4 side planing used for sale

bore capacity in steel (diameter): 40 mm throat: 330 mm bore stroke: 190 mm spindle taper MT: 4 MK table:: 500 x 400 mm column diameter: 140 mm turning speeds: 90 - 1500 U/min total power requirement: 2,2 kW weight of the machine ca.: 435 kg. range L-W-H: 570 x 930 x 2170 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring device for speed or frequency -Type: 0516 4750 -Dimensions: 420/320/H90 mm -Weight: 3 kg

T-slot plate, clamping plate with dovetail grooves, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Dimensions: 455/365/H40 mm mm -Bore: Ø mm -Dovetail groove: 17 mm -Weight: 45 kg

sheet width: 0400 mm coil outside dia.: 460 - 530 mm weight max. in kg: 2 x 2000 kg plate thickness: 0,40 - 3,00 mm coil outside - diam. ca.: 1500 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm speed: 0-40 m/min total power requirement: 15 kW weight of the machine ca.: 5,20 t dimensions of the machine ca.: m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm conveyor belt GF 4700-600-500 RA2120 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 40 mm -unused -Dimensions: 670/120/H120 mm -Weight: 11 kg

Key data: 400 mm, 150 mm, 22 kW

I am selling an industrial planer LEDINEK ROTOLES 400 D-S. Built in 2001. Max. working width 400mm Max. working height 2-150mm Min. element length 150mm Max. material take-off 8mm Rotating Shaft 48 Knife Feed speed 10-45 m/min. Motorized thickness adjustment with digital display. Diameter of the extraction hood 200 mm (30m/sec. required) Main spindle motor 22.0 KW. Feed motor 3.0 KW. Total power 26 KW. Total weight 1800kg. European product, manufactured in the EU, with CE certificate and instructions for use. Machine in stock in Kežmarok, Slovakia, possibility to test.

Bread Slicer Circular Knife Machine Wabäma Model: R 400 The all-rounder among bread slicers max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular knife machine with bread halving Counter and preset for number of discs with integrated drawer Circular knife made of high-quality Teflon special coating Machine mobile with brake Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 720 x 1110 mm, WxDxH Cleaning machine with 6 months warranty Many more TOP bread slicers in stock!

PLC control -Type: Simatic Simatic 6ES5 482-7LA11 -Number: 1x available -Price: per package -Weight: 0.9 kg

Stork Werkspoor TM 410 Cylinder heads 18 pcs available Withouth cracks or weldings water pressure tested 100% genuine, Original heads

Form 7 473 Band saw Cutting height max. 90° 270mm Cutting width max. without stop 465mm Saw blade length 3455mm Motor: 1.6KW 400/230V Suction nozzle 2x 100mm Weight: 160kg Exhibition Machine:

PLC control -Type: Simatic 6ES5 441-7LA11 -Number: 1x available -Price: per package -Weight: 0.9 kg

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Short taper mount: Ø 106 mm -Bolt circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 30 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1210 mm -Length: 4000 mm -Height: 830 mm -Sheet thickness: 30 mm -with steel frame -Number: 2x plates available -Price: per piece -Weight: 1400 kg/piece

Refrigeration unit Bitzer 4JE-15Y-40P for TK or Plus cooling Year of manufacture 2022, like new Displacement: 63.5m3/h 33 Kw cooling capacity at minus 10°C 13 KW at minus 30°C 11 kw./15 hp. Electrical power, Amp.30.8 Refrigerants 404a, 449a, 448a, 452a,134a etc.

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...

- Pallet feeder FP110 - MBO Navigator Control - 1. Station 4 buckles - 2. Station 960/6 buckles - 3. Station (Herzog Heymann) 52/4 buckles - Mobil Cross Fold Z2 - Mobile delivery S BAP 82 ME - Mobile delivery ASP 66-2ME

LCR_Meter developed by HP in collaboration with Yokogawa. Model 4285A

Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg

Safety switch, safety switch, safe lock -Safety switch series Ferrogard -Supply voltage: 250 VAC -Switching distance: 23 mm -Protection class: IP 67 -Number: 4x available -Price: per piece -Dimensions: 180/105/H95 mm -Weight: 0.5 kg

Sulzer ZAL 40S Cylinder heads complete Latest high output model without cracks or weldings water pressure tested

Transnorm Rising falling Incline belt conveyor GF 4900+4100-600-500 RA2193 Technical data: Conveyor length (NL): 9000 mm ( 4900 mm + 4100 mm ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 9000 ( 4900 + 4100 ) Nomin ...

TO WHOM IT MAY CONCERN ;

Clamping angle, clamping tower, clamping device, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 450/245/H365 mm -Wall thickness: 26 mm -Surface: milled -Holes for workpiece clamping: 18/22/25 mm -Quantity: 1x angle available -Weight: 56 kg

Feed technology, feed device, storage container with automatic feed, spiral conveyor, feeder-bowl -Automatic feeder without: storage container -Connection: 230 volts -Dimensions: 310/310/H260 mm -Weight: 31 kg

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4250 ( 8 ...

