127,272 used machines on RESALE, but how to find them? Machine Search
PLC control, digital output -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 451-7LA11 -Number: 5 modules available -Price: per piece -Dimensions: 45/195/H300 mm -Weight: 0.9 kg
turning diameter over bed: 435 mm turning diameter over slide rest: . mm turning length: 750 mm turning speeds: U/min digital readout: digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm cutting range - square -: 120 x 120 mm cutting range - flat -: 300 x 40 mm capacity 45 degrees: round: 130 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 245 x 40 mm mitter cutting - all-position: 90 ° cutting speed: 13 / 25 m/min control: minipos 807 total power requirement: 4,3 kW weight of the machine ca.: 850 kg dimensions of machine L x W x H: 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm conveyor belt GF 4600-700-600 RA2243 Technical data: Conveyor length (NL): 4600 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4600 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spee ...
PLC control, digital input, digital input -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 430-7LA11 -Number: 4x modules available -Price: per piece -Dimensions: 45/195/H300 mm -Weight: 0.9 kg
Transformer, converter, inverter, three-phase autotransformer -Type: 4AV4074-1JA -Technical data: see images -Dimensions: 75/120/H130 mm -Weight: 1.1 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Input: 3 PH 380-460 V - 50/60 Hz -Output: 3 PH : 380/460 V -Number: 1x converter available -Weight: 4.1 kg
Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg
Transnorm conveyor belt GF 4700-700-600 RA2208 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s ...
Recon Part number: 002 180 34 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg
Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300 mm -Edge: 18 mm -Number: 11x available -Hole bottom left: 2/Hole bottom right: 9 -Price: per piece -Dimensions: 640/500/H300 mm -Weight: 5.1 kg
As good as new Part Numbers: 524 020 36 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Saw blade, wood saw blade, circular saw blade -Ø 420x3.5/2.8x60 -Z72 = T 18.32 -n max. 4300 -0211-5107670x HW -UFN- equipped -Price: per piece -Number: 3x available -Weight: 3.2 kg/piece
Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg
As good as new Part number: 524 020 37 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 420 mm -Depth: 180 mm -Edge: 18 mm -Drain: Ø 54 mm -Number: 2x available -Price: per piece -Dimensions: 460/H180 mm -Weight: 2.5 kg
Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece -Dimensions: 440/440/H300 mm -Weight: 3 kg
Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 200 mm -Edge: 19 mm -Drainage: Ø 64 mm -Number: 7x available -Price: per piece -Dimensions: 440/440/H200 mm -Weight: 2 kg
Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg
As good as new Part number: 524 020 38 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg
Hand washbasin, washbasin, weld-in basin, swivel basin -Stainless steel sink -Internal dimensions: 400 x 400 mm - Depth: 300mm -Edge: 18mm -Number: 20x available -Price per piece -Dimensions: 440/440/H300 mm -Weight: 3.9kg
As good as new Part number: 524 020 39 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Make CONDUX Type CS 450/600-2 Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg
Key data: 1120 mm, 345 mm, 400 mm
Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Socket: Ø 60 mm -Number: 1 cutter -Price: complete -Weight: 5.5 kg
Matsuura Horizontal Machining Center CNC control Matsuura G-tech 16i Pallet table size 500x500 mm Number of pallets: 6 Table load 400 kg Spindle speed 15000 rpm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.
Milling machining center CNC Hedelius Tiltenta T7-4200
Contacts, relays -Type: 4342310 -Number: 3x available -Price: per piece -Weight: 0.7 kg/piece
Contacts, relays -Type: 4333693 -Number: 2x available -Price: per piece -Weight: 0.7 kg/piece
Transformer, converter, inverter, three-phase autotransformer -Type: 4AV2600-2AB -Technical data: see photos -Dimensions: 160/140/H200 mm -Weight: 8 kg
automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg
PLC control -Type: Simatic S7 6ES7 138-4FA04-0AB0 -Number: 39x available -Price: per package -Weight: 0.3 kg
PLC control -Type: Simatic S7 6ES7 132-4BD02-0AA0 -Quantity: 5 available -Price: per package -Weight: 0.2 kg
PLC control -Type: Simatic S7 6ES7 138-4FB03-0AB0 -Number: 28 available -Price: per package -Weight: 0.3 kg
PLC control -Type: Simatic S7 6ES7 138-4CB11-0AB0 -Number: 12x available -Price per piece -Weight: 0.1kg
greates pass round over bed: 480 mm swing diameter over bed slide: 300 mm turning length: 1500 mm centre height: 240 mm centre distance: 1500 mm spindle bore: 42 mm spindle turning speed range: 14 - 1400 U/min total power requirement: kW weight of the machine ca.: 2,4 t dimensions of machine L x W x H: 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PLC control, Interbus-S -Type: S5 6ES5 491-0LB11 -Type: SINEC 6GK1143-0TA00 -Quantity: 2 available -Price: per package -Weight: 15 kg
Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x Workbench stand, used Material colour: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm Clear width: 2,300 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: - The images are used to illustrate the material. - The material color may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3-5 working days. You are also welcome to purcha ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extr ...
Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll height: 735 mm -Roll width: 400 mm -Dimensions: 420/430/H735 mm -Weight: 46 kg
Modular connection module -Type: CDM 420-0105 -Price: per piece -Number: 16x available -Weight: 0.9 kg
Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...
cutting width: max. 250 mm Cutting height: max. 80 mm Saw blade diameter: 400 mm Motor output: 3,0 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +-20 mm mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw -------------------------------------------------- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system t ...
Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw
maximum number of results exceeded
please refine your search
