400 cw used for sale

Clamping plate, welding table, welding table, straightening plate -Width: 1210 mm -Length: 4000 mm -Height: 830 mm -Sheet thickness: 30 mm -with steel frame -Number: 2x plates available -Price: per piece -Weight: 1400 kg/piece

Sell a draft fan R 400 / 51-895 with a Siemens motor 1CV3182A

x-travel: 400 mm y-travel: 450 mm z-travel: 35 mm Control: Heidenhein TNC 530 table weight: 200 Kg : Random 36 fach tool adaptor: HSK E40 turning speeds: 30.000 U/min total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg

Feed technology, feed device, storage container with automatic feed, spiral conveyor, feeder-bowl -Automatic feeder without: storage container -Connection: 230 volts -Dimensions: 310/310/H260 mm -Weight: 31 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -Load capacity: kg -Tire size: 400 x 145 mm -Holding bore: 60 mm -Number: 3x wheels available -Price: per piece -Weight: 60 kg/piece

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Pneumatic cylinder, air cylinder, pneumatic ram, air ram, rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Stroke: 83 mm -Piston diameter: mm -Piston rod: 30 mm (connection thread) -Total length: mm -Total length extended: mm -Dimensions: 530/380/H380 mm -Weight: 26 kg

Brand Allibert Year of manufacture: Used Dimensions LxWxH (mm) Outside: 400 x 300 x 350 (320) / Inside: 350 x 250 x 310 Weight (Kg) ca 1,70 each Number of pieces in stock 1232 Made in Belgium Comments PP PVC box incl. covers ( small amount little damages)

Brand Eurotec Dimensions LxWxH (mm) Outside: 600 x 400 x 120 / Inside: 570 x 370 x 100 Weight (Kg) ca 1,86 each Number of pieces in stock 5202 Made in Germany Comments Used but good condition, ex-freeze usage

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outer: Ø 403 mm -Width: 15 mm -Price: per piece -Number: 1x available -Weight: 3.6 kg

Grinding wheel, cup wheel, double grinding stand, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outside: Ø 400 mm -Width: 10mm -Price per piece -Quantity: 1x piece available -Weight: 2kg

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: Ø 400 mm -Width: 10 mm -Quantity: 1 available -Weight: 2.2 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Groove: mm -Height: 150 mm -Dimensions: 600/700/H150 mm -Weight: 147 kg

Used BOSCH GKF 400S capsule machine. New 1999. The device is technically efficient, very little used. Equipment dedicated to #0 capsules Areas of application of the GKF device: - Depending on the execution method, the GKF 400 capsule filling and closing device is used to fill capsules with powders, granules. - The machine is designed for a maximum throughput of 400 capsules per minute. The device was used in the GMP area. Made of stainless steel. Simple operation, very simple maintenance.

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg

Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg

Press 400x600 make ZDA Type 100660 manualy operated electrical heated plates Clamping force 1540 kN

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece -Dimensions: 440/440/H300 mm -Weight: 3 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 200 mm -Edge: 19 mm -Drainage: Ø 64 mm -Number: 7x available -Price: per piece -Dimensions: 440/440/H200 mm -Weight: 2 kg

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Kitzinger crate dishwasher / instantaneous dishwasher - Type: Contino 400NDB1 - Year of construction: 2007 - Bandwidth approx. 70cm - Height entrance: 53cm - Total length: 685cm

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Hand washbasin, washbasin, weld-in basin, swivel basin -Stainless steel sink -Internal dimensions: 400 x 400 mm - Depth: 300mm -Edge: 18mm -Number: 20x available -Price per piece -Dimensions: 440/440/H300 mm -Weight: 3.9kg

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C13TE2F Engine No.: 284948 Power: 377 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L 1 D - F 41 Gene. No.: N 22J425396 Generator power: 400 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 600 Dimensions of the power unit: Width approx. mm: 1.620 Height approx. mm: 2.295 L ...

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll height: 735 mm -Roll width: 400 mm -Dimensions: 420/430/H735 mm -Weight: 46 kg

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

NH fuse -NH 3 -400 A 500 V AC -Price: per package -Number: 5 pieces -Weight: 1.7 kg

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cycles/Hour, 6 Feeder Stations, 3x DVU 400 Vertical Feeder, 3x DHU 400 Feeders, 1x CHU 450 Cover Feeder, Stiching Unit ST 400 with 2 Stiching Heads, Three Knife Trimmer TR400 with Stacker Delivery

length: mm height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Pulse welder Hybrid 4002 Year of manufacture 2005 Feeding device / 4 rolls wire feed DV 39 machine no.: 940 16 222 - Welding hose 4000mm - Ground cable 70 square 5000mm - Intermediate hose package approx. 4000mm - Hose package Binzel MB511 Pulse current The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. flow rate: 5.0 m³/h -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg

Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Starkstrom Gummesbach, two-hand control panel -Dimensions: 400/400/H915 mm -Weight: 18 kg

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Conveyor belt: with conveyor ribs -Width: 400mm -Length: 7120mm -Transport dimension: 1200/400/H300 mm -Weight: 26 kg

Face plate, face plate chuck, four-jaw chuck, face lathe chuck -Face plate: chuck size Ø 400 mm -Cone: Ø 102 - 82 mm -Intake: thread M152 x 4.5 -Through hole: Ø 82 mm -Weight: 54 kg

Used greenhouse lighting, manufacturer: DH-Licht, model MGR-K 400-CHD, for sale by bid

current intensivity: 400 A weight of the machine ca.: 125 kg dimensions of the machine ca.: 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 IP protection class 23 Insulation class H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel, steady rest, lynette -Bezel: max. passage Ø 400 mm -Center height: 345 mm -technical drawing: with the photos -Total dimensions: 930/165/H890 mm -Weight: 98 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: steel -Number: 2x clamping cubes available -Price per piece -Dimensions: 620/400/H505 mm -Weight: 332 kg/pc.

Brush machine Wandres type Ingromat Cleaner CF04/400 Specifications: • Working width (mm): 400 • Brush: top and bottom • Spraying device