Transnorm conveyor belt GF 4350-700-600 RA2206 Technical data: Conveyor length (NL): 4350 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DT80K4/BMG/TH Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4350 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor spe ...

Transnorm conveyor belt GF 4800-700-600 RA2203 Technical data: Conveyor length (NL): 4800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s ...

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 430 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Dimensions: 95/95/H683 mm -Weight: 1.35 kg

B+S/Heino Ilsemann/Bosch/OCS/Pester Labelling & packing line for ampoules and vials comprising: Bausch + Ströbel ESA 1025 high output self-adhesive labelling machine suitable for ampoules/vials, object diameter up to 36 mm, object height up to 140 mm, output up to 370 1ml.-ampoules/vials per minute and up to 290 5ml.-ampoules/vials per minute direct transfer of the ampoules (vials are directly fed to the Bosch CAR T5 cartoner) to Heino Ilsemann BMP-400 blister machine for ampoules in blister without lidding foil, automatic feeding system for placing the ampoules into the blisters, max. drawing depth 35 mm, max. forming width 270 mm, max. usable punching area 250 x 180 mm, punching cycles max. 40 per minute, capacity up to 320 blister per minute Bosch CAR T5 horizontal cartoning machine, intermittent motion, carton size range from 20 x 16 x 60 mm (AxBxH) up to 95 x 70 x 200 mm (AxBxH ...

16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system

SCH 4532M Machine Incl packaging film New from 2021 Machine refurbished by the manufacturer

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 63 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Total length: 250 mm -Total length extended: 313 mm -Dimensions: 53/53/H250 mm -Weight: 1 kg

Identification system -Type: BIS F-403 -Voltage: 24 V DC -Dimensions: 130/175/H45 mm -Weight: 0.55 kg

Line filter, power line filter -Manufacturer: Bosch Rexroth -Type: NFD03.1-480-007 -Connection: AC 480 V -7A + 10% -Hz: 50-60 Hz -Number: 2x available -Price: per piece -Dimensions: 190/90/H50 mm -Weight: 0.76 kg

pressure: 320 t chamfer lenght: 4100 mm : 600 : 250 : 2900 mm Stroke: 265 mm throat: 400 mm distance between columns: 3750 mm dayligth: 550 mm table width: 60 mm oil volume: 600 l weight: 29.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm Rising falling Incline with forerun belt conveyor GF 4780+800-700-600 RA2103 Technical data: Conveyor length (NL): 5580 mm (800 mm forerun + 4780 mm incline ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5580 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...

PLC control, central assembly, work memory, CPU -Manufacturer: Siemens -Type: Simatic S7 6ES7 414-3XJ04-0AB0 -CPU: 414-3 -Dimensions: 210/50/H290 mm -Weight: 1.3 kg

PLC control, digital output, digital output -Manufacturer: SIEMENS -Type: Simatic S7 6ES7 422-1BL00-0AAO -Number: 1x module available -Price: per piece -Dimensions: 25/210/H290 mm -Weight: 0.82 kg

Weibert DB 460XL Vario Lathe Diameter max. 305mm Center Size x Height: 460 x 155mm Spindle head thread M33 x 3.5 MK2 3 speeds: 650-1430, 1240-2790, 1600-3800 rpm Electronically variable Rotating grain tip Four-pronged driver Swivel steel support 150mm, 300mm Clamping washer 145mm Quill adjustment: 55mm Motor 550W 230V 50Hz Dimensions (LxWxH): 900 x 340 x 410mm Net weight approx. 38kg G&STÜ-5920462

Replacement blades for cutting machines -Knife size: 127x25.4x1.1mm -Urschel: 46097 -Number: 33x available -Price: per piece -Weight: 25 g/piece

Replacement blades for cutting machines -Manufacturer: Stumabo -Blade size: 127x25.4x1.5 2GØ10.4 (90°) -Quantity: 25x available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 25 g

Lammers 16 BG 223-4MA66-Z 225M Electric motor 45 kW Manufacturer: Lammers Type: 16 BG 223-4MA66-Z 225M Nominal power : 45 kW Speed: 1475 rpm Voltage: 3 x 400/690 V Amps: 80 A Frequency: 50/60 Hertz Degree of protection: IP55 Weight: 315 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets, Robot.Made in Switzerland

Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets; Robot Made in Switzerland

number of heads: 4 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm voltage: 220/380 V frequency: 50 Hz Dimensions (L/W/H): 100x70x150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 3 kW -Speed: 940 rpm -Shaft: Ø 35 mm -Design: B3 -Protection rating: - -Dimensions: 440/350/H300 mm -Weight: 60 kg

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg