134,810 used machines on RESALE, but how to find them? Machine Search
A Westema cutting table for precise cutting of soft, flexible materials is available. Table dimensions X/Y: 2250mm/1500mm, max. cutting height: 230mm, cutting speed: 16m/s, motor power: 1.1kW. Including quick clamping and grinding device. Documentation available. An on site inspection is possible.
cutting diameter: 450 mm saw band length: 6600 x 41 x 1,3 mm table height: 800 mm : 450 mm : 450 mm : 450 x 270 mm workpiece weight: 15 - 95 m/min : 7,5 kW work height max.: 3000 kg connected load: 3750 x 1400 x 2100 mm Control: NEW PRICE ~ 40.700 EURO very good condition Semi-automatic bandsaw, two-column guided Equipment: - hydraulic vice - infinitely variable cutting speed - chip conveyor - line laser - driven chip brush - coolant device - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible.
weight: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.
Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: Bosch RRU 3063 washing machine Bosch HQL 2220 sterilising/pyrogenising tunnel Filling/capping machine Bosch ALF 4060 Labelling machine Bosch ERS 2010 (500) Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton Skinetta ASK 450-bU banding machine Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h Capacity for ERS 2010 max. 30,000 ampoules/h With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) Menu languages English, Mandarin PLC Siemens S7-300 Danfoss VLT 2800 servo inverter CE decla ...
Offer B&R EX 481 + AF104 equipped with AO352 and AI774 for sale.
Offer B&R EX 484 + AF104 equipped with 2x AI774 and an AO352 + 4x DM465 for sale.
Offer B&R EX 481 + 3x AF104 + 2x AI774 + 4x AT664 + AT 324 + 2x AO352 + DM 465 for sale.
Reference ID: PP-57196 Category: 4-Colors Manufacturer: Komori Model: LS 440 Year Built: 2003 Colors: 4 Impression: 110 million Max. size: 720 x 1030 mm Condition: Good Location: Europe Availability: Immediately Machine Description: 4 colors Komorimatic Dampening Unit SAPC Semi-Automatic Plate Change Temperature Control & Technotrans Cooling Powder Sprayer Blanket Washing Device Ink Roller Washing Device Skeleton cylinders IR Dryer 110 million impressions Complete rollers renewed
Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder
1 x 6 x HSN skid, 1 oil cooler, 1 condenser, 2 x 50kw evaporators, 2 x 90kw evaporators, 1 electrical cabinet, 2 x Munters dehumidifiers.
Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt
Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.
A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026.
Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...
Cutting area round/square: 190/190 x 190 mm Cutting area in mitre 45° round/rectangle: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 Lifting speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Space requirement: 1200 x 600 x 980 mm
Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - .ucymachines/ Contact us at - sales@ucymachines
Machine Name: Decanter Centrifuge Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year of Make: 1993 Max. Drum Speed: 3250 1/rpm Material: Stainless Steel Drive motor: 18.5 / 21 kW Inner diameter drum: 353 / 198 Inner drum length: 1200 mm Permissible. Sediment density: 1.2 kg/dm3 Dimensions: Length 3000 x Width 1000 x Height 1150 mm Curb weight: 2500 kg Tech. Documentation: Yes Remark: Eddy current brake Accessories: A control cabinet Condition: Used Price: On request
In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.08.2003 Category: Truck Body name: semi-trailer Exterior color: blue Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Drive: 6 x 2 Certificate of Registration: EM250897
Injection moulding machine Engel DUO 4550/800 BJ 2004
In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.04.2006 Category: Truck Body name: semi-trailer Exterior color: green Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Transmission: Manual Drive: Rear Certificate of Registration: EN403451
Bacterial removing separator (Bactofuge) with nozzles. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, new base plate, feet, desludge cyclone, OWM watervalve and service tools for maintenance including pressing tool. , This Bactofuge is already convertered to a rubber damped silent gear drive!, Additional features:, Excluding:, - Control panel., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 13.000 liter per hour, Bowl speed: 4.150 rpm, Motor: 45 kW - 1.465 rpm - 400 V - 50 Hz - 84,5 A, Weight: 2.700 kg, Dimensions: 165 x 135 x 190 cm
