4 side used for sale

x-travel: 1120 mm y-travel: 350 mm z-travel: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

Pressure: 11 bar Motor: 0,04 kW Free air delivery: 41,7 m³/min Measurement (WxHxD): 1530 x 2210 x 1040 Weight: 1075 kg Compressed air connection: DN 80

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Daylight: 760 mm Ram surface: 800 x 800 mm Table surface: 810 x 1000 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

feed pressure: 24 bar liter capacity: 160 l/min total power requirement: 1,5 kW weight of the machine ca.: . t dimensions of the machine ca.: . m High pressure pump The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply. About usmore than 400 of our own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopIf you want to sell machines production lines or your company, please contact us.You will find further offers on our website. Visits are possible by arrangement.We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure: 10 bar Free air delivery: 41,7 m³/min Measurement (WxHxD): 650 x 2210 x 1040 Weight: 385 kg

Stock# U2443-4 Used stainless steel jet stream mixer by Ystral Gmbh (DE) type Y12.500L.LL/LDT-4DA GMP. Agitator is directly driven by el motor 12.5 / 3.5 kW, 1465/725 rpm, 400 V, 50 hz. Shaft has working length 1100 mm. Cage has internal diameter 245 mm. Three blade propeller has diameter 200 mm.

Inv. Num. : 8265 Type: FU 400/V/2 Producer: Heckert Generated: Parameters: Work table length: 1600 mm Work table width: 400 mm Maximum vertical spindle speed: 1400 1/min X-axis travel: 1150 mm Y-axis travel: 370 mm Z-axis travel: 430 mm Machine height: 1980 mm Machine length: 2490 mm Machine width: 2270 mm Machine weight: 3850 kg

Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Manufacturer: Giardina, Type: Dualtech 401, Year: 2007, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 1500, Spraying line: Ja, Conveyour system: Band, Laquer circles: 3, by rollers: Ja, Jet dryers (number): 2, Sanding machines (number): 1, Design sanding machine no 1: Costa CT 32/1350, IR dryers (number): 1, Belt conveyors (number): 1, Jet dryers (number): 2, Year :2007

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Manufacturer: Becker , Type: SV.5.430/2, Year: Turbine zum Kühlen von Transportkette, Control: A 1781760, Year :Turbine zum Kühlen von Transportkette

Manufacturer: Kuper, Type: KFE TAN 2 1600/450, Year: 1979, Control: Kuper, Foil wrapping machine mm: 1600, Foil stations: 1, Welding frame dimensions mm: 1450, Intermediate transport mm: 3.000, Shrinking tunnel mm: 4.800, Schrumpftunnel kW Leistung: 70, Heating: Elektro - 59 kW, Through running hight mm: 200, Working width mm: 800, Conveyour system: Band/Stange, Year :1979

Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.

Vertical turning machine manufactured in 2008. This HONOR SEIKI VL 46A features a maximum turning diameter of 460 mm and a turning height of 400 mm. It is equipped with a chuck diameter of 300 mm or 380 mm and a spindle speed of up to 3000 rpm. If you are looking to get high-quality turning capabilities, consider the HONOR SEIKI VL 46A machine we have for sale. Contact us for further details regarding this machine.

This 4-axis Mazak NEXUS 4000 II was manufactured in 2011. It features an X-axis travel of 560 mm, Y-axis travel of 630 mm, and Z-axis travel of 640 mm. The machine has a maximum workpiece diameter of Ø630 mm and a weight capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 4000 II horizontal machining centre we have for sale. Contact us for further details.

This 4-axis HBS MPW 2010/3K/4MZ/1FK was manufactured in 2019. It features a maximum X-axis travel of 1450 mm and Y-axis travel of 2250 mm, with a motorised working stroke of 0-200 mm. The machine is equipped with advanced servomotor technology and includes a fully automatic stud feeder and a chip extraction unit. If you are looking to get high-quality welding capabilities, consider the HBS MPW 2010/3K/4MZ/1FK machine we have for sale. Contact us for further details.

This 3-axis TOPEDM TSH-400N die-sinking EDM machine was manufactured in 2005. It features a working area of 400 x 400 x 440 mm and a table size of 480 x 458 mm. The machine is capable of drilling holes with diameters ranging from 0.15 to 6.0 mm. If you are looking to get high-quality hole drilling capabilities, consider the TOPEDM TSH-400N machine we have for sale. Contact us for further details.

Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: ca.1984, Control: Hand , Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnitthöhe min-max mm: ca. 70, Schnitttiefe min-max mm: 100, Schnittlänge min-max mm: 3500, Power saw engine kW: 3 KW,100 Hz, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Bohreinheit Horizontal: 100, On customer order: inkl. Bohrstation, Year :ca.1984

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.

A+F cartoner available. Packaging capacity: approx. 25cycles/min, carton length range: 200mm-800mm, carton width range: 150mm-600mm, carton height: 300mm, product diameter: 95mm, max. product height: 300mm. Machine dimensions X/Y/Z: approx. 4000mm/2000mm/2200mm, weight: approx. 3000kg, control system: Siemens S5. Documentation available. An on-site inspection is possible.

An Nd:YAG dental laser welding unit is offered. Manual welding chamber with hand opening, laser type: Nd:YAG laser, wavelength: 1064nm, max. pulse energy: 40J, max. average power: 30W, laser class: 4, control: analog and digital keypad control with display. Equipped with Leica stereomicroscope with binocular tube, footswitch, shielding gas connection, hand openings. Inspection by appointment is possible.

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984

TREIF

- HA4 backgauge X, R, Z1 and Z2 - WILA NewStandard Top Tool clamping - Power on Hours 26.000 H - PILZ Laser safe  - 2 x Arm on front 1000 mm

Surface grinding machine manufactured in 2006. This STAEHLI DLM 450 features a lapping wheel diameter of 450 mm and a maximum lapping wheel speed of 110 rpm. It has a robust machine weight of 2100 kg and dimensions of 1200 × 1650 × 2050 mm. If you are looking to get high-quality lapping capabilities, consider the STAEHLI DLM 450 machine we have for sale. Contact us for further details regarding this machine.

Roll bending machine manufactured in 2006. This FACCIN 4HEL 2134 features a maximum plate width of 2,100 mm and a maximum plate thickness of 28 mm. It is equipped with linear guides and has a top roll diameter of 350 mm. If you are looking to get high-quality rolling capabilities, consider the FACCIN 4HEL 2134 machine we have for sale. Contact us for further details.

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1889 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports, End stop included Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...

-Noise Rating: 55 dB at 7m; Gross weight [kg]: 1300; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500

; Power [PS]: 2039; Gross weight [kg]: 20560; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

B&A REF: 9108 TON: 430 SCREW DIAMETER: 80MM SHOT WEIGHT: 1645 STROKE VOLUME: 1810CM3 INJECTION PRESSURE: 1615AR PLATEN SIZES: 1060 X 1135MM DBTB: 680 X 760MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 730MM MAX DAYLIGHT: 1530MM EJECTOR STROKE: 250MM CONTROLS: COLUMBIA CORE PULLING: 3 AIR VALVES: 4 MOTOR: 45 HEATING CAPACITY: 34KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

; Gross weight [kg]: 3976; Engine: Baudouin 6M21G440/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 580

; Gross weight [kg]: 1494; Engine: Baudouin 4M10G110/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger., Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120

; Gross weight [kg]: 1055; Engine: Baudouin 4M06G55/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A 5P; Water Tank Volume [l]: 87

; Gross weight [kg]: 922; Engine: Baudouin 4M06G44/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 785; Engine: Baudouin 4M06G25/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 2x 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 110

BYSTRONIC ByStar 4020 laser cutting machine was built in 2011 by the renowned Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 25 mm. Materials made of e.g. steel or aluminium are machined using a laser beam with a maximum power of 6 kW and a thickness of just a few μm. It ensures extremely precise workpiece edges, which are characterised by unprecedented smoothness and absence of irregularities. The offered ByStar 4020 laser cutting machine is also extremely easy to operate. The process parameters are programmed in the intuitive ByVision CNC control, which allows the creation of advanced machining programmes in just a few steps. All this makes the BYSTRONIC laser the perfect choice for any industrial plant. Technical specification of the BYSTRONIC ByStar 402 ...

Cooling unit EPCS -Model: QSI-2-6GE-40Y-H4 -Compressor type: 6F-40.2Y (x2) -Volume: 151.6 m3/h (x2)) -Cooling capacity: 201.8 kW at -5°C/40°C, 166.2 kW at -10°C/40°C, 85.6 kW at -25°C/40°C -Dimensions: 4800 x 2300 x 2250 mm -Number of fans: 4 x 1000 mm -Year of production: 2018 -Quantity in stock: 1 -Condition: used in good condition

Separator IFB 403 X-73 7500r/min 3-50/60Hz 230V Used tools

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T

Mecalux roller conveyorRoller conveyor 1950-540-450 RA1927 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1950 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1950 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e- ...

Key data: 1500 KW, 1490 1/min

Siemens 1.5MW DC Motor with Watercooler incl. Simovert Masterdrive (Watercooled) Description attached