4 side moulder used for sale

TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004

WEINIG planer and moulder model Unimat 22 A Equipment: - Package - Lifting table (no pit required) - automatic stacking strip removal - Rubberized inclined conveyor - Rubberized separation - Longitudinal conveyor for planing.- Moulder - Unimat 22 A with soundproof cabin - 2nd operating unit - Manual acceptance Weinig Planer.- Automatic throat machine, technical data: Spindle arrangement: U - R - L - O - U Saw Working width: 220 mm Working height: 120 mm Motor power feed: 4 kW Motor power of the working spindles: 4 kW Speed of the working spindles: 6000 rpm. Diameter of the working spindles 40 mm Feed infinitely variable 6 - 32 m/min Diameter of feed rollers (hardened) 140 mm Space requirement line: 12.7 x 5.0 m Spelling mistakes and errors excepted

Facilities: - Aigner Integral Stop - Feed apparatus (3 rolls) - manual foot brake - Height adjustment by hand wheel - Aigner table extension

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options

BOTTENE – PASMEC moulding line for beads and planks, composed as follows: Automatic loader PASMEC, year 2005 : - PLC for work cycle programming - arm with suction cup system and vacuum pump - 1600mm useful stroke, brushless motor and prismatic guides - side aligners + pneumatic introducer pusher BOTTENE TARGET 606 moulder with 6 shafts, year 2017: – useful working measures 230x150mm – gimbal towing and differentiated pneumatic pressure – variable feed speed 6 – 60 mt/min with inverter – feed motor KW 7,5 – HP 10 – top feed wheel before the 1st shaft – group of tandem feed wheels in front of the 2nd shaft – overlapping feed wheels (top + bottom in the plane): at machine entrance, before the 1st shaft between the 4th and 5th tree at machine output, after the 6th shaft – short 1200mm entry plane – lubrication pump – protection cabin � ...

Capacity: in 180 x 130 mm., out 170 x 120 mm Feed speed: 6 to 28 m/min, 2,2 kW motor Cardan shaft drive Pneumatic pressures Spindles: 8 Bottom 5,5 kW, fence 5,5 kW, near 5,5 kW, fence 5,5 kW, top 11 kW, top 7,5 kW, bottom 5,5 kW, universal 5,5 kW Spindles 40 mm diameter Spindle speed: 6000 rpm Mechanical digital read-out Infeed table length: 2 m. Max. cut on 1st spindle: 10 mm. Min tool diameter: 100 mm, max tool diameter: 180 mm on first and universal spindle, 195 mm on vertical spindles, 200 mm on top spindles and 2nd bottom spindle Safety hood

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

With milling stop, fine stop, left/right run, 4000-7000 rpm

Vacuum pump

Planer and moulder Wadkin GA220 with 9 spindles Year of construction 1980 Maximum size of the approved wood 230 x 130 mm Maximum size of the finished wood 220 x 120 mm Configuration: 1. Spindle Bottom 2. Spindle Right 3. Spindle Links 4. Spindle Right 5. Spindle top 6. Spindle Bottom 7. Spindle Top 8. Spindle Bottom 9. Spindle Universal Most engines are 5.5kW and 7.5kW / 11.0kW Feed speeds variable 6- 36m/min Feed roller diameter 140mm Spindle diameter 40mm Spindle speed 6000 / 9000 opt. RPM Straightening table 2,0m max clamping removal 10mm technical information subject to reservation

Gubisch planer and moulder 172/7 S/N 3425 80 Year of construction 1980 Length of the dressing table 1950 mm Planing width maximum 170 mm Planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.Bottom dressing shaft 7.5 kW 2.Right joining shaft 3.0 kW 3.Left wave 4.0 kW 4.Right shaft 4.0 kW 5.Top Thickness shaft 4.0 kW 6.TopDickenhaft 5.5 kW 7.Uniwelle top / bottom 3.0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1.5 kW Feed speed infinitely variable 5 – 30 m/min. Weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical information subject to reservation

SPECIFICATIONS: Dimensions of the work table mm: 2,000 x 1,000 With hydraulic drive

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.

Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg

CNC milling machine ZX7124F table 900x230mm new/unused Description Was intended for project, but was never used. Private sale without warranty. Pick-up only: Mobile phone 015121271265 Table size 900 mm×230 mm T slot number spacing 3×14 mm The biggest hole diameter Ф20 mm End mill diameter Ф20 mm Spindle allowed maximum 150N.m Spindle speed 20~6000rpm The spindle taper BT30 The spindle end face to the 80~480 mm Spindle center distance to 300 mm The motor power 2.2KW Moving range (X, Y, Z) 500×280×400(mm) 12 Fast moving speed (X, Y, Z) 6000×6000×6000(m/min) Repeat positioning accuracy ±0.02 mm The feed motor power (X, Y, 4×4×7(N.m) Cooling pump motor power 0.09KW The power supply voltage 380V、50HZ The weight of the 1400 kg The environmental 0°C ~45°C

2-sided planing machine with slot bed: Year of construction 1993 Working width 170 mm Working height 120 mm Working height 4-sided 120 mm Number of spindles 4 Spindle arrangement u-o-u-o Diameter of the spindles 50 mm Spindle speed 6000 rpm Engine power 30-22-11-11 kW Feed speed 12-120 m/min Driven rollers in table 6 Automatic table lubrication Table height constant 840 Diameter of the suction nozzles 4x160 mm Weight 4500 kg Space requirement 4000x1700x1400 mm Voltage / Frequency 400V 50Hz 3Ph.

I sell a router for Koperfräsen Sicar, built in 1998. Milling head with motor Swivel + - 45° Spindle holder fi.10mm Electric motor: 1.9kW / 2800 rpm -> 18,000 rpm at the spindle 1.5 KW / 1400 rpm -> 9,000 rpm on the spindle Pneumatic connection the milling cycle, pedal operated. Made in Italy.

Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)

Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

MARTIN T26 swivel spindle milling machine very well maintained, in good facilities: Swivel angle: from +/-45.5 degrees, electrically adjustable according to LED display Digital dimension correction when the height is adjusted, the correction factor for the swivel angle is displayed in the upper display Height adjustment: stroke 150mm, electrically adjustable according to LED display Speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, Quick-change system: Dornfix quick-change spindle with torque wrench electr. Pneum. Spindle blocking Comfort stop with mechanical indicators for overall adjustment and inlet jaw individually T2600 CENTREX protection T2601 control panel can be swivelled above T2621 table extension with extendable workpiece support T2635 Swivel device for milling stop T2628 guide strips in anodized design Type 1376 tenon cutting  ...

Type 1B/1K-M length of workpiece. 5000 mm workpiece width. 300 mm Quontity of mortising: 180 mm working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 7500 Eur (EXW Jonava, Lithuania)

Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood 4 cutterblocks

WEINIG moulder model UNIMAT 17N with 8 shafts: -useful working measures 170x120mm -gimbal towing and pneumatic pressure -variable feed speed -top feed wheel before the 1st shaft -tandem feed groups in front of the 2nd and 4th shaft -2000mm long entrance plane -with SACOT automatic loader -manual lubrication pump of the table Tree layout: 1-under 2-right 3-left 4-right 5-above 6-under 7-above 8-Universal

SPECIFICATIONS: Passage mm: 230 Length entrance table mm: 2000 machining height mm: 120 Spindles: 6 Spindle configuration: 1 BOTTOM - CW 5.5 2 RIGHT - CW 5.5 3 LINKS - CW 5.5 4 TOP - CW 5.5 5 BOTTOM - CW 5.5 6 UNIVERSAL SPINDLE - WEEK 7.5 Spindle diameter mm: 40 Cardan shaft drive Feed speed: 6-36 m/min Revolutions per minute: 6,000 Soundproof cabin

TECHNICAL DATA: Vertical milling machine Tool shank diameter mm: 35 Dimensions of the work table mm: 2400 extendable in width 4 speeds, self-braking Installed capacity KW: 5,5

