4 side used for sale

Bread slicer Treif Diskus 400 Year of Make: 2007 Cutting without oil One-button operating system Areas of application: Crafts, commercial kitchens, supermarkets, bakery branches Dimensions (LxWxH): 800x700x1100 mm Weight: 195 kg Max. insertion length: 400 mm Disc thickness 4-24 mm Max. insertion cross-section (WxH): 330x150 mm Max. 130 sections per min

pressure: 3,3 bei 6bar t dayligth: 250 mm stroke: 70 mm work stroke: 10 mm table surface area: 220x190 mm throat: 150 mm weight of the machine ca.: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dough dividing and rounding machine Lippelt SVI-4DA Year of manufacture: 2018 Dough funnel with pre-portioner approx. 130 kg Dough capacity Head machine 4-row Weighing pistons for small and large weights Weight range small: 50-80 g Weight range large: 70-115 g Touch control Siemens PLC With program memory Spreader belts with adjustable spreading width  Spreading belt flouring With lubrication for rose buns

Professional fully automatic packaging system from a renowned European manufacturer consisting of 3 components: feed belt, fully automatic angle welder and shrink tunnel. The machines can therefore be operated together or individually. Suitable for packaging food, technical articles, printing and paper products, household goods and toys as well as textiles, for example. Feed belt GH 1000 / 400: -Speed infinitely adjustable. -Automatic / manual operation selectable. -Length approx. 1 m. -Usable width approx. 400 mm. -Adjustable side guide. -Height adjustable via machine feet. Fully automatic angle welder FP 6000 CS -The angle welder has several monitoring sensors, light barriers or photocells to control the automatic process, as well as mechanically adjustable product chicanes. User-friendly control panel with extensive functions and setting options such as automatic and set- ...

Wrapping machine Fritsch CRH 120/400 Year of Make: 2015 Approx. 450 operating hours Condition: technically as good as new, visually few signs of wear 1-row operation 400 mm table width Output depending on the size of the piece, the number of windings and the feeding capacity: max. 5000 pieces/h Suitable for line combination

Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible.

2019 Hurco VMX 42i Vertical Milling Machine. Less than 100 hours on machine. Machine has been stored in heated building. Boasting a 24-inch Z-axis travel bed and a 42-inch X-axis travel bed, 24-inc Z verticle travel. Equipped with 12,000 RPM, CAT 40 spindle taper and a powerful 24 hp spindle horsepower. 30 station automatic tool changer. Wired for 220 V power source. Magnet shown in video not included in sale of machine. Renishaw tool and part probe.

Manufacturer: Bous Model: 4765/30 WT System Name: Trowamat Year of Manufacture: 2013 Usable Chamber Dimensions : 470 x 650 x 300 mm Maximum Load per Basket: 100 kg Maximum Workpiece Length: up to 550 mm Tank 1 pH Range: 7 to 11 Tank 1 Fill Volume: 500 L Tank 1 Temperature: 70 degrees C Tank 1 Heating Power: 18 kW Extraction: 0.18 kW / 108 mm diameter Drying Power: 11 kW Compressed Air: 6 bar Voltage / Frequency: 230/400 V / 50 Hz Control Voltage: 24 V DC Total Current Draw: 82 A at 400 V Special Equipment: Loading Station , Oil Separator Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Turbo Clean Type of Machine : Parts cleaning machine Model : T10-400 Year of manufacture: 2007 Machine Weight: 550 kg Maximum Fill Volume: 18 L Maximum Load Weight: 15 kg Installed Power: 7.0 kW Mains Voltage / Frequency: 3 x 400 V / 50 Hz Pneumatic Connection: 6 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 420 KW, 400 V

Kuntschar und Schlüter (Wolf) Gas CHP GTK 382K Gas electricity and heat generators from 2013, 64,000 operating hours, with control, cooling and two silencers. Engine in need of overhaul. 382 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 355MA4-B, 680 KVA Manufacturer: Kuntschar and Schlüter (Wolf) Model: GTK 382K Type: Gas CHP Serial Number: 0094 Power [KWel]: 382 Engine: MAN E2842LE322 Engine power [KW]: 420 Year of Make: 2010 Hours: 64,000 MarelliGenerators MJB 355MA4-B AC Generator Manufacturer: MarelliGenerators Model No.: MJB 355MA4-B Type: AC Synchronous Generator Serial Number: MJB3532L014M0 Power [KVA]: 680 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 981 Speed [1/min]: 1,500 Year of Make: 2013 Weight [kg]: 1.780

Offer 26148 Technical data: - Pressure capacity 420 KN / 42 t - Stroke length 0 - 300 mm - Lifting speed 0 - 0.6 m/min - Tool height 200 mm - Bending performance - with prism MW 125 flat approx. 200 x 16 mm - with prism MW 240 flat approx. 200 x 24 mm - Tube bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - For angle programming + length programming - Controlled length stop 3000 mm - Various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Teflon infeed, hold down belt, sediment removal, electric hoists, circulation pump, oil level indicator, CIP, Belt width: 630 mm, Frying length: 4000 mm, Heating: thermal oil, 232kW, Oil capacity: +/- 1100 litres, 20 mm above belt, Compressed air: 6 - 8 Bar, 0.5 Nm³/h, Power: 3 x 400V, 50Hz, 10.5kW, Dimensions: 6850 x 2100 x 2800 mm, Weight: 4200 kg

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 97 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c4-4-w23-46131 70-new/42380, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 615 kg, Type number: C4.4 W23-4613170

This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2010. It features an X-axis travel of 560 mm, Y-axis travel of 560 mm, and Z-axis travel of 630 mm. The machine has a spindle speed of 14,000 rpm and a tool magazine capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH 4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details.

Microwave tunnel conveyor dryer for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water cooling circuit included. Ventilation system to extract water vapor from the chamber not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electrical • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: PTFE food grade (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 150 ...

This 3-axis Okuma ACE CENTER MF-46VA was manufactured in 2006. It features an X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 15,000 rpm and an automatic tool changer with 32 stations. If you are looking to get high-quality machining capabilities, consider the Okuma ACE CENTER MF-46VA vertical machining centre we have for sale. Contact us for further details.

turning diameter over bed: 480 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: - mm turning speeds: 90 - 1120 U/min centre height: 240 mm spindle bore: 52 mm total power requirement: 7,5 KW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC milling machine Type: EMCOMAT FB-450 MC Manufacturer: EMCO Year: 2019 Control: Siemens Sinumerik 828D X: 450 mm Y: 350 mm Z: 400 mm Table size: 800 × 400 mm Maximum table load: 300 kg Spindle-table distance: 230 – 630 mm Rapid traverse X/Y/Z: 5000 mm/min Working feed: 10 – 2000 mm/min continuously Spindle speed: 10 – 5000 rpm Main motor power: 10 kW Tool clamping: SK40 Horizontal and vertical milling Vertical head tiltable by ±90° Dimensions: 1980 × 2030 × 1990 mm Machine weight: 2270 kg In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Screen PlateRite 4300E, Year 2008 only approx. 20K plates done RIP York Workflow Inlinepunch 425 Azura C95 Clean out unit Available: at short term

General SKU023C129 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure vapour evaporator6 Bar Main Features Surface12.5 m2 Specified Features - Falling film evaporator Falling film evaporator(1x) Heating surface12,5 m2 Tube capacity120 Ltr Number of tubes:34 Tube diameter40mm Tube length3000mm Shell capacity210 Ltr Max. temperature140 Degr. C. Capacityvessel 550 Ltr With jacket(coil), Capacity 10 Ltr MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Weight980Falling film evaporatorsFine chemicalsOther chemicalFeed additivesSolventsDiscountFood additivesLubricants & oleoAnimal feedBeveragesAPIOils & fatRutzColumns > Falling film evaporatorsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Food & Feed > Feed additivesIndustries > Chemical > SolventsDiscountIndustries > Food & Fee ...

Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Stamp diameter: 63 mm -Stroke: 110 mm -Lifting capacity: 20 t -Overall dimensions: 1990/4025/H1920 mm -Weight: 5060 kg

Standard: IEC 34-1, rated power: 114.7kW, rated speed: 1,885rpm, duty type: S1 (continuous duty), insulation class: H-RISE F, armature voltage (Arm.): 460V, armature current (Arm.): 271A, excitation voltage (Exc.): 340V, excitation current (Exc.): 5.43A, protection class: IP23S (drip-proof, open ventilated), cooling: IC06 (forced ventilation by mounted fan), mounting arrangement: IM1001 (B3 foot-mounted design), weight: 455kg, standardized dimensions (IEC frame size 180), shaft height (H): 180mm, foot mounting hole spacing width (A): 279mm, foot mounting hole spacing length (B): 279mm (L version), shaft diameter (D): 48mm (optional 55mm reinforced version), shaft extension length (E): 110mm, mounting hole diameter (K): 15mm, CE marking available. An on-site inspection is possible.

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate with feet, cyclone and all inlet / outlet pipes., Additional features:, � ��Excluding:, - Waterbox with water valves., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 5.000 rpm, Motor: 22 kW - 380 V - 42 A - 1.450 rpm - 50 Hz - 3 Ph, Weight: ± 1.650 kg, Dimensions: 145 x 110 x 175 cm

7pcs MWM Deutz TBDG 441 CV16 (dual fuel) year 1990- 1993, 6 pcs. functional, spare parts, turbochargers, injection pumps Cylinder head, starter ec. ec. 6pcs Generator 6600V 50Hz 1976KVA

Thread milling machine WMW GFL 400x2000 with change gears.

Blowing machine Kosme KSB 4000 year of manufacturing: 2003 capacity: 4.700 bph incl. preform feeding system neck type: PCO 1810 The machine is out of production since October 2025 and it is already dismantled:

Aircooled chiller/Heat pump YORK YCPB 420 364 kW/406 kW Cooling capacity: 364 kW / 103.5 tons (12/7 — 35°C) Heating capacity: 406 kW / 115.44 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss PSH105A4EPA (scroll) + 2 pcs. Danfoss PSH065A4EPA (scroll) Type of refrigerant: R454B Number of fans: 7 pcs. (Frequency inverter) Dimensions: 4.45x2.25x2.42 m. Weight: 3100 kg. Working hours: 107/80/98/58 h. Condition: Outlet

This 5-axis Kitamura Mycenter-4XT was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 15,000 rpm and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter-4XT vertical machining centre we have for sale. Contact us for further details.

X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible.

Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.

B+S/Heino Ilsemann Labelling & blister packing line for ampoules and vials comprising: Bausch + Ströbel ESA 1025 high output self-adhesive labelling machine suitable for ampoules/vials, object diameter up to 36 mm, object height up to 140 mm, output up to 370 1ml.-ampoules/vials per minute and up to 290 5ml.-ampoules/vials per minute direct transfer of the ampoules to Heino Ilsemann BMP-400 blister machine for ampoules in blister without lidding foil, automatic feeding system for placing the ampoules into the blisters, max. drawing depth 35 mm, max. forming width 270 mm, max. usable punching area 250 x 180 mm, punching cycles max. 40 per minute, capacity up to 320 blister per minute. includes format parts for DIN-ampoules of 1, 2, 5 and 10 ml. and vials with a diameter of 16 and 22 mm.

Key data: 5000 mm, 17000 mm, 4000 mm

5-axis CNC Turning and Milling - Year of manufacture: 1970 (modernization: 1984, 2006 and 2015) - Control system: Siemens 840D - Table diameter: 5000 mm - Maximum turning diameter: 17,000 mm - Maximum working height: 4000 mm - Milling length: 8500 mm (movable table) - Table speed (max): 40 rpm (100 kW) - Maximum table load: 100 tons Accessories: - Milling head (800 rpm / 60 kW) - Universal milling head (630 rpm) - Front slider for diameters up to 1000 mm - Grinding equipment - Angle head 90 degrees (630 rpm) - Small 90-degree angle head (450 rpm) - Multiple tools.

The machine is in good technical condition, testing is possible after prior agreement. The machine is offered without a divider.