Technical data: Manufacturer: Tesa Brown&Sharpe Type: Derby Etalon 454 Year of Make: 1998 Measuring range X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transducer: Renishaw TP-ES Dimensions and weight Weight: approx. 250 kg Condition Condition: Used Functional: Tested and fully functional
Hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Motor: 80 x 60 x 40 cm
Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (15 kW), motor cover, cyclone, base plate, feet, water box with water valves, inlet and outlet pipes with manometers and service tools for maintenance., Additional features:, Excluding:, - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.450 rpm, Motor: 15 kW - 380 V - 50 Hz - 1.450 rpm - 30 Amp - 3 Ph, Weight: 1.550 kg, Dimensions: 145 x 110 x 175 cm
Unused hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm
Unused Bowl Spindle for an Alfa Laval MRPX 409 SGV Separator., Type of Machine: Bowl Spindle, Drive line: 50 Hz
grinding diameter: 850 mm grinding length: 4.000 mm centre height: 525 mm workpiece weight max. betw. centres with steady: 5.000 kg control: SINUMERIK 840 D Feeds & travels: - feed Z-axis: 0,01 – 6.000 mm/min feed X-axis: 0,01 – 6.000 mm/min Travel Z-axis (table): 4.500 mm Travel X-axis (grinding spindle): 650 mm Grinding wheel: - Max. Dimension: Ø1.060x60x304,8 mm grinding wheel speeds: 1.100 min-1 peripheral speed: 45 m/sec power: 22 kW tail stock: - Taper: MK 6 quill travel: 100 mm diameter of quill: 115 mm Workpiece spindle: - Taper: MK 6 Speed range workpiece: 10 - 120 min-1 torque of the drives: 41,5 NM control: total power requirement: 52 kW weight of the machine ca.: 25,5 t Equipment & Accessories CNC cylindrical grinding machine in most robust design for heavy workpieces • Scope of geometric retrofit: • Slideways of X- and Z-axis regrinded, intermediate table and top ...
spindle passage: 80 mm max. turning diameter: 395 mm Max. Turning length: 750 mm control: System TX 8H max. Spindle speed: 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Standing sheet delivery GUK KS 430; cleaned and tested; Working width 430mm; Preparation for foosball; suitable for connection to GUK folding machines. Smal fold vertical stacker GUK KS 430; cleaned and checked; working width 430mm; control system for kicker; used for GUK folding machines.
4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine
Manufacturer: WEBER Type: MSG 460 Power: 0.18 kW Power supply: 400 V/50 Hz Weight: 120 kg Dimensions: Depth 600 x Width 540 x Height 760 mm A special device for precise sharpening of knives. The MSG 460 type is designed to ensure high sharpening quality and suitable blade geometry, which is necessary when processing meat, cheese and other foods where maximum cutting precision is required. Blade diameter range: 420–460 mm Sharpening angle adjustment: 15°-35° Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60
Manufacturer: Harald Baumgarten/Sema Systemtechnik Model: TM 400S Year of Manufacture: 2014/2015 Type of Machine : Angle Grinding System The system consists of the following components: - Cut-off grinding machine type TM 400 S with bundle loader (manufacturer Sema Systemtechnik, - rod breaking device, - Rod rotary drive / measuring station - Weighing station with section sorting, - Extraction and filtration system, - Soundproof booth (manufacturer: HüWa Schallschutz und Anlagenbau) and protective fencing - Four-column press (Manufacturer: Winter Presses) - Hydraulic power unit with hydraulic pumps - Control cabinet and control panel Find more here - .ucymachines/ Contact us at - sales@ucymachines
grinding diameter: 850 mm grinding length: 4000 mm centre height: 425 mm control: Siemens 8 max. workpiece weight between centres: 3000 kg workpiece weight in steadies max.: 4000 kg max. workpiece weight -without tailstock: 300 kg vertical Stroke: 0 - 90 °/deg. work piece spindle speed: 23 - 230 U/min workpiece-spindlehead motor: 5,3 kW grinding spindle head - swivable: +30 / -10 °/deg. dimensions of grinding wheel: 750 x 125 x 305 mm table feed: 0,01 - 4000 mm/min rapid traverse of table: 10 m/min table swivelabel +/-: +3 / -3 °/deg. grinding wheel speed: 25 - 50 m/sec grinding motor: 19 kW dimensions: 14,0 x 3,13 x 2,6 m total power requirement: kW weight of the machine ca.: 19,4 t dimensions of the machine ca.: m Universal external cylindrical grinding machine, modernised in 2011 Siemens 828D control system Internal grinding head, swivelling MPM grinding wheel balancing machine ...
New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel
Edhard Filling & Dosing Machine PS-4030Edhard Filling & Dosing Machine / NEWDozing Machine PS-4030Power: Â Â 93 WattDetails see pictures
Edhard Dosing Machine PV-4001Dosing Machine PV-4001Power: Â Â 186 WattConnected Values: 240 V, 50/60 HzDetails see pictures
Edhard Dosing Machine PVS-4101Edhard Filling & Dosing Machine / NEWSoding Machine PVS-4101Details see pictures
Sourdough plant with cooling ThörmerManufacturer : ThörmerType: TSHKWA 4001With built-in own aggregate Condition: Not tested must be checked completelyDetails see pictures.Payment: Bank transfer or cash payment
Hoshizaki Ice Maker Stainless SteelProduct descriptionManufacturer: Hoshizaki Ice MakerMod.: FM-480AKE-HC-SBstand: used, functional, baker's condition - please clean thoroughly before useMaterial: Stainless steelYear of construction: Unfortunately it is not on it but probably a few years oldWith reserve containerStandard voltage: 220-240 V~ 50 Hz 5.3ADedetails see pictures.
Puller Wipes 4610x560mm NEWÂ ( 4 pieces )Puller Dimensions : W: 4610mm D: 560mm7 Holes We have different large puller wipes in stockDetails see picturePlease measure your puller cloths from one side to the other after purchase an exchange or return is excluded is only for tradespeople. Â
König Mini Rex 4000 Roll Plant  Product descriptionManufacturer: KönigModel: Mini RexType: 4000 TR/G-S SKG58+RK58Year of construction: 2007Roll plantModel: G 2000Type: SA2König G2000 Compact plant for round-knitted, stamped, oval or folded-long-rolled. The compact proofer with an hourly output of approx. 2,500 pieces is the ideal solution for micro and small businesses or in-store bakeriesCompact pre-proofer system with Mini Rex Futura head machinemax. Hourly output in proofer operation: 2,000-2,500 pieces, infinitely adjustable for higher output
Puller Cloths 4600x560mm NEWÂ ( 4 Pieces )Puller Dimensions : W: 4600mm D: 560mm7 HolesWe have different large puller wipes in stockDetails see picturePlease measure your wipes from one side to the other after purchase an exchange or return is excluded is only for tradesmen. Â
Puller Cloths 4200x570mm NEWProductor Dimensions : W: 4200mm D: 570mm6 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded, it is only for tradespeople.
used bread slicer WABÄMA SIGNA 460.10Cut bread slicer Bread slicer Automatic 230 V mobileManufacturer: WabämaType: SIGNA Classic ELEKTRONIK 460.103,20 AÂ Â 750 W 230 VSchnittbrotgatter with crumb drawerAutomaticMembrane keyboardRobust machineSpeedsOil controlCutting thickness: 10 mm / Cutting width: approx. 42 cmDimensions:Width: approx. 58 cmDepth: approx. 80 cmHeight: approx. 112 cmCutting width: approx. 42 cmCutting thickness: 8 mmDetails see pictures
Circular knife Bread slicer Treif Diskus  Product description Manufacturer: Treif Maschinenbau GmbH Model: Diskus 400 Material: stainless steel Condition: used, functional, bakery condition - please clean thoroughly before use Year of construction: 2010 Cutting width adjustable With circular knife / round knife Mobile, on castors  Details see pictures
maximum number of results exceeded
please refine your search
