4 side used for sale

Manufacturer: Linde Type: H30D Diesel Forklift Year of Make: 1988 Serial number: 351811010430 Load capacity: 3,000 kg Net weight: 4,910 kg Operating hours: approx. 14,880 h Sideshift 4 wheels Forks available Overhead guard available UVV/test sticker available No visible leaks were detected on the forklift during the recording Oil/liquid stains visible on the cardboard underneath could not be clearly assigned to the forklift Auction-ID: A1-50373-81240

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45120-2240

Note: There are several identical containers from the inventory. Other identical containers as well as containers in other colours will be offered in separate auctions. 40ft high-cube storage container with multiple doors Manufacturer: Dong Fang International Container Co., Ltd. (DFIC) Year of construction: 2025 ISO Type: 45G3 High-cube design with increased interior height Multiple side access doors along the entire length of the container CSC certified Gross weight: 24,000 kg Net weight: 4,260 kg Payload: 19,740 kg Volume: approx. 74.3 m³ External dimensions: approx. 12,192 x 2,438 x 2,896 mm (L x W x H) Interior clean and almost unused Doors and latches functional Slight traces of use due to storage and transport present Overall condition: as good as new / one-trip version Scope of delivery: 1 container from the existing stock. /b> Auction-I ...

Manufacturer: Mitsubishi Heavy Industries Type: FG20 Vehicle type: Forklift / Forklift Propulsion: LPG / Propellant Gas Load capacity: 2,000 kg with 500 mm load centre Max. lifting height: 3,000 mm Net weight: 3,400 kg Serial number: E17-00643 Operating hours: approx. 4,561 h according to the operating hour counter Tyres: solid rubber tyres Attachment: hydraulic sideshift Sideshift: SACO Type S 2156 Year of construction sideshift: 1978 Load-bearing capacity of the sideshift: 2,500 kg with a load centre of gravity of 500 mm Forks: 2 pieces, length approx. 1,600 mm Additional accessories: hydraulic bucket included Bucket: with hydraulic cylinder and quick couplings Additional: two long fork extensions / tines available Auction-ID: A1-50373-8013

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45120-2239

Axle 1: Left 9 mm Right 6 mm Axle 2: Left 9 mm Right 10 mm Shaft 3: Left 5 5mm Right 5 11 mm Manufacturer HAMMER Model 195D SIDELOADER 36 TON Year 2009 Condition Used Stock number 008134 Wine YT995D07091002550 Connections: 45 FT 40 FT 2X20 FT 30 FT 20 FT MIDDLE Weight 12800 KG Payload: 41200 KG Ash maker BPW Number of axles 4 Number of tyres 8 Tyre size 435/50 R19,5 Suspension Air Brakes Disc Extra: 2nd fifth wheel on the back of the trailer. Please note! Photos with a red trailer and a green tractor are only for demonstration of the application possibilities, these are not included in the lot! Auction-ID: A1-47422-86

Note: There are several identical containers from the inventory. Other identical containers as well as containers in other colours will be offered in separate auctions. 40ft high-cube storage container with multiple doors Manufacturer: Dong Fang International Container Co., Ltd. (DFIC) Year of construction: 2025 ISO Type: 45G3 High-cube design with increased interior height Multiple side access doors along the entire length of the container CSC certified Gross weight: 24,000 kg Net weight: 4,260 kg Payload: 19,740 kg Volume: approx. 74.3 m³ External dimensions: approx. 12,192 x 2,438 x 2,896 mm (L x W x H) Interior clean and almost unused Doors and latches functional Slight traces of use due to storage and transport present Overall condition: as good as new / one-trip version Scope of delivery: 1 container from the existing stock. /b> Auction-I ...

Hot drinks vending machine - body in poor condition Brand: Necta Model: Kikko RY Power supply: Single phase (230V - 50Hz) Dimensions (W x D x H): 540 x 690 x 1700 mm Used equipment sold as is, not refurbished and untested. Vesto reference: V8777 Auction-ID: A1-50906-226

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45120-2241

Note: There are several identical containers from the inventory. Other identical containers as well as containers in other colours will be offered in separate auctions. 40ft high-cube storage container with multiple doors Manufacturer: Dong Fang International Container Co., Ltd. (DFIC) Year of construction: 2025 ISO Type: 45G3 High-cube design with increased interior height Multiple side access doors along the entire length of the container CSC certified Gross weight: 24,000 kg Net weight: 4,260 kg Payload: 19,740 kg Volume: approx. 74.3 m³ External dimensions: approx. 12,192 x 2,438 x 2,896 mm (L x W x H) Interior clean and almost unused Doors and latches functional Slight traces of use due to storage and transport present Overall condition: as good as new / one-trip version Scope of delivery: 1 container from the existing stock. /b> Auction-I ...

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15° Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15° Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-22

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners, Verifone pin terminals and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-10

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-24

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners, Verifone pin terminals and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-12

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-18

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-19

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners, Verifone pin terminals and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-14

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-7

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners, Verifone pin terminals and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-11

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-23

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-2

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-16

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-21

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-20

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-6

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners, Verifone pin terminals and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-13

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners, Verifone pin terminals and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-8

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-25

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-3

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-5

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-17

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-15

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-4

Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners, Verifone pin terminals and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-9

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Feed motor: 4 kW Dimensions (L/W/H): 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer customer is still working on it, machine can be visited -------------------------------------- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm ------------------------------- ------- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective, these could be reinstalled by an electrician. -------------------------------------- Additional technical data (former order confirmation) attached -------------------------------------- Price of the above-mentioned machine upon  ...

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-51065-32

Extra options: Front lighting - Front blue spot - Rear blue spot - Fingertip steering - Charger included Auction-ID: A3-46142-16462

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-51065-16

- Only used 1 x; - With side door and 2 x side window openings - Payload weight: approx. 26,400 KG - Curb weight: approx. 4,080 KG - Total weight: approx. 30,480 KG - Condition see photos; - Viewing recommended; - High Cube; - Pick-up location: 24601 Stolpe, Germany Auction-ID: A1-51200-23

2-axle agricultural trailer with open loading platform with wooden side boards. Equipped with rotatable/steered front axle and drawbar with towing eye. Steel chassis and superstructure with wooden side panels. Side boards with closures and partially foldable. Trailer is in used condition with visible signs of wear, paint damage, weathering and superficial rust in accordance with age and use. Auction-ID: A3-46141-22183

With 3-part mast With freelift With side shift With power steering With good ties With good battery Leak-proof Viewing by appointment! Auction-ID: A1-40330-141

This gas forklift is equipped with a duplex lifting mast, hydraulic sideshift and forks. Thanks to the side shift, the entire carriage can be hydraulically moved to the left and right, allowing pallets and loads to be positioned more accurately without having to move the forklift every time. Equipped with LPG drive and gas cylinder holder at the rear. The driver's seat features a overhead guard, comfortable seat with armrests and seat belt, rear-view mirror and multi-lever hydraulic operation. The forklift truck stands on industrial tires with clear profile. The mast, lifting chains, hydraulic lines and lifting cylinder are visible in the photos. The forks are included. Machine in used condition with normal to obvious signs of wear, including paint damage, superficial oxidation and wear according to age and use. The driver's seat, on the other hand, looks very neat. A simple, solidly bui ...

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-51065-24