General SKU254Y255 MakeLoeffler TypeMaxilinefilter MBF-411/412-S-BS-M No.B25981L1740 Pressure Working pressure10 Bar Vacuum possiblecheck Working pressure jacket8 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface1.44 m2 Specified Features - Candle filter Candle filtercheck Filter surface1,44 m² Number of candles4 Candle sizesø 165 x 650 mm Liquid outletDN80 Max. temperature200 °C Top connections2x DN40 Capacity203 l. Vessel sizesø 550 x 855 mm With jacket22 l. MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) With jacketcheck General Year of construction1991 Mounted on legscheck LocationBarneveld Floorspace1 x 0,9 m Total height1,7 m Weight650 kgOintmentsCandle filtersFine chemicalsBiotechnologyAgrochemicalsFeed additivesSolventsCosmeticsDetergent & surf.Other pharmaceuticsFood additivesLubricants & oleoDairyCon ...

Wood production line manufactured in 2006. This HUNDEGGER K2-4-450 features a maximum log length at infeed of 13 m and at outfeed of 12 m. The machine includes a fully automatic beam turning station and various cutting and drilling units for versatile operations. If you are looking to get high-quality timber framing capabilities, consider the HUNDEGGER K2-4-450 machine we have for sale. Contact us for further details.

Key data: 342000 KW, 427000 kVA, 13800 V

QUALITY USED, 342 MW, 13,800V. 60 HZ. HFO POWER PLANT 342 MW, 60 Hz. Complete HFO Power Plant Complete Power Plant Quality Use, with Thirty Eight (38) MAN 18V32/40CD and two (2) MAN 9L32/40CD with HYUNDAI Generators ENGINES: ▪ Manufacturer: MAN/STX, Type:18V32/40 CD, Output power: 9.037 kW, Number of cylinders: 18, Speed: 720 rpm ▪ Manufacturer: MAN/STX, Type:9L32/40 CD, Output power: 4.37 kW, Number of cylinders: 9, Speed: 720 rpm Manufacturing Year: 2008, approximately 300 hours of use since the last overhaul GENERATORS ▪ Manufacturer: HYUNDAI, Type: HSGD 1011K10, ▪ Output power: 10.954 kVA, Current: 458.3 A, Frequency: 60 Hz, Speed: 720 rpm ▪ Manufacturer: HYUNDAI, Type: HSR7 943 10P, Output power: 5.444 kVA, Current: 227.8 A, Frequency: 60 Hz, Speed: 720 rpm, Power factor: 0.8, Insulation class: F, Power factor: 0.8, Insulation class: F Ready for d ...

Bed Size:Left to Right 393mm 15.5 in Front to Back 393mm 15.5 in Daylight Between Tables 559mm 22 in Daylight Between Heated Platens 353mm 13.9 in Heating Electrical Induction Heated Platen Sizes(Up To) 355mm x 355mm 14″x14″ Max Working Platen Temperature 220°C Main Ram Stroke(Up To) 355mm 14 in Hydraulic Circuit Pressure 70 Bars 1000 PSI Main Ram Pressing Force 41 T 40 Ton Main Ram pull back 2.2 T 2.2 Ton Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s

Screw diameter: 75 mm Injectable volume: 1657 cm3 Injection pressure: 2121 bar Column passage: 820 x 820 mm Moulded thickness: minimum: 300mm- max: 850 mm Opening stroke: 950 mm Number Of Cores :3 Robot interface: E12

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. -Type: NNU4960E4C3DR -Outer diameter: 420 mm -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 420 x 120 mm -Weight: 34.7 kg/pc.

General SKU242N155 LocationBarneveld MakeGebrüder Lödige Maschinenbau GmbH Paderborn TypeFM-450 D No.16603 Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume450 Ltr. Motor11 KW Specified Features - Powder turbo mixer Lödige mixerLiquid Processing Mixer T-armscheck Useful capacity450 l Trough sizesø 650 x 1500 mm Top connectionsø 200 mm Inspection hatch600 x 370 mm Outletø 25 mm With jacket60 l Max. temperature110 °C With adjustable packing glandscheck Motor11,0 kW, 400/690 V, 1465 rpm Speed mixing shaft135 rpm MaterialStainless steel 1.4306 (304L) With jacketcheck General Year of construction2011 Mounted on framecheck Floorspace3,05x1,2 m Total height1,5m Weight800 kg Extra SpecificationsSpecial design, suitable for liquid mixing and processing applications.Tea, herbs & coffeePowder turbo mixersStarchOther chemica ...

Screw diameter: 90 mm Injectable volume: 2862 cm3 Injection Pressure: 1472 Column passage: 1100 x 1100 mm Moulded thickness: minimum: 450mm- max: 1200 Opening stroke: 1200 mm Number Of Cores :0 Robot interface: E12 28 heated zones

General SKU327X691 MakeDe Dietrich TypeAE 400 No.69199 Year of construction2008 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume533 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity400 l (533 l.) Vessel sizesø 1000 x 1000 mm Dished bottomcheck Top connectionscheck OutletDN100 with pneumatic valve With jacket120 l. Max. temperature—5 / 90 °C, jacket temp: —25 / 90 °C With propellor stirrercheck Motor1,5 kW (400 V, 1390 rpm, (Ex)) Speed mixing shaft168 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009U) General LocationBarneveld Floorspace1,20 x 1,20 m Total height3,30 m Weight1300 kg CEcheck Extra SpecificationsThe vessel is designed per Directive 94/9/EC (ATEX), Category II 2 G, Zone 1 ...

Screw diameter: 55 mm double thread Injectable volume: 582 cm3 Injection pressure: 2200 Column passage: 780 x 780 mm Moulded thickness: minimum: 760mm- maximum: 1190 mm Opening stroke: 760 mm Number Of Cores :2 Robot interface: E67 36 heated zones

General SKU107W542 MakeVevey S.A. No.256 Year of construction1963 LocationBarneveld Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor15 KW Specified Features - Paddle dryer Paddle dryer(1x) Capacity4000 Ltr Trough sizesdia. 1400x3000mm Manhole± 400x250mm (2x) With jacketcheck Shaft can be heatedcheck With adjustable packing glandscheck Motor± 15,0 KW MaterialStainless steel With jacketcheck General Weight6000 kgOintmentsPaddle dryersFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDiscountCosmeticsOther pharmaceuticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicGeneric medicinesPowdered foodsVeveyIndustries > Pharmaceutical > OintmentsDryers > Paddle dryersIndustries > Chemical > Fine chemicalsIndustries  ...

With extra long infeed conveyor of 1600 mm, Belt width: 400 mm, Product thickness: 3 - 51 mm, Belt speed: 0.36 - 24 m/min, Compressed air: 0.7 l/min, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 3300 x 1100 x 1500 mm, Weight: 650 kg

General SKU323S578 MakeConstructiebedrijf verkouille TypeASME VIII DIV1 No.A0202 Year of construction2002 LocationBarneveld Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4500 Ltr. Motor3 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4500 Ltr. Vessel sizesdia. 1600x2665 mm Dished bottomcheck Dished top sidecheck Manhole600 mm Top connections3100, 500, 500, 500, 100, OutletDN 100 Half coil jacketedcheck Max. temperature-20 °C/ 160 °C With paddle stirrercheck Motor3 kW 220/300 Volt With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) General Floorspace2x2 m Total height5 m Weight3000 kgOintmentsStainless Steel ReactorsFine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersCatalysts & fillersSolventsCosmeticsDetergent  ...

This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information.

This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine.

General SKU244Y171 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor11 KW Inlet diameter22 mm Specified Features - Basket centrifuge Basket centrifugecheck Closed basketDuplex 2205 Capacity100 dm³ Basket sizesø 800 x 400 mm Max. loading weight125 kg Hydraulic operatedcheck Liquid outletDN100 With hydraulic unitHydra power Motor1,50 kW, 400 V, 1445 rpm With variable speed drivecheck Max. basket speed2600 rpm Max. temperature0° / 80 °C MaterialStainless steel 1.4404 (316L) General MakeRiera Nadeu Serial10590/P19/00726 Type200D 800 x 400 PI Year of construction2020 Mounted on foundation platecheck With switchgearcheck Floorspace2,60x1,30 m Total height2,00 m Weight3400 kg Extra SpecificationsMaximum centrifuge factor: 3,000 g&:nbsp: Pressure casing: 0 / 40 mbar&:nbsp: Maximum allowable specific weight: 1,250 kg/m³&:nbsp: Control syst ...