Maximum cutting length: 3150 mm Maximum cutting thickness: 10 mm Minimum sheet cutting thickness: 1 mm Total power consumption: 22 kVA Machine weight: 11.5 t

Capacity: 3100 x 8 mm (steel) Cybelec NC backgauge Rear entry protection

Capacity: 3100 x 8mm Electric Elgo NC back gauge good condition inspection possible

The machine is in good technical condition. Max. length of cut sheet: 2500 mm Max. tl. cut sheet metal: 12mm Machine dimensions: 3000 x 2200 x 1900mm Machine weight: approx. 10500kg In agreement, the possibility of inspection in progress.

Electrically adjustable back gauge Manual cutting angle adjustment Light screen protection at the front and rear 1348 power hours

Capacity 2000 x 4 mm Adjustable backgauge Walk-in protection at the rear

Capacity 3100 x 8 mm Equipped with newer touch controls Adjustable backgauge, cutting angle and cutting clearance Elevated table at the rear

This Mazak HCN-5000 Horizontal Machining center was manufactured in the year 2018. It is equipped with a Mazak Smooth G control unit. The machine has a spindle speed of 18000 rpm.

This MAZAK H400N Horizontal Machining center was manufactured in the year 1991 in the United Kingdom. The machine has 4 axis and a spindle speed of 10000 rpm.

This Mitsui Seiki HU40A Horizontal Machining center was manufactured in the year 2005 in Japan. The machine has a spindle speed of 12000 rpm.

Hardness tester Wolpert Testor HT 2001 Year of manufacture 1979 Hardness testing Rockwell Brinell Vickers Weight 185 kg Data Adjustment tool Unchecked!

Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price

Infratec VarioCAM HDx 625 Professional infrared camera Thermal imaging camera 5.6 " TFT thermography measuring system with IRBIS software remotely controllable via PC Condition: Used TOP condition - purchase 2020 - functionally tested - rewriting of the SW license included Thermography measuring system and infrared thermal imaging camera Type: VaroCAM HDx 625 Manufacturer: InfraTec GmbH, Dresden, Germany Date of purchase according to invoice: 18.09.2020 Typical areas of application are: - Therographic inspection of electrical and mechanical installations and aggregates - Optimization of components and assemblies - Material investigations - Control of process temperatures -Quality assurance - Building thermography Execution: - 5.6 " TFT monitor for the live image - Detector format 640 x 480 -Distance measurement - permanete autom. Focusing - Spot editor (tem ...

Manufacturer: Trepel, Type: Hydraulikhubtisch, Year: 1972, Lifting power kg: 1000, Length mm: 2900, Width mm: 1700, Total hight mm: 300, Carriage: yes, built-on roller conveyor: no, FREE TEXT: ohne Schaltschrang inkl Hydraulistation, Year :1972

Waters Acquity UPLC-MS System, Used Acquity UPLC-MS System by Waters from 2009, used very little, with systematic proof of maintenance, from a large pharmaceutical company, with 6 months warranty and training and installation at the customer's site. . The system is sold with an additional set of spare parts in the form of an identical UPLC system (without MS). Each system can be viewed and tested in operation. The UPLC-MS system consists of the following parts: - SQD mass detector - Sample Organizer - Sample Manager - PDA detector - Binary Pump Manager - Column Manager Price complete system with additional modules as spare parts

Manufacturer: Laweco, Type: Hydraulikhubtisch, Year: 1988, Lifting power kg: 7000, Length mm: 3800, Width mm: 2000, Total hight mm: 470, built-on roller conveyor: no, Year :1988