137,631 used machines on RESALE, but how to find them? Machine Search
This grinder has 1 fixed blade and 3 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.
Key data: 5 , 260 mm, 160 mm
Number of Spindles: 5 Spindle arrangement: u-r-l-o-u Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Working width adjustment: digital Working height adjustment: digital Feed speed: 20 m/min Table height constant: approx. 800 mm Bevel units: 1 Diameter of the suction nozzles: 140 mm Weight: 2500 kg Space requirement: 3650x1500x2000 mm Voltage/Frequency: 380V
Key data: 4 , 23 mm, 10 mm
Exhibition machine! Working width (mm): 23 - 180 Minimum workpiece length (mm): 300 Feed speed (r/min): 6 - 12 Engine: Feed: 0.7/1.1 kW (1/1.5 HP); Horizontal spindle (single): 7.5 kW (10 hp); Vertical spindles (single): 7.5 kW (10 hp) Speed (r/min): 6000 Spindle ø (mm): 35 Feed table length (mm): 1700 Working height (mm): 10 - 105 Suction nozzle ø (mm): 120
Contents Auction-ID: A1-50226-120
Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm
Fork Positioner & Sideshift Auction-ID: A1-41962-5
Suitable for model KRAMER 5040 W03 Auction-ID: A1-50849-187
An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible.
Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm | label width: 10-150mm | bottle diameter: customized | label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ? 1mm | max. speed of the machine in neutral: 150 cycles/minute | power: 220V/380V, 50Hz/60Hz, 750W | machine dimensions: L2400mm?W1500mm?H1400mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are po ...
Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XL version for large products, inclusive suitable shrink tunnel. Suitable for dust protection and transport purposes. Low cost packaging solution even for large products of up to W+H
Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XXL version for very large products, inclusive suitable shrink tunnel. Low cost packaging solution even for large products of up to W+H
New, 1.2T Lifting Capacity, Side Shifter/Fork Positioner, 1500mm Spoons Auction-ID: A3-46138-113
Key data: 6 , 190 mm, 120 mm
SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)
Key data: 4 , 180 mm, 105 mm
Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning
PART NUMBER: 7679 SPECIFICATIONS - max planing width 610mm - max planing height on both sides 200mm - electric top, up/down adjustment - max planing height on four sides 100mm –in advance: - Pulling insertion shaft, toothed - Flingers -Pressure - 2 pulling shafts, toothed -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - pulling shaft, smooth, outfeed – from below: - guide strip - pulling roller, toothed - planer shaft 610mm, 4-knife 5.5kW - 2 smooth, pulling shafts –behind: - 2 side spindles + clamp 1) Vertical right 100mm 4kW 2) Vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - Manual planing width setting - 6 types of feed speeds: 7/9/11.5/14/18/23m/min - feed motor 3.1kW - dimensions length/width/height 2500x1800x600mm - weight about 3000kg ADVANTAGES – ideal for processin ...
Stock number: P233, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Self-priming side channel pump, Connections: Ø 1½, Motor: Excl. motor - Max. 5,5 kW - 1400 rpm., Theoretical capacity: Max. 21000 l/h., Working pressure: Max. 3,6 bars, Manufacturer: Pompetravaini, Type: BT 501/3KO/A3, Other: The pump has not been used
Stock number: P229, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Side channel pump, Construction: Mounted on painted foundation with wheels, Motor: 0,75 kW - 220/380 Volt - 1400 rpm., Manufacturer: AHK, Type: 25-11/1, Other: With motor shield
Stock number: P197, In stock: Yes, Item: Side channel pump, Amount in stock: 1 pc., Motor: 3 kW, Manufacturer: Sterling SIHI, Type: ADHL
Stock number: P200, ,, ,, ., In stock: Yes, Amount in stock: 1 pc., Item: Side channel pump head, Manufacturer: Sterling SIHI, Other: Excl. motor
Auction-ID: A1-50373-80231
Auction-ID: A1-50373-8025
Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano
With box of blank cards. Auction-ID: A1-50667-75
Carriage suitable for Manitou, Hydraulic fork positioner, Adjustable to 1950mm Wide, Forks 1200mm Auction-ID: A3-46141-111
New, 1.2T Lifting Capacity, Side Shifter/Fork Positioner, 1500mm Spoons Auction-ID: A3-46141-112
Auction-ID: A1-40330-109
maximum number of results exceeded
please refine your search
15 € 
