130,748 used machines on RESALE, but how to find them? Machine Search
Mateng Dynamic 220 – rear and side mulcher (new machine built in 2025) General data • Machine type: rear / side mulcher • Manufacturer: Mateng • Model: Dynamic 220 • Year of construction: 2025 • Working width: 2,200 mm • Weight: approx. 832 kg • Condition: New machine Technical equipment • Suitable for tractors of approx. 80–120 hp • Tilt angle: approx. -50° to +90° • Hydraulic side shift • Displacement: left 672 mm / right 1,528 mm • PTO: 540 rpm • CMR gearbox with freewheel • 4 belt drive • Rotor electronically dynamically balanced • Rotor speed: approx. 2,047 rpm • Rotor Ø: 168 mm (with flail Ø 436 mm) • 24 mallets, staggered • Flail weight: approx. 1.37 kg • Hammer bolt M16 • Adjustable back-up roller Ø 168 mm • Two rows of counter blades for optimal shredding • Collision protection • Robust cons ...
Side channel pump, chemical pump, water pump, centrifugal pump ALLWEILER SOV 212 WG11T 12 motor: 1.5 kW 220 / 380 V EExe II (Roman. 2) explosion-proof ! used, tested !' IP54 Dimensions: 650 x 220 x 270 mm
Side broom Kärcher 6.903-380.0 Dimensions: 450 x 450 x 150 mm Weight: 1.7 kg
Single-stage side channel pump, oil pump, coolant pump LUKRA PUMPS, LUTZ KRACHT SS13 flow rate: 20 l/min motor : 0.25 kW 220 - 250 / 380 - 440 V IP 44 used, tested ! Dimensions: 210 x 150 x 230 mm
Side broom Kärcher 6.905-624.0 Dimensions: 450 x 450 x 150 mm Weight: 1 kg
Machine foot set with side orientation, wedge feet, levelling shoe PAGUS support height: 84 - 90 mm side orientation: 10 mm support surface: 170 x 110 mm weight: 14.25 kg 2 pieces each Dimensions: 260 x 165 x 125 mm
New cascade FEM 3 Side shift Auction-ID: A3-43528-294
Sell Fenwick S30W diesel sideloader, 3 Ton capacity, telescopic forks, maximum height 5.3 meters, 3021 hours, Up-to-date revisions. Video on Demand
Key data: 7 , 230 mm, 160 mm
SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)
Spoon length 1200mm Auction-ID: A1-46553-535
PART NUMBER 7474 Specifications: - max width of the workpiece 230mm - max height of the workpiece 160mm - number of spindles 5 1) Horizontal bottom 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) Vertical left 160mm 5.5kw 4) horizontal top 230mm, electrically adjustable up/down 7.5kW 5) Horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed insertion shafts, including 2 double shafts - 2 pulling lead shafts, rubber, single from below: - Pulling, metal, torsion toothed insertion shaft - Metal, smooth metal pulling outfeed shaft - pressure plate on the side - pneumatically adjustable rollers - length of the introductory table top 2020mm - central lubrication - Electric planing thickness adjustment from the control panel - smooth feed speed control 6-30m/ ...
PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...
Elmo G 200 Side Channel Compressor 8.5kW 2915rpm Unused Replacement Machine Weight approx. 180kg The cover on the engine at the rear is missing. unused replacement device. Was in stock, in case the first machine should fail. From insolvency
Heavy Duty Four-Sided Combined Calibration Milling Planer with Additional Scoring Saw for Relief Grooves Detailed technical description in the PDF document (as an attachment in the photo gallery).
This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.
Weinig Profiamt 22N four-sided planer Working width 230mmm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Rights 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed adjustable via variator 6-22m/min Feed motor 2.2kw Automatic worktop lubrication Worktop air cushion Length of the material insertion table 1970mm
Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system: 1. Bottom 7.5kw 2.Rights 3.Left 11kw 4.Top 7.5kw 5.Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed adjustable via inverter Feed drive on gimbals Input table length 1970mm CE Certified
Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor with reversing valve -Type: Elmo-G 2BH6 100-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Dimensions: 375/335/H385 mm -Weight: 30.7 kg
Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.
Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l
Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton
Very high-quality BMW R 75/5 motorcycle sidecar in classic black paint with white trim lines. The vehicle was fully restored between 2010 and 2012 and has only driven about 680 km since then. The restoration and conversion costs were over 26,000 € without the motorcycle. The vehicle comes with a complete Leitz folder with extensive documentation. The sidecar was built in 2012 as a new part, regularly accepted and registered. Visually, the combination presents itself in a very neat condition with a clean paintwork, neat chrome, wire wheels, classic boxer technology and a harmonious overall look. Equipment: · Registered sidecar · Sidecar with disc brake · Wire rims · Large lockable trunk in the sidecar · Comfortable sidecar seat with good legroom · Full restoration 2010–2012 · Extensive documentation folder · Classic BMW 2-cylinder boxer engine · Shaft drive · Black paint wi ...
Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton
used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h
Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991
Manufacturer: KDP Kantenanleimmaschine, Type: KDP 111 SL, Year: 1995, Min-max edge material mm: 0,5-2,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Lasertechnik: yes, Mitre stations: yes, Radius milling axis adjustment: no, Year :1995
maximum number of results exceeded
please refine your search
250 € 
