4 side used for sale

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

angle: 0° - 90°; max cutting length: 1370 mm; easy handling and quick mounting on the carriage of the saw for fast and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90

Docking station with PowerCom control; sound booth; without the TimBird Auction-ID: A1-43429-77

Control station with digital readout; noise booth; without the TimBird Auction-ID: A1-43429-82

Powerlock span; control station with touchscreen Powercom control; with sound booth Auction-ID: A1-43429-71

Equipped with: Siemens TD200 control and automatic feed-through; Sound booth. , without the TimBird Auction-ID: A1-43429-2

Equipped with Powerlock span; Control station with touchscreen Powercom control; sound booth ; without the TimBird Auction-ID: A1-43429-74

\" Metal workshop cabinet / side cabinet with 2 drawers Compact sheet steel workshop cabinet in a stable industrial design. Version with: • 2 metal drawers • 1 lockable door • 1 height-adjustable shelf • Cylinder lock • Solid steel construction Condition: Used with normal signs of use, minor paint damage and scratches present. Drawers run, door closes. Sale without content. Dimensions: approx. 380 x 520 x 810 mm (W x D x H) Material: sheet steel Colour: Grey body / front green \" Auction-ID: A7-46417-367

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...

Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Used for pulling and shaping the sides of the shoe. Auction-ID: A7-46462-37

General description Double-sided vertical belt grinder (linisher) manufactured by Frommia, designed for industrial grinding, deburring, and surface finishing of metal components. Robust construction with heavy cast base ensures high stability during operation. Technical details Manufacturer: Ferdinand Fromm GmbH & Co. Model: 805 BD Year: 1991 Serial number: 34/7 Voltage: 380 V Current: approx. 6.1 A Frequency: 50 Hz Belt width: approx. 200 mm Configuration: Double-sided with two vertical sanding belts (left & right) Drive: Integrated central motor Tables: Manual working tables on both sides Dust extraction: Connection available Equipment - Dual sanding stations - Integrated motor drive - Adjustable working tables - Dust extraction port Condition and remarks Used industrial machine made in West Germany. Nameplate available and confirms specifications. S ...

Viewing by appointment Extra options : Lighting , Freelift , Spoon adjuster Auction-ID: A1-40377-56

Technical details Type: Industrial workbench / assembly table with storage Configuration: Steel frame with open shelving and side cabinet Material: Painted steel frame with sheet metal worktop Work surface: Flat steel top Storage: - Approx. 3–4 open shelf levels - Single-door side cabinet Mobility: Fixed installation (no wheels) Accessories: Work lamp and small tools (included, low value) Application: Assembly, fabrication, and general workshop use Condition: Used, with wear, scratches, and typical workshop residue Dimensions and weight (approx.) Length: 1200–1500 mm Width: 600–800 mm Height: 900 mm Weight: 100 kg Auction-ID: A7-46498-227

Viewing by appointment Extra options : Lighting , Freelift , Spoon adjuster Auction-ID: A1-40377-21

Weinig Profimat 23 ATS four-sided planer Working width 230mm Working height 120mm Number of spindles 4 Spindle layout: 11kw pit Rights Left 11kw Top 11kw Pneumatic Material Clamps Feed speed adjustable 5-22m/min Input table length 2470mm 4kw feed motor CE Certificate Lashing diameter 4x140mm Net price

Metal-Fach T703A tipping trailer – used General data • Manufacturer: Metal-Fach • Model: T703A/2 • Condition: used • Year of construction: 2023 • Available: immediately Technical data • Permissible total weight: 5,000 kg • Payload: approx. 3,760 – 3,800 kg • Net weight: approx. 1,240 kg • Loading area: 3,340 x 1,880 mm • Side wall height: 2 x 500 mm • Tilt angle: approx. 35° • Tyres: 400/60-15.5 Equipment & Features • 3-way tipper • Central locking • Grain pusher • Ladder • Robust steel side walls • Sturdy construction Application area • Agriculture • Transport of bulk and general cargo • Farm and field work Condition • Used machine • Good condition • Ready to use Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction- ...

