400 cw used for sale

Specifications: Control: Fanuc 0i-TD Hours: 12009 Capacity: - Swing over bed: 970mm - Swing over cross slide: 600mm - Centre height: 490mm - Width of carriage: 885mm - Width of cross slide: 350mm - Distance between centers: 4300mm - Width of bed: 560mm Headstock: - Chuck size: 605mm - Spindle bore: 153mm - Spindle nose: A2-11 - Spindle speed: 6.5 ~ 600rpm - Spindle power: 22/26kW Turret: - Tool size: 32mm - 4 positions Tailstock: - Quill diameter: 165mm - Quill traverse: 200mm - Tailstock center: MT#6 - Body movement: motorized Machine is equipped with: - 2 chip conveyors - Motorized tailstock body - Steady rest - Tooling as showed in pictures - Auction-ID: A1-45752-7

Industrial Generator / Power Unit – Technical Specifications General data: Power: approx. 690 kVA Voltage: 400 V Frequency: 50 Hz Speed: 1000 rpm Current: approx. 995 A Protection class: IP23 Duty: Continuous (S1) Ambient temperature: 40 °C Power factor (cos φ): 0.8 Weight: approx. 2750 kg Control system: Full control cabinet included Siemens PLC (S7-type) Protection relays Circuit breakers and busbars Description: High-capacity industrial power unit or generator system designed for continuous operation under demanding conditions. Equipped with a complete control cabinet featuring Siemens PLC automation, protection relays, and electrical distribution components, ensuring reliable and safe operation in industrial environments. Auction-ID: A7-46032-3

Unused; rated output 28kW/35kVA; standby 30.8kw/38.5kva; 50HZ P.F. 0.8; RPM 1500; 3 PHASE; Genset controller with LCD; 72L diesel tank; Oil tank 13L; 2 batteries; ATS 100A Aisikai; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7310 Auction-ID: A1-45901-3

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45901-89

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-45901-4

Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-22

Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-21

Unused; ATS; rated output 20kw/25kva; standby 22kW/28kVA; P.F. 0.8; RPM 1500; 72 liter tank; 3 PHASE; altenator type VG-184FS; Aisikai ATS 36A; Oil tank 13L; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; Frequency 50Hz; 4 cylinder; 4-Stroke; V In-line; Water Cool; Electric start Auction-ID: A1-45901-2

40L/min; Packing 1060x765x770mm; 5652 Auction-ID: A1-45901-703

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-45901-5

Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-19

Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-18

Unused; ATS; rated output 20kw/25kva; standby 22kW/28kVA; P.F. 0.8; RPM 1500; 72 liter tank; 3 PHASE; altenator type VG-184FS; Aisikai ATS 36A; Oil tank 13L; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; Frequency 50Hz; 4 cylinder; 4-Stroke; V In-line; Water Cool; Electric start Auction-ID: A1-45901-82

Unused; rated output 28kW/35kVA; standby 30.8kw/38.5kva; 50HZ P.F. 0.8; RPM 1500; 3 PHASE; Genset controller with LCD; 72L diesel tank; Oil tank 13L; 2 batteries; ATS 100A Aisikai; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7310 Auction-ID: A1-45901-85

Cutting Machine – Technical Specifications General data: Slide travel: 500 mm Workpiece support height: 500 mm Cutting capacity (oxy-fuel): With 1 torch: max. 300 mm thickness With 4 torches: max. 100 mm thickness With 6 torches: max. 60 mm thickness Cutting capacity (plasma): With 1 plasma torch: depending on plasma system power Speeds: Working speed: up to 12000 mm/min Positioning speed: 15000 / 20000 / 35000 mm/min Gas inlet pressures (oxy-fuel cutting): Cutting oxygen: 11.5 – 12.0 bar (OmniFlow) Preheating oxygen: 9.0 – 10.0 bar (OmniFlow) Heating oxygen: 1.8 – 2.0 bar Air: 5.0 – 6.0 bar Water: 2.0 – 6.0 bar Gas inlet pressures (plasma cutting): All gases: 12.0 bar Description: Industrial cutting machine designed for oxy-fuel and plasma cutting applications. The system supports multiple torch configurations and offers high cutting capa ...

40L/min; Packing 1060x765x770mm; 5652 Auction-ID: A1-45901-702

Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-20

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-45901-86

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-45901-91

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45901-88

Double swing gate complete set (height: 1,400 mm) Details: Description: Double bar mesh fence gate complete set (height: 1,400 mm) Details: 1.4 m x 3 m, complete set including post and handle set/fastening material Colour: Anthracite (RAL 7016) Gate: Frame 60/40 (1,400 mm high and 3,000 mm wide) Posts for concreting: 2,400 mm (80/80) Door panel: 6/5/6 Mesh size: 50mm x 200mm Number of doors: 2 Number of posts: 2 Location: 32602 Vlotho Auction-ID: A1-46075-47

Galvanized steel; top profile 50x30x2, bottom profile 50x30x2, cross braces fi 12, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461 Auction-ID: A1-45756-18

MAN TGS 33.540 6x4 BL – Truck with Loading Crane General data: Manufacturer: MAN Model: TGS 33.540 6x4 BL Serial number (VIN): WMA30SZZ9BM567249 Year of manufacture: Unknown Condition: Used Power: approx. 540 HP Drive: 6x4 Gross vehicle weight: approx. 26000 kg Dimensions (L x W x H): approx. 10000 x 2550 x 3800 mm Equipment: Hydraulic loading crane Crane: Kogel, 10 ton-meter, hydraulic telescopic arm + rotor + grab Reach: approx. 9 – 10 m Lifting capacity: approx. 3500 kg (close range) to 1000 kg (full extension) Maximum pulling force: 200 kN Trailer coupling Timber stakes for log transport Reinforced chassis Multi-axle configuration Description: Heavy-duty truck equipped with a hydraulic loading crane, designed for forestry, recycling, and construction applications. The vehicle allows self-loading and unloading of bulky materials such as logs, scrap, or ...

Galvanized steel; top profile 50x30x2, bottom profile 50x30x2, cross braces fi 12, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461 Auction-ID: A1-45756-12

New Steel construction 16 m x 25 m Galvanised steel Side column 7 m high The structure is made of IPE 220 Frame spacing every 5 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Auction-ID: A1-45756-40

Siemens SINAMICS G150SC industrial frequency inverter in cabinet, high performance, ideal for demanding industrial applications (pumps, fans, conveyors, production machines). ✔️ Key features: Brand: Siemens Series: SINAMICS G150 Model: G150SC (Single Circuit) Power: 250 kW Voltage: 400 V Type: In-cabinet frequency inverter Year: 2024 Condition: New / never put into service ✔️ Configuration / options: Single Circuit Options: D14, D58, L00, L08, M06, M90, T58 Designed for heavy industrial applications ✔️ Advantages: High reliability Siemens Energy optimization Precise motor control Suitable for many industrial sectors Auction-ID: A3-43519-38048

Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 470 x 245 mm; Approx. Weight: 74kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-334

Siemens SINAMICS G150SC industrial frequency inverter in cabinet, designed for demanding industrial applications (pumps, fans, conveyors, production machines). ✔️ Key features: Brand: Siemens Series: SINAMICS G150 Model: G150SC (Single Circuit) Power: 160 kW Voltage: 400 V Type: In-cabinet frequency inverter Year: 2024 Condition: New / never put into service ✔️ Configuration / options: Single Circuit Options: D14, D58, L00, L08, M06, M90, T58 Suitable for heavy industrial applications ✔️ Advantages: Siemens reliability Energy optimization Precise motor control Wide industrial compatibility Auction-ID: A3-43519-38050

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilation and light: The upper slats are adjustable, allowing precise c ...

3 UNITS/SETS OF ATT0037 PACKED TOGETHER. A SINGLE ATT0037 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 550 x 350 x 110 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0037 PACKED TOGETHER: 550 x 1050 x h110 mm - 210 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-115

Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 470 x 245 mm; Approx. Weight: 74kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-265

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-85

Operating voltage: 240 V Frequency: 50/60 Hz Connection: 400 W Band width: 380 mm Band length: 1500 mm Auction-ID: A7-46287-118

Siemens SINAMICS G150SC industrial frequency inverter in cabinet, designed for demanding industrial applications (pumps, fans, conveyors, production machines). ✔️ Key features: Brand: Siemens Series: SINAMICS G150 Model: G150SC (Single Circuit) Power: 160 kW Voltage: 400 V Type: In-cabinet frequency inverter Year: 2024 Condition: New / never put into service ✔️ Configuration / options: Single Circuit Options: D14, D58, L00, L08, M06, M90, T58 Suitable for heavy industrial applications ✔️ Advantages: Siemens reliability Energy optimization Precise motor control Wide industrial compatibility Auction-ID: A3-43519-38049

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-154

Working width 4000mm - Cutting widths adjustable - For questions about the machine send your email to info@troostwijkvavato.com Auction-ID: A3-43519-16519

Siemens SINAMICS G150SC industrial frequency inverter in cabinet, designed for demanding industrial applications (pumps, fans, conveyors, production machines). ✔️ Key features: Brand: Siemens Series: SINAMICS G150 Model: G150SC (Single Circuit) Power: 200 kW Voltage: 400 V Type: In-cabinet frequency inverter Year: 2024 Condition: New / never put into service ✔️ Configuration / options: Single Circuit Options: D14, D58, L00, L08, M06, M90, T58 Suitable for heavy industrial applications ✔️ Advantages: Siemens reliability Energy optimization Precise motor control Wide industrial compatibility Auction-ID: A3-43519-38051

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 550 x 350 x 110 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-344

Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 470 x 245 mm; Approx. Weight: 74kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-208

3 UNITS/SETS OF ATT0039 PACKED TOGETHER. A SINGLE ATT0039 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0039 PACKED TOGETHER: 650 x 1350 x h185 mm - 348 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-129

Siemens SINAMICS G150SC industrial frequency inverter in cabinet, designed for demanding industrial applications (pumps, fans, conveyors, production machines). ✔️ Key features: Brand: Siemens Series: SINAMICS G150 Model: G150SC (Single Circuit) Power: 315 kW Voltage: 400 V Type: In-cabinet frequency inverter Year: 2024 Condition: New / never put into service ✔️ Configuration / options: Single Circuit Options: D14, D58, L00, L08, M06, M90, T58 Suitable for heavy industrial applications ✔️ Advantages: Siemens reliability Energy optimization Precise motor control Wide industrial compatibility Auction-ID: A3-43519-38052

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution, this model offers electric shades controlled by remote control. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilat ...

Has only been in operation for a total of 6 months, 3 seasons of 2 months each. Machine 1 : INCUBATOR SC-384-S FOREBROTHER The EMKA INCUBATORS® SC-384-S forebrother has a capacity of 38400 chicken eggs. This digital simplified model is with PID controller temperature & humidity). Water & air cooling standard, fiberglass reinforced polyester (PE) walls, pneumatic barrier, nozzle humidification, 8 pre-brood carts 100% anti-corrosion galvanized, 256 polypropylene (PP) pre-brood trays, CE compliant. The model offered is equipped with drawers for pheasants of 108 eggs, 64 drawers per pre-incubation cart, 6,912 eggs per cart. Total capacity of the ante-hatcher of 55,296 pheasant eggs. Machine 2 : SC-96-H TIPPING BOX The EMKA INCUBATORS® SC-96-H exit box has a capacity of 9,600 chicken eggs. This digital model is with PID controller (temperature & humidity). Water & air co ...

Ery Food Machinery grinder, model: WR 130, 400 V, 50 Hz, 7.5 kW, weight: 380 kg, plate diameter: 130 mm, total dimensions: 1150 mm x 720 mm x 1360 mm. Including extra plates.

Hitec BV pasteurizer, type: Steamer 450/4000E, serial number: 20212536, year of construction: 2021, 74 kW, s/s mesh belt, belt width: 440 mm, with switch cabinet, dimensions: 1400 mm x 800 mm x 400 mm, total dimensions: 5300 mm x 1100 mm x 1400 mm.

9400 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, DVI, SDI, DIGITAL LINK; electrical connection: 100-240 V - 50/60 Hz; Color: Black Auction-ID: A7-46311-10

Equipped with: Steel staircase with grid steps, system profiles perforated, original calculations available, 36 meters of handrail (steel) present, column pressure on concrete floor max 11180 kg! Complete with mounting material! Auction-ID: A1-41994-23

84 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 62.1 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40136-364

Equipped with a recent inspection (valid until 2027); manual pushing; Good working Auction-ID: A1-40106-115

Equipped with: 2 floors each 3400mm high above each other. 2 Stairs of steel with grid steps, system profiles perforated, original calculations available, 72 meters of handrail (steel) present, column pressure on concrete floor max 23000 kg! Complete with mounting material! Auction-ID: A1-41994-21