4 side moulder used for sale

Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars

Product number: 2650 Type: BR3000/400 Serial number: 1465 Year of construction: 2002 Belt width: 400 mm Frying length: 3000 mm Heating: electric, 66 kW Power: 3 x 400V, 50 Hz, 72kW Dimensions: 5400 x 1650 x 3150 mm Weight: 2450 kg Hold down belt, circulation pump, sediment removal, oil level control, manual hoists, prepared for CO² fire extinguisher

; Gross weight [kg]: 1215; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Engine: 4008TAG2A; Accessories: Product features:

Sell a draft fan R 400 / 51-895 with a Siemens motor 1CV3182A

Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Engine: 4006-23TAG3A; Accessories: Product features:

The year of build is 2018. The machine is shrink wrapped in a warehouse, so I cannot get to the meter reading. The last one I have is from 2022. We have not used it very much since that date…probably less than 3 rolls of paper. Color 337 B/W 669 Find more here - / Contact us at -

Height pliers, parallel pliers, height transfer gauge, height transfer measuring device -Manufacturer: Hommel Werke, height transfer theory -Type: 4626 DBP -Dimensions: 165/140/H430 mm -Weight: 7.6 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA52 DT71D-4BMG -Speed: 9.3 rpm -Power: 0.37 kW -Hollow shaft: Ø 40 x 120 mm -Protection class: IP54 -Brake: 5 Nm -Bearing block: THK HSP 30 -Dimensions: 520/260 / H285 mm -Weight: 36 kg

Asphalt paver Fortress Allat 450P. maximum width 3m. Two conveyors.

Label Printers Industrial Printers Thermal Transfer Direct Thermal Printers 1 x Honeywell Label Printer DMX-A-4212 New from Spare Stock 1 x Honeywell Label Printer DMX-A-6310 New from Spare Stock

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator, air damper actuator -Manufacturer: Siemens, servomotor -Type: SQN30.402A2730 -Dimension box: 155/115/85 mm -Weight: 0.7 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Martonair Type SM/040 400 -Stroke distance: 400 mm -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Dimensions: 690/112/H112 mm -Weight: 11.4 kg

Machine light, machine light, work area light, system light, compact light -Manufacturer: Rittal, LED system light SZ 4140.840 -Price: per piece -Numer: 3 pieces -Dimensions: 525/50/H30 mm -Weight: 0.4 kg/piece

x-travel: 400 mm y-travel: 450 mm z-travel: 35 mm Control: Heidenhein TNC 530 table weight: 200 Kg : Random 36 fach tool adaptor: HSK E40 turning speeds: 30.000 U/min total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand Eurotec Dimensions LxWxH (mm) Outside: 600 x 400 x 120 / Inside: 570 x 370 x 100 Weight (Kg) ca 1,86 each Number of pieces in stock 5202 Made in Germany Comments Used but good condition, ex-freeze usage

Clamping table, clamping angle, T-slot table, rotary table, milling machine table, turning table -Table area: approx. 1550 x 420 mm -Grooves: 5 piece 16 mm -Dimensions: see photo -Total dimensions: 1630/420/H180 mm -Weight 461 kg

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Metal band saw, band saw machine, vertical band saw -Passage width: 380 mm -Passage height: 230 mm -Table: swiveling -Speeds: 12 pieces min: 45 rpm max: 800 rpm -Dimensions: 1150/715/H1900 mm -Weight: 522 kg

Brand Allibert Year of manufacture: Used Dimensions LxWxH (mm) Outside: 400 x 300 x 350 (320) / Inside: 350 x 250 x 310 Weight (Kg) ca 1,70 each Number of pieces in stock 1232 Made in Belgium Comments PP PVC box incl. covers ( small amount little damages)

CAN SEAMER, SOMME MODEL: 434 Technical description: ? oval format Dimensions: 2500 ? 2200 ? 1900 mm

Adjustable traverse, crane traverse, traverse for pillar slewing crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Carrier dimensions: 360 x 150 mm (narrow I carrier) -Total dimensions: 4240/240/H630 mm -Own weight: 400 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 24 x 48 mm -Construction: B5 -Protection class: IP 44 -Number: 2x motors available -Price per piece -Dimensions: 350/270 / H250 mm -Weight: 20 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 2828 rpm -Shaft: Ø 32 x 80 mm -Construction: B5 -Dimensions: 450/330/H300 mm -Weight: 57 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Through hole: Ø 28 mm -Recording: approx M77 x 6 -Weight: 41 kg

Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes

Electric motor, three-phase motor -Manufacturer: Caenaho, electric motor from milling machine Stankoimport 6P / 2 -Type: 4A132S4Y3 -Power: 7.5 kW -Speed: 1450 rpm -Voltage: 220/380 V -Shaft: Ø 38 x 80 mm -Construction: B5 -Dimensions: 470/348 / H370 mm -Weight: 82 kg

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor Manufacturer: Siemens, air damper actuator -Type: SQN70.464A23 -Quantity: 2 pieces available - Price: per piece -Cardboard dimensions: 150/100/70 mm -Weight: 0.4 kg/piece

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

SEPARATOR, SEPAMATIC- type: SEPA-410 Technical description: Serial number: 107315 Power supply: 2,2 Kw, 400 V, 50 Hz, 6 A Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm). Dimensions: 900 x 1100 x 1600 mm

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor -Manufacturer: RS/Arcol power resistor HS300 47R J -Type: 136-323 47R J -Power: 300 W -Dimensions: 180/70/H40 mm -Weight: 0.6 kg

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Siemens: Sirius type 3RV1031-4DB10 -Current strength: 18 - 25 A. -Dimensions: 150/60/H160 mm -Weight: 1.1 kg

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Electric motor Flender ATB-Loher ANGA-315LB-42P 142/172 kW -unused - Electric motor Loher Flender - Model: ANGA-315LB-42P - 142 / 172 kW - 1480 / 2980 / min - 50 Hz - 1.21 t

Power supply, converter, converter, power supply unit, Smart-UPS -Manufacturer: APC Smart-UPS SC 420 -Voltage: 220-240 V/50/60 Hz/2.3 A -Accessories: VA bracket -Dimensions: 375/130/H175 mm -Weight: 9.1 kg

Wire electrode, welding wire, welding wire -Role started: MAG wire electrode -Type: 1.4370 Ø 1.0 mm -Dimensions roll: Ø 300/100 mm -Weight: 5.3 kg

SEPARATOR, SEPAMATIC, TYPE: SEPA 410 Technical description: Machine number: 107 306 Drum diameter: 90 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm). Power supply: 400 V, 50 Hz, 6 A, 2,2 kW Capacity: up to 800 kg per hour Dimensions: 1500 x 1200 x 2850 mm Includes pallet with additional drum with holes: 3 mm, and spare parts.

Metal band saw blade, band saw blade, metal saw band -Quality: unused, original packaging -Toothing: 3/4 K-POS -Price: per piece -Number: 6x sheets available -Dimensions: 3830x27x0.9 mm -Weight: 0.8 kg/piece

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine horizontal -Manufacturer: WMW, counter bearing from milling machine FW 400 x 1600 -Dimensions: see drawing in the photos -Transport dimensions: 1505/400/H345 mm -Weight: 370 kg

Wire electrode, welding wire, welding wire, flux-cored wire -Manufacturer: Krupp, shielding gas wire electrode CrNi 19 9 -Type: NOVONIT 4316 Ø 0.8 mm -Dimensions: Ø 300/100 mm -Total weight: 15.4 kg

Shrink tunnel BVM SC 4030 SD; good condition; cleaned and tested; new chains and sprockets in 2022; Passage width 400mm; Passage height 300mm; Speed max. 14m/min.; Double chamber. Shrink tunnel BVM SC 4030 SD; good condition; cleaned and checked; in 2022 new chain and chain wheels; working width 400mm; working hight 300mm; spedd up to 14m/min.; double unit.

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1370 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP55 -Dimensions: 245/138/H180 mm -Weight: 6.4 kg

Electronic cables, extension cables, electronic wires -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price/Sale: complete -Roll dimensions: Ø 500/330 mm -Weight: 20 kg

Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high pressure filter with contamination indicator -Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters -Price/sale: only complete -Dimension: 500/250/H160 mm -Weight: 20.8 kg

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 4200 kN injection volume: 1212 /292 cm³ screw diameter: 70 /15 mm platen size: 1200 x 1100 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic i ...

clamping force: 800 kN injection volume: 106 / 42 cm³ screw diameter: 30 / 22 mm platen size: 600 x 600 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for th ...