Mateng VGM Junior 180 flail mower – new machine General data • Manufacturer: Mateng • Model: VGM Junior 180 • Condition: new • Year of construction: 2025 • Available: immediately Technical data • Working width: 1,800 mm • Weight: approx. 550 kg • PTO: 540 rpm • Number of legs: 24 • Rotor Ø: 127 mm (377 mm with flail) • Side shift: hydraulic • Cat.: I / II Equipment & Features • Rear & side mulchers (-50° to +90°) • For tractors approx. 50–70 hp • For grass, vegetation and bushes up to Ø 4–5 cm • Collision protection • Adjustable back-up roller • Double counter-blades • Robust construction Application area • Green space maintenance • Embankments & ditches • Agriculture & Municipal Condition • New machine • Ready to use Contact Now Kristina Kreimer – Surplex /  ...

Side table solid wood dark approx. 70x70x52h cm

Barbell rack KETTLER 2-sided, small quantity Weights

Slide diameter: 600mm, tilted table. Auction-ID: A1-45979-112

Sanding diameter: 1000mm, Table tilted adjustable. Auction-ID: A1-45979-126

Sanding diameter: 900mm, tables tilted. Auction-ID: A1-45979-111

Sanding diameter: 800mm, Table tilt. Auction-ID: A1-45979-113

- Number of trees: 5 - Max working width: 220 mm - Max working height: 120 mm - Length of the entrance table: 1950 mm - Shaft diameters: 40 mm - Jointing Motor: 4KW - Motor of both spinning tops: 5.5KW - Planer motor: 5.5KW - Universal shaft motor: 5.5KW - Throughput speed: 4-22 m/min - Tool holders with 4 sharpenable blades - Adjustment of the machine on a SIKO commeter - Centralized lubrication - Grease crank - Enclosure with electromagnetic safety Auction-ID: A1-46801-85

2. Jointer & Planer Combination Capacity: 180x120 mm 2 sharpening blades – central lubrication – double clamping tools Soundproof housing, electromagnetic safety Motors: 4 kW planer / 2 5.5 kW routers / power supply Suction: Ø120/100 mm – Weight: 1200 kg – Dimensions: 3000 x 1000 x 1450 mm Auction-ID: A1-46801-62

- 4 trees - Capacity (mm) 240 mm x 120 mm - Input table dimension 2500 mm - Jointer: 5 kw - Right and left spinning top: 7.5 kw - Planer: 7.5 kw - Drive: 1.1kw - Input table dimension 2500 mm - Noise-canceling lips yes - Rack control - Speeds per drive - Up, down, digital planer shaft - Digital left top - SIKO mechanical digital counter with every axis movement and digital on the dashboard - Cutting tools Helical tool holders with carbide inserts - Suction diameter 4 of 120mm and 1 of 150mm - Dimensions 3900 mm x 1450 mm x 1540 mm - CE standard - Special data: Tabletop lubrication insert in the table // Jointer front drive roller with manual retracting // Polyurethane roller in the table at the outlet -motorized - Protector Yes - Amp Power: 55 Auction-ID: A1-46801-86

2 year warranty (both for business and private buyers) given by the seller himself! so no anonymous import — seller is effectively available after sales for service and follow-up - Delivery possible at home and abroad; price to be discussed - Additional accessories and attachments available separately (e.g. additional buckets, auger, hammer, grapple,...) - Professional compact crawler excavator in the 1.2-tonne class, 11/2025 production, unused and fully operational. This machine combines compact dimensions with extra stability, diesel power and precise control — ideal for earthworks, landscaping, renovation projects and utilities. Designed for intensive practical use and can be used immediately on the site - Professional operation: Equipped with an ergonomic JOYSTICK console with hydraulic control for precise and smooth machine control: Hydraulic joystick control, Integrated control ...