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

Universal machine for elongating wheat doughs, mixed wheat and rye doughs (30% and 70% rye), rye doughs without a rolling table. Technical data: Weight range: 200-2000 gr Machine capacity: up to 2500 pcs/hour at 1000 gr Rounding length: 560 mm Dimensions (L x W x H): 5520x1100x1500 mm Weight, net: 880 kg Connection value: 1.5 KW Advantages: Gentle elongation due to the correct choice of the length of the elongation path, 3-stage dough processing: rolling, rolling, shaping, Low dough fatigue, Modern design, Quick and easy maintenance of the machine, stainless steel housing, Feeding hopper with adjustable opening.

spindle tilting: yes-5 bis +45°; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: manual; read out height: digital; read out tilting: digital; read out fence: scala; spindle diameter: 30 mm; speeds: 1500, 3000, 4500, 6000, 9000, 12000 U / min; motor power: 5 / 6 kW; motor brake: yes, automatically; suction connection: 2 x 120 mm; machine length: 1200 mm; machine width: 1400 mm; weight: ca. 950 kg;

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manual; altitude display: digital; swivel angel display: digital; tilting fence display: Scala; spindle diameter: 30 mm; speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000; power consuption: 7,5 kW; motor brake: yes, automatic; suction connection: 2 x 120mm; machine length: 2400mm; maschine width: 1400mm; weight: 1100kg;

Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Brand: Martin Type: T25 M-No.: V 245411 Year of construction: 1997 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: eye level with digital display, stop position with digital display Spindle height 150 mm electromotive heights adjustment with digital readout Inclined position: -5° - +45° electromotive angle adjustment with digital readout Feed: 4 roll feed device Optional: Stop: Aigner Integral stop Milling protection cover: Aigner Centrex

Martin T25 swivel spindle cutter with 5 axis control Brand: Martin Type: T25 M-No.: V232232 Year of construction: 1996 Engine power: 7.5 / 9.5 kW or 10 / 13 HP, 2 speeds Dalander engine Swivel milling spindle: -5° - +45° Milling mandrel ø30 mm Spindle holder: ISO quick change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: NC control at eye level with LCD screen Spindle height NC-controlled electromotive angle adjustment (program controlled or manual operation) Inclination -5° - +45° NC-controlled electromotive spindle height adjustment (program controlled or manual operation) Stops: NC-controlled electromotive of the two stops adjustment to the milling mandrel (program controlled or manual operation) NC-controlled ele ...

Motor: 7.5/9.5kW, control panel at eye level, spindle ø30, table extension and spreadfront, console feed, feed jaw with digital readout Optional: Haffner 4 Roller Feeder

Brand: MARTIN Type: T90 with 7 spindles Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 240 mm (260 possible with ingekammerte planing heads) Planer thickness: 5 - 170 mm 1. Planer shaft dresser: Spahn removal max. 10 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 2&3. Spindle: Vertical callibrier planing and contour shafts, Spahn removal max. 10 mm, clamping length 160 mm, flight circle min. ø100 max ø125 mm, Z-4, 6.000 rpm, 7.5 KW 4. Thickness shaft/upper shaft: horizontal spindle tap removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 5. Top spindle 2nd profile shaft horizontal, Spahn removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 - max ø180 mm, 6.000 rpm, 7.5 KW, adju ...

Code: N0133 Brand: FIMAL Model: TX 160/L Spindle moulder with tilting shaft +/- 45° - motor hp 10 Optional: Automatic star delta starting Electric shaft height display Table extensions

Capacity: 230 x 130 mm. Spindles: 8 Bottom 7.5 kW, fence 7.5 kW, near 7.5 kW, 2nd fence 7.5 kW, 2nd near 7.5 kW, top 11 kW, bottom 7.5 kW universal 11 kW Grooved bed Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces Automatic bed lubrication Spindle diameter: 40 mm. Spindle speed 8000 r/min 5 driven feedrollers in table Feed: 6 - 36 m/min, motor 5,5 kW Automatic hopperfeed Tooling not included

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left

Paoloni TX 145L Table milling machine Table milling machine 45° swivel Digital Height adjustment digital Motor 5.5 KW 50 HZ 400V Table length 1.5m with roller B=1.2m Spindle 30mm Table opening 300mm Excerpt Built in 1995 Weight 560 kg G&-5039-M3W1R VAT not deductible!

SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools

Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools