400 cw used for sale

This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information.

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine.

Key data: 250 t, 4100 mm

6 Axis Byvision / Laser Guards

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

Key data: 4000 kN

Krauss Maffei KM 400-3000 GX Blue Power with the Krauss Maffei LRX 250 robot Year of manufacture: 2018 Injection unit: Screw diameter: 80 mm Injection weight: 1464 g Spray pressure: 1855 bar Dosing volume: 1608 ccm Clamping unit: Clamping force: 400 t Handlebar spacing: 920x830 mm Size of the clamping plates: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. tool installation height: 400/900 mm Air Valve x 4 Hydraulic core pull x 4 Control with hot runners x 36 Self-closing nozzle x 10 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Function for automatic pulling out of the upper spar Machine has been regularly serviced by the authorized s ...

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This Impulse IP-175 piston pump is designed for vertical and horizontal drainage. These positive displacement pumps are self-priming and ideal for pumping unlimited quantities of a mixture of water and air. Whats more, this pump can run dry without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , Throughput capacity: 90 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, , = More information =, , Year of manufacture: 2026, Applicable material: Water, Empty weight: 1.220 kg, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-31 ...

This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine.

General SKU227T233 MakeUVA Packaging TypeNEWTON 400 I No.2003517 Year of construction2003 Mounted in framecheck Main Features MaterialStainless steel Specified Features - Powder filler Bag fillercheck Pneumatic fillingcheck Dosingmax. 3 kg Capacitymax. 120 bags/min. With motorcheck Information LocationBarneveld With switchgearcheck Floorspace2,2x1 m Total height2,6 m Weight950 kg CEcheck Extra SpecificationsTechnology Intermittent Motion Bag width 100-400 mm Bag width, block bottom 60-270 mm Front to back, block bottom 50-140 mm Bag length 600 mm Power consumption 10/12,5 kVA Air requirements 6 bar Maximum film roll width 840 mm (XL 1040) Maximum film reel diameter 700 mm Core diameter 76 mm or 156 mm Maximum machine output 120 bags/min. Machine weight approximately 950 kg Powder fillersPBB-UVAPackaging machines > Powder fillersBrand > PBB-UVA What you can expect f ...

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe

This 5-axis ONA AE 400 wire EDM machine was manufactured in 2005. It features a maximum workpiece dimension of 800 x 500 x 250 mm and can handle a maximum workpiece weight of 500 kg. The machine also includes a dielectric tank capacity of 600 liters. If you are looking to get high-quality wire EDM capabilities, consider the ONA AE 400 machine we have for sale. Contact us for further details.

General SKUR1210 MakeEstrellla AG (CH) No.84166 Year of construction1985 Mounted on legscheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume4000 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Capacity4370 Ltr (nett.4000 Ltr) Vessel sizesdia.1000mm x2000mm Dished topcheck Dished bottomcheck ManholeDN500 Top connections2x DN200, 4x DN80 OutletDN80 Max. temperature100 degr.C. With propellor stirrercheck Motor1.3 KW, 380 Volt (EX) Speed mixing shaft915 rpm Pressure vessels Closed vertical tankcheck Capacity4370 Ltr Dished topcheck Dished bottomcheck Max. temperature100 degr.C. With propellor stirrercheck Motorcheck Information LocationBarneveld ATEX compatiblecheckPressure vesselsEstrellaTanks > Pressure vesselsBrand > Estrella What you can expect from Foeth: -- Machi ...

Manufacturer: Hugo Beck Model: Super 400 K5 Year of Manufacture: 2010 Machine Type : Horizontal Flow Wrapping Machine Used horizontal flow wrapping machine in good condition. Suitable for wrapping a wide range of products in polyolefin, PE, or PP film. - Product dimensions: up to 480 mm wide, 150 mm high, from 40 mm in length. - Output: up to 5,000 cycles per hour. - Working height: 820 to 900 mm - Machine weight: approx. 2,100 kg. - Film roll: max. diameter 400 mm, max. width 600 mm. - Power: approx. 12 kW - Supply voltage: 3 x 400/230 V, 50 Hz. Equipment included: film folding device FF700-IN, print mark control, seal welding with euro slot, longitudinal weld overlap 10 to 30 mm, press belt, pneumatically controlled press roller. Full documentation available: operator manual, electrical diagrams, spare parts lists, maintenance schedule, machine drawings, and third-party componen ...

Key data: 400 kN

Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of Make: 2012 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tibar-less Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Original Arburg tool crane Dimensions: Weight: 6500 kg Length/Width/Height: 1.9 ...

Key data: 400 kN

Arburg 270C 400-70 Year of Make: 2007 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our compa ...

Arburg 270C 400-70 e² with the Arburg Multilift robot / hybrid machine Year of Make: 2016 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Self-closing nozzle Arburg Multilift Select 6kg transverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis B and C Traversing in ax ...

Arburg 470S 1100-400 with the Wittmann W711 robot Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners x 8 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Conveyor belt integrated with the machine control system Built-in sorting flap It is possible to change the screw diameter Robot Wittmann W711 Year of Make: 2008 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-2000 To ...

Key data: 1000 kN

Arburg 470H 1000-400 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of Make: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 100 t Spar spacing: 470x470 mm Size of the clamping plates: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubricat ...

Arburg 470C 1500-400 with the Wittmann W721 robot Year of manufacture: 12.2006 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of Make: 2006 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4 ...

Arburg 470C 1500-400 with the Wittmann W711 robot Year of Make: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Robot Wittmann W711 Year of Make: 2007 4-axis robot: 3 axes are driven by servo motors (electric); Axis C Traversing in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps ...

Key data: 1500 kN

Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed clamping plate Air valve x 3 on the side of the movable clamping plate Hydraulic core pull x 1 on the side of the fixed clamping plate Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitroge ...

Key data: 1500 kN

Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubrication Parallel movements Priamus Sensor - Tool Pressure Control Dimension ...

Used Used labeller Sacmi Opera 400 OPP Roll-fed: Year: 2003 Condition: Good Used labeller Sacmi Opera 400 OPP Roll-Fed Year: 2006 Speed: 50.000 Bph Direction: Counterclockwise Model: Line Lc Number of heads: 32 Bottle formats: 0.5L PET Dimension minimum and maximum for the bottles: ? 42-70 mm Height 150-370 mm Dimension minimum and maximum for labels: lenght 138-234 mm Height 30-175 mm Safety protections Code: EA 575 More details: https://bottlingscout.com

Hydraulic cylinder with 4 guide columns, BSE 250.40/25.01.4.201.400, Merkle, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, Technical information: - Double-acting hydraulic cylinder with 4 guide columns - Merkle BSE 250.40/25.01.4.201.400, - Piston diameter 40mm, piston rod diameter 25mm - Max. stroke 400mm, max. 250bar 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. O ...

Key data: 1600 kN

Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/hp Built-in Arburg c ...

Arburg 820S 4000-2100/400 / Production line with the Sepro Industrial Robot SR S5-35 S3 Trans robot / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Spray pressure: 2500 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced Injection Units – Bimetal Proportional valve on vertical injection unit – precise injection ...

Key data: 850 mm, 700 mm, 500 mm

Inv. Num. : 8976 Type: C 400 U Producer: Hermle Created: 2015 Parameters: Control system: Heidenhain iTNC 530 Number of stacking positions: 38 Number of axles: 5 pieces X-axis travel: 850 mm Y-axis travel: 700 mm Travel Z axis: 500 mm Cone: SK40 Electric spindle speed: 18000 1/min Spindle cooling: 40 bar Rotary table Ø 650 mm A 91° / -139° C 360° BLUM Tool Measuring System BLUM workpiece probes Direct torque drives in rotary axes Chip conveyor Oil mist extraction Electronic handwheel

Moravek CW Carbonator & Bottle Filler. Twin-head machine. Various Prices as we currently have a few in stock. - Please Enquire Product is carbonated immediately product prior to filling. Range of bottle sizes from 0.2 litres to 2 litres capacity. Filling of glass bottles and P.E.T. bottles. Filling still or carbonated product. Suitable for a wide range of beverages including beer, wine, soft drinks, mineral water, cider and champagne. Simple to operate and flexible. Capable of carbonating at ambient temperature. Available with additional chilling, if required. Compact. Occupies minimal floor space. Integral product pump. Simple to change bottles sizes. All stainless steel construction. This is a second hand machine offered in good condition. For more information and more available stock please visit us at - advancedbrewing.co.uk

This 5-axis MORI SEIKI ZV 400 SUPER MILLER was manufactured in 2005. It features an X-axis travel of 600 mm, Y-axis travel of 425 mm, and Z-axis travel of 450 mm. The machine includes a table diameter of Ø 350 mm and a maximum workpiece weight of 200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI ZV 400 SUPER MILLER vertical machining centre we have for sale. Contact us for further details.

Key data: 4100 mm, 6 mm

Capacity: 4000 x 6 mm. Stroke 120 mm. DURMA DT-7 Control. Serial No. 608922260. Dimensions: 5230 x 3600 mm. Height 2150 mm. Weight 11460 Kg

This 3-axis Werth Scope-Check 400 was manufactured in 2013. It features a measuring range of 400 mm in the X and Y axes, and 300 mm in the Z axis. The machine is equipped with a tactile probe system and operates on Windows 7 Professional. If you are looking to get high-quality measurement capabilities, consider the Werth Scope-Check 400 CMM machine we have for sale. Contact us for further details.

The machine is in very good technical condition, testing is possible by prior arrangement.

Key data: 1020 mm

Hand-held guillotine shears with adjustable stop (70 - 500 mm), scissors stand on a steel frame, Machine is sold in existing condition, without functional control, i.e. the machine will not be overtaken by us Working length: 1020 mm Sheet thickness steel: 0.75 mm Sheet thickness aluminium: 1.50 mm Colour: grey Machine weight: 150 kg Dimensions: 1700 x 550 x 1400 mm Hold-down manual

Cylindrical, Vertical stainless steel tank 25BBL Working capacity Supplied By East field Process Diameter Approx 2400mm Overall height Approx 2850mm Top entry man way door External cooling Jackets on tank shell Insulated with stainless steel cladding over Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU050C487 MakeWalter Stöcklin AG Dornach No.251397 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity400 l Sizes1150 x 770 x 200 mm Conical bottom± 600 mm Flat topcheck With covercheck Manholecheck dia. 400 mm Outletcheckdia. 250 mm Information Mounted on wheelscheck Floorspace1,4 x 0,9 m Total height1,3m Weight450 kgSilosStoecklinTanks > SilosBrand > Stoecklin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

General SKU050C489 MakeWalter Stöcklin AG Dornach No.263249 Year of construction1982 Mounted on legsMounted on wheels Main Features MaterialStainless steel Volume400 Ltr. Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silos Closed vertical tank(1x) Capacity400 Ltr Vessel sizes1150x770x200mm Conical bottom± 600mm Manholedia. 400mm Outletdia. 250mm Silocheck Closedcheck Capacity400 l Sizes1150 x 770 x 200 mm Conical bottom± 600mm Flat topcheck With covercheck Manholecheck dia. 400 mm Outletcheckdia. 250 mm Information LocationBarneveld Floorspace1,4x0,9 M Total height1,3 M Weight450 KGSilosStoecklinTanks > SilosBrand > Stoecklin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...

General SKU050C491 MakeANAG Dudingen No.004 Year of construction1997 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Capacity400 l Sizes1150 x 770 x 200 mm Conical bottom± 600 mm Flat topcheck With covercheck Manholecheck dia. 400 mm Outletcheckdia. 250 mm Information Mounted on wheelscheck Floorspace1,4 x 0,9 m Total height1,3 m Weight450 kgSilosAnag DudingenTanks > SilosBrand > Anag Dudingen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible.

A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible.

The BA150E is a 6-inch mobile wastewater pump suitable for pumping contaminated water with particles up to 80 mm in diameter., This centrifugal pump is equipped with its own vacuum system and is therefore dry self-priming., Mounted on a fully hot-dip galvanized, stackable frame., , Drive: Electric motor, Discharge x suction: 6 x 6, Max. capacity: 430 m³/h, Max. delivery head: 24 mwc, Free passage: 80 mm, Vacuum system: MP50 (50 m³/h), Version: Dry self-priming, Motor: 22 kW, Poles: 4, Frequency: 50 Hz, Starting method: Soft starter, Voltage: 400/690V, , Do you have any questions? Please contact us for a personal consultation., , Throughput capacity: 400 m3/h, Max dirt passage: 80 mm, Motor brand: Hansa-Motoren, Max. head: 24 MWK, Weight: 1250 kg, , = More information =, , Year of manufacture: 2014, Applicable material: Water, Empty weight: 950 kg, Connector size: 6 Inch, Cargo space ca ...

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool turret 12 times: C4 Capto total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.  ...

turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm travel -x axis: 280 mm feed x-axis: 0,1 - 30.000 mm/min rapid traverse X-axis: 30 m/min travel -z axis: 1.150 mm Feed z- axis: 0,1 - 60.000 mm / min. rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5.000 U/min tool turret - number of stations: 12 tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The dat ...

turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The data ...

serial number: 1106479 : 400 miter: ja cooling: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 4000 mm width: 1800 mm height: 1800 mm : 5000 x-travel: 600 mm tail stock: ja tool adaptor: VDI 30 weight of the machine ca.: 5,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.