Capacity: 230 × 120 mm Configuration : 5 shafts Jointer: 5 kW Right rotor: 7.5 kW Left rotor: 7.5 kW Planer: 7.5 kW Universal shaft: 5.5 kW Drive: 1.1 kW Speeds per inverter Digital up, down and planer shaft Digital left rotor SIKO mechanical digital counters on each axis movement + digital display on the board Helical tool holders with carbide inserts Tables: Inlet table 2,500 mm Suction: 4 × Ø 120 mm 1 × Ø 150 mm Machine dimensions: 3,900 × 1,450 × 1,540 mm Compliance: CE standard Special data: Integrated table lubrication insert Front drive roller jointer with manual retracting Motorized polyurethane roller at the outlet Safety: Protector: yes Auction-ID: A1-46801-72

Kupfermuhle Vuin 770 2-sided planer – Features Max planing lg: 770 mm Max planing h: 200 mm – min: 3 mm Top cutting depth: 20 mm – less: 12 mm Ø top shaft : 2 x 140 mm Ø lower shaft : 1 x 140 mm P. Planer motors: 11 kW / 5.5 kW P. jointer: 5.5 kW Height adjustment: motorized Feed speeds: 7 / 9 / 12 / 14 / 18 / 24 m/min P. Advanced Engine: 4 kW Table entry reels: 3 Advance steel rollers: 5 Rubber Outlet Rollers: 2 Suction Ø: 3 x 180 mm Weight: 3,650 kg Dimensions: 2,200 x 2,200 mm – H: 2,000 mm Voltage: 380 V, 50 Hz, tri Auction-ID: A1-46801-83

Capacities : Thickness × width: 120 × 230 mm Minimum / maximum width: 20 – 230 mm Minimum / maximum height: 8 – 120 mm Minimum length single piece: 750 mm Speeds: Variable feed: 5 to 24 m/min Spindle rotation speed: 6,000 rpm Composition and equipment: 2,500 mm Input table 2,500 mm Motorised adjustment of machining width and height Adjustments accessible on the front panel with the hood closed SIKO digital meters on each setting Wrap-around and sound-absorbing enclosure with panoramic bay Tool shafts Ø 40 mm Shaft configuration (7 shafts): Lower horizontal shaft: 5.5 kW (7.5 hp) Right rotor: 11 kW (15 hp) Left rotor: 11 kW (15 hp) Vertical shaft: 5.5 kW (7.5 hp) Upper horizontal shaft: 7.5 kW (10 hp) Lower horizontal shaft: 7.5 kW (10 hp) Universal shaft: 5.5 kW (7.5 hp) Dimensions (estimated)Approx . 5,800 × 2,100 × 1,900 mm (to be confirmed) Weight (estimate): Approx. 4 ...

Machine: 4-sided WEINIG PROFIMAT 22 N Year: 1989 Max. working width: 220 mm Max. working height: 120 mm Length of table entry: 1950 mm Feed speeds: 4 - 22 m/min Tools: 4 sharpenable iron holders Axes: QTS digital adjustment Shafts: 6 units, Ø40 mm Motors: 4 kW degau, 2 x 5.5 kW routers, 5.5 kW planer, 4 kW lower motor, 5.5 kW universal shaft Equipment: central lubrication, lubrication crank, electromagnetic safety enclosure Auction-ID: A1-46801-14

Brand: Bulmor Model: EMU 30 Type: Electric multidirectional sideloader Power source: Electric (external charger included) Load capacity: 3000 kg Steering: 4-way / multidirectional Auction-ID: A7-46263-21

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45043-2290

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45043-2291

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45043-2289

Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line inclu ...

Technical Specifications & Performance Data This used bottling line is an integrated SIDEL-based solution for PET still water, engineered for consistent throughput and high line efficiency in beverage production and industrial packaging environments. Nominal speed: 14,400 bottles/hour Bottle formats: 0.06 L, 0.50 L, 0.75 L Container type: PET (neck handling 25–30 mm) Product: Water (still) Core block: Sidel Combi 8-40-8 (SBO 8 blow molder + 40-valve filler + 8-head capper), year 2006 Secondary packaging: CERMEX tray packer for stable tray bundles (small and medium PET formats) Air & cooling: SIAD TEMPO 2 high-pressure compressor 1,500 m³/h; Baltimore Aircoil BAC F-100 evaporative cooling support Conveying: Sidel conveyors for balanced accumulation and smooth transfer Condition: Ready for operation with safety features included Manufacturers involved: Sidel, Cermex, SIAD, Baltimore  ...

Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow. Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 20 ...

Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in  ...

Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavitiesPreform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACI ...