400 cw used for sale

turning diameter: max. 3.800 mm diameter of spindle flange: 1.900 mm max. swing diameter: 3.800 mm control: 840 D sl Siemens Main spindle:: turning speed range - main spindle: max. 100 min/-1 power capacity - main spindel: 200 kW max. Torque: 67.000 Nm gear box: 1:30 max. load: - kg C-Axis: Tool Mount:: Rechts / Right tool taper: Capto C8 swivellable: B: 0 - 270 ° Spindle speed - driven tool pos.: max. 6.000 min -1 max. Torque: 120 Nm Tool Mount:: Links / Left tool taper: Capto C8 tool magazin:: Rechts / Right number of toolpositions: 41 pos. max. tool weight: 20 kg max. tool length: 400 mm max. tool diameter: 120 mm 0: 125 mm tool taper: Capto C8 tool magazin:: Links / Left number of toolpositions: 25 pos. workpiece diameter at full load: 150 mm max. tool weight: 20 kg max. tool length: 400 mm axis stroke:: x-axis: 1: 2.800 mm x-axis: 2: 3.200 mm z-axis: 1.000 mm feeds:: rapid trav ...

Silo system for granules or pellets up to 1000 kg/m3 Loading by bucket elevator Distribution with conveyor corners Discharge organs oscillomats Truck can be driven under Plant was only in operation for a short time

CNC vertical milling machine Type: FBE-4000 Producer: Eumach Year: 2013 Control: Fanuc Series 31i-MB X: 4000 mm Y: 1000 mm Z: 1500 mm Tool magazine: 24 positions Spindle cone: ISO 50 Work area: 1050 x 4100 mm Max table load: 9000 kg Power on spindle: 22/26 KW Spindle speed: 5000 rpm Manual rotating head, speed 3500 rpm Cooling through the center of the spindle Folding the tool tray outside the table area - next to the stand on the left Chip conveyor Work probe OMP-60 Tool probe TS-27 R Machine Weight: 22500 kg Machine in good condition, fully functional Find more here - / Contact us at -

material width: 0400 mm coil weight: 1,50 t material thickness: mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm range of expansion ca.: 460 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4000 mm plate thickness: 30 / 35 mm pre-bending: 30 mm diameter of upper rolls: 570 mm side roll diameter: 450 mm diameter of lower rolls: 540 mm bending speed: 4 m/min min. bending diameter: 650 mm total power requirement: 60 kW weight of the machine ca.: 52 to dimensions of the machine ca.: - m The machine was overhauled in 2022 Equipment: - Hydraulic 4-roller round bending machine - Roll material: 61 MnCrMo 43 - Driven rolls: 2 Top-and bottom roll -- Drive: over 2 hydro motors direct flanged -- Adjustment speed bottom roll: 0-200 mm/min -- Adjustment speed side rolls: 0-700 mm/min - Speed compensation between top-and bottom roll: automatic - Operation of the tilting bearing: hydraulic - Tilting of the top roll: hydraulic - Bearing block: hydraulic - Indicator device of roll position: digital The data for this ad was created with ModulMWS - the software solution of Logo ...

Inv. Num. : 8985 Type: FL 400 3D Producer: Bystronic Created: 2020 Parameters: Operating hours: 11000 h Maximum cutting diameter: 406 mm Input/output length: 12000 mm

(2013) 400t Müller Knuckle-Joint Press Precision Knuckle-Joint Press for High-Speed Forming This year-2013 Müller press provides a 4,000 kN pressing capacity and a high-efficiency 55 strokes per minute cycle rate. Engineered for modern industrial precision, it features safety response times suitable for high-volume production environments. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Müller Model Type: KNP 400 Machine Number: 2703 Year of Manufacture: 2013 Nominal Force: 400t Work Capacity: 13 kJ Ram Stroke: 70 mm Ram Adjustment: 45 mm Stroke Rate: 55 strokes/min Shut Height (Table to Ram): 380 mm (Stroke down, adjustment up) Ram Surface Area (W x D): 500 mm x 400 mm Table Surface Area (W x D): 500 mm x 500 mm Motor Output: 15 kW Operating Voltage: 400 V Safety Distance: 190 mm Limit Value (Stopping Time): 95 ms Total Weight: 1 ...

A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible.

A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.

This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm.

saw blade diameter: 400 mm capacity 90 degrees: round: 135 mm capacity 90 degrees: square: 130 mm : 200 x 80 mm saw blade turning speeds: 12 / 25 m/min total power requirement: kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,2 x 0,9 x 1,8 m Cold circular saw - Semi-automatic - Hydraulic clamping - Coolant system - Protective cover - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 480 mm turning length: 800 mm control: System TX8F turning diameter over slide: 240 mm spindle passage: 65 mm chuck diameter: 200 mm turning speeds: 4000 U/min power capacity: 30 kW total power requirement: kW weight of the machine ca.: 4,3 t dimensions of the machine ca.: m powered tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, produc ...

laminating machine Foliant 400S 38x58 cm

plate width: 5000 mm plate depth: 2000 mm plate height: 400 mm total power requirement: kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.

Aircooled chiller TECHNOTRANS OMEGA K 400L 55 KW Cooling capacity: 55 kW / 15.64 tons (13/18 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos MG100LC-F-H3-CML3A, buffer tank. Dimensions: 1.67x0.86x1.8 m. Weight: 700 kg. Condition: Good

A complete cut-off grinding system is available. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking device. 4) Bar rotating drive and measuring station. 5) Weighing station with section sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic power unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible.

Cutting area round/square: 190/190 x 190 mm Cutting area in mitre 45° round/rectangle: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 Lifting speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Space requirement: 1200 x 600 x 980 mm

Kodak Magnus 400 F with stacker, using Kodak Sonora XTRA 3 process free plates, under power in print shop. Available immediately.

x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...

x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...

Gear grinding machine HURTH SRS 400

Key data: 400 KW, 500 kVA, 230 V

New CUMMINS gas generator. 400 kW in a soundproof container. Price is for the generator in the container. (Can be equipped with heat exchanger equipment) K19N-G4 engine; Leroy Somer TAL-A473 generator Voltage 230/400 Volts

Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3

grinding diameter: 850 mm grinding length: 4.000 mm centre height: 525 mm workpiece weight max. betw. centres with steady: 5.000 kg control: SINUMERIK 840 D Feeds & travels: - feed Z-axis: 0,01 – 6.000 mm/min feed X-axis: 0,01 – 6.000 mm/min Travel Z-axis (table): 4.500 mm Travel X-axis (grinding spindle): 650 mm Grinding wheel: - Max. Dimension: Ø1.060x60x304,8 mm grinding wheel speeds: 1.100 min-1 peripheral speed: 45 m/sec power: 22 kW tail stock: - Taper: MK 6 quill travel: 100 mm diameter of quill: 115 mm Workpiece spindle: - Taper: MK 6 Speed range workpiece: 10 - 120 min-1 torque of the drives: 41,5 NM control: total power requirement: 52 kW weight of the machine ca.: 25,5 t Equipment & Accessories CNC cylindrical grinding machine in most robust design for heavy workpieces • Scope of geometric retrofit: • Slideways of X- and Z-axis regrinded, intermediate table and top ...

Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned

spindle passage: 80 mm max. turning diameter: 395 mm Max. Turning length: 750 mm control: System TX 8H max. Spindle speed: 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned

Model: PLT-400 Year: 2022 Condition: Used Serial Number: 10492297 Stock Number: 3190J Belt width: 400 mm Product thickness 3 - 51 mm Belt speed: 0.36 - 24 m/min Compressed air: 0.7 l/min Power: 3 x 400V, 50Hz, 3kW Dimensions: 3300 x 1100 x 1500 mm Weight: 650 kg With extra long infeed conveyor of 1600 mm

For sale is a production cell consisting of: 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC R-2000-165 Robot Year of construction 10-2020 Commissioning 2021 MAZAK VARIAXIS i-800 5-axis machining center Smooth X control Pallet changer, 2 pallets 5-axis simultaneous machining Travels: X-axis: 730 mm Y-axis: 800 mm Z-axis: 560 mm A-axis: -120° to +30° C-axis: +-360° Max. spindle speed 10,000 rpm SK-50 mount, -Tool magazine for 120 tools -Preparation for hydraulic clamping incl. clamping function pallet -Automatic pallet changer -Electronic handwheel -Knoll coolant system KF400/2300 -Paper belt filter -High pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 Laser -Air blowing on the NC4 laser -Mazak Monitoring B, incl. Renishaw RMP600 button - Tool Breakage Monitoring (TBR) & Mazak Monitoring System (MMS) EIA/ISO  ...

Model: BR1800/400 Year: 1994 Condition: Used Serial Number: 2403199 Stock Number: 3000 Belt width: 400 mm Description: Hold down belt, circulation pump, oil level control, prepared for CO2 fire extinguisher Frying length 1800 mm Heating electric, 36kW Power: 3 x 400V, 50Hz, 38kW Dimensions:4300 x 1400 x 1450 mm

Labeler Manufacturer: HERMA Type H 400 8 L S/N 21127178

Manufacturer: Harald Baumgarten/Sema Systemtechnik Model: TM 400S Year of Manufacture: 2014/2015 Type of Machine : Angle Grinding System The system consists of the following components: - Cut-off grinding machine type TM 400 S with bundle loader (manufacturer Sema Systemtechnik, - rod breaking device, - Rod rotary drive / measuring station - Weighing station with section sorting, - Extraction and filtration system, - Soundproof booth (manufacturer: HüWa Schallschutz und Anlagenbau) and protective fencing - Four-column press (Manufacturer: Winter Presses) - Hydraulic power unit with hydraulic pumps - Control cabinet and control panel Find more here - / Contact us at -

grinding diameter: 850 mm grinding length: 4000 mm centre height: 425 mm control: Siemens 8 max. workpiece weight between centres: 3000 kg workpiece weight in steadies max.: 4000 kg max. workpiece weight -without tailstock: 300 kg vertical Stroke: 0 - 90 °/deg. work piece spindle speed: 23 - 230 U/min workpiece-spindlehead motor: 5,3 kW grinding spindle head - swivable: +30 / -10 °/deg. dimensions of grinding wheel: 750 x 125 x 305 mm table feed: 0,01 - 4000 mm/min rapid traverse of table: 10 m/min table swivelabel +/-: +3 / -3 °/deg. grinding wheel speed: 25 - 50 m/sec grinding motor: 19 kW dimensions: 14,0 x 3,13 x 2,6 m total power requirement: kW weight of the machine ca.: 19,4 t dimensions of the machine ca.: m Universal external cylindrical grinding machine, modernised in 2011 Siemens 828D control system Internal grinding head, swivelling MPM grinding wheel balancing machine  ...

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

Edhard Dosing Machine PV-4001Dosing Machine PV-4001Power: Â Â 186 WattConnected Values: 240 V, 50/60 HzDetails see pictures

König Mini Rex 4000 Roll Plant  Product descriptionManufacturer: KönigModel: Mini RexType: 4000 TR/G-S SKG58+RK58Year of construction: 2007Roll plantModel: G 2000Type: SA2König G2000 Compact plant for round-knitted, stamped, oval or folded-long-rolled. The compact proofer with an hourly output of approx. 2,500 pieces is the ideal solution for micro and small businesses or in-store bakeriesCompact pre-proofer system with Mini Rex Futura head machinemax. Hourly output in proofer operation: 2,000-2,500 pieces, infinitely adjustable for higher output

Sourdough plant with cooling ThörmerManufacturer : ThörmerType: TSHKWA 4001With built-in own aggregate Condition: Not tested must be checked completelyDetails see pictures.Payment: Bank transfer or cash payment

Bread slicer Wabäma Manufacturer : Wabäma Model : 980.400.230.62.20 Circular knife 400 volts,50 Hz very robust machine fully functional Cutting thickness adjustable details see picture

Circular knife Bread slicer Treif Diskus  Product description Manufacturer: Treif Maschinenbau GmbH Model: Diskus 400 Material: stainless steel Condition: used, functional, bakery condition - please clean thoroughly before use Year of construction: 2010 Cutting width adjustable With circular knife / round knife Mobile, on castors  Details see pictures

Shovel Aluminium ALU Weigh scoop Flour scoop 400 mm( 2 pieces )Aluminium die-cast polishedTotal length approx. 400 mm1500mlWeight approx. 486 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Duplo System 4000 - 2xcollator with 10bins DC-10/60 - stitching and folding unit DBM 400 - Trimmer DBM 400T - short conveyor DBM ? 2xDC-10 collator, System 4000 - number of bins: 10 - paper size: min. 120x148mm, max. 350x500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-400 stitching and folding - paper size: min. 120x170mm, max. 350x500mm - process speed: up to 4200pcs/h - dimensions: 1448 x 686mm x 914mm - ratings: 120V 60Hz 8A - weight: 290kg DBM-400T Trimmer - booklet size: min. 85x120mm, max. 250x356mm - trimmed booklet size: min. 75x120mm - speed: ut to 4200 sets per hour - power consumption: 120V 60Hz 8.5A - dimensions: 1244mm x 700mm x 1067mm - weight: 200kg

Model: BR2000/400 Condition: Used Serial Number: 576 Stock Number: 2811B Belt width: 400 mm Teflon infeed, hold down belt, circulation pump, sediment removal, manual hoists, prepared for CO2 fire extinguisher With separate infeed conveyor Frying length 2000 mm Frying time: 25 - 250 sec Heating: electric Power: 3 x 380V, 50Hz, 45kW Dimensions: 5100 x 1200 x 2800 mm Weight: 1150 kg

x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm Number of working hours: 55.000 h tool taper: HSK 63 turning spindle: 85 spindle turning speed range: 20.000 U/min Chain-type tool magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

2 units semi-hermetic reciprocating compressors by DWM Copeland, model D6SJ1-400X-AWM/D. Technical data: 6-cylinder reciprocating compressor Displacement: approx. 127 m³/h Speed: 1450 rpm at 50 Hz Voltage: 380–420 V (50 Hz) / 440–480 V (60 Hz) Protection class: IP54 Max. operating pressure: 28 / 22.5 bar (H/L) Year of manufacture: 02/2003 Manufacturer: Copeland (Made in Belgium) Condition: Used, removed from system. Signs of storage and use present. Functional test not performed. Sale in current condition, without warranty or guarantee.

An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible.

General SKU278N326 LocationBarneveld MakeLAUDA TypeSUK 400 W-EX Main Features Heating (medium)Electric Capacity27 KW Temp.20 °C Specified Features - Temperature control unit Temperating machineProcesscoolingsystem Heating medium:Downtherm J With coolingCoolingmedium R404 A Temperature-40 /20 gr.C. With pumpcheck Motor37 KW, 400 Volt (Ex) With temperature controllercheck Information Mach.No.HKS08013 Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace1,3x1,9 M Total height2 M Weight2300 KG ATEX compatiblecheck Technical specs Extra informationheatingsystem 8 bar, coolingsystem 28 barTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are we ...