4 side moulder used for sale

used vacuum thermoforming machine from Illig in very good condition little used immediately ready for use Dimensions 6 by 5 meters incl. control cabinet and corresponding phereperie devices Pictures to follow

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Dough weight min./max.: 80g/1000g, max. output: 1500 pieces/h, motor power: 0.55kW, loading height: 1360mm, output height: 850mm. Machine dimensions X/Y/Z: approx. 1010mm/850mm/690mm, weight: approx. 132kg. Overhauled: revised, new belts, new felt in infeed hopper and outfeed belt. Documentation available. On-site inspection is possible.

Table milling machine with 2 motors each 2 speed Research apparatus with 4 rollers

Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data Capacity: approx. 12,000 bottles/hour Formats: up to 3 L PET bottles Application: PET bottle production Configuration: Rotary stretch blow moulding machine, 6 cavities Neck finish: PCO 1881 Scope of Delivery Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds Preform feeding system  Chiller unit  Air conveyor system  Control system | Integrated HMI

Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute

Overview  This model USP-2 blow molding machine was manufactured by UROLA in 2002 and is designed for the production of PET bottles with a throughput of 800 bottles per hour for 5-liter bottles and 2,200 bottles per hour for 1-liter bottles. The machine has already been dismantled and stored and can be viewed by appointment. It supports the production of bottles in sizes from 250 ml to 5 liters. Technical details   Output: 800 bottles/hour (5-liter bottles) 2,200 bottles/hour (1 liter bottles) Formats: 250 ml to 5 liters Weight: 3,500 kg Condition: Already dismantled and stored Inspection: Possible by appointment

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

SCM T130 Low Spindle Milling Machine Spindle diameter 30mm Spindle length 140mm 4kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Longitudinal trolley in the worktop Net price

SCM T130 Low Spindle Milling Machine Spindle diameter 30mm Spindle length 140mm 4kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Longitudinal trolley in the worktop Net price

Excellent condition - Fully operational - Loading / Transport possible! Motor rating: 5 / 6 kW Rotational speeds: 3/4/5/ 6/ 8/ 10,000 rpm Spindle stroke : 150 mm The machine has the following optional accessories Digital display in the controller of the infeed fence jaw position Motorized fence positioning via the machine's electronic system Motorized table opening for tools with diameters from 70 mm up to 250 mm Motorized feed support Table extension ( 2400mm) with extensible workpiece support length 3000 mm, 700 mm extendable to the front Integral fence jaws swinging support for fence. The fence will be lifted via handwheel from the table Wegoma feeder Variomatic 4N, 4 rolls - feed speed 0,5 - 24 m/min

Excellent condition - Fully operational - Loading / Transport possible! Motor power: 7.50 KW 5 rotation speeds: 3000/4500/6000/7000/10000 rpm MK5 interchangeable spindle, spindle diameter 50 mm, spindle with reverse rotation, useful spindle length approx. 140 mm Table size 1200 x 730 mm with 2 lateral tables of dimensions 700 x 420 mm Maximum tool diameter under table approx. 320 mm FLEX fence with automatic movement Glazing bead unit, motor power 2.60 KW EASY TOUCH 7" mobile control panel With 4 rollers feeder SCM FEED 44

Excellent condition - Fully operational - Loading / Transport possible! Saw blade inner diameter 25 mm Saw blade diameter max. 200 mm, min. 180 mm Distance saw blade center to table 115 to 200 mm Saw blade thickness max 30 mm Cutting height with 200 mm saw blade 50 mm Suction nozzle diameter 80 mm Main motor 2.2 kW Table depth 730 mm Table length 1,200 mm Spindle speed 5,000

Cast iron table Lateral tenoning carriage Spindle diameter 50 mm. Table 110 x 90 cm Support rail in the front Motor 4 kW 5 spindle speeds: 2900 - 4400 - 6000 - 8000 - 10000 tr/min

Spindle moulder with fixed spindle, table with extensions Table length: 2,50 m. Support rail in the front Spindle diameter: 50 mm Motor 5,5 kW Spindle speed, manual adjustment, 4000/6000/8000 r/min

height of spindle adaptable: by hand spindle diameter: 35 mm motor: 3/4 kW

Milling spindle diameter: 50mm Useful span: 240mm Milling spindle speeds: 4400/6400/7000/9400 tr/min Motor: 7.5 kW Table dimensions: 1100 x 800mm Max milling diameter: 220mm Extension table: 200x1000mm + 200x2000mm Attachments: 2pcs 145x500mm Dust extraction diameter: 150mm

Spindle moulder with tilting spindle, table with extensions Table length: 2,50 m. Support rail in the front Spindle diameter: 35 mm Motor 5,5 kW Spindle speed, manual adjustment, 3000/4500/6000/7500/10000 r/min

Capacity: 230 x 130 mm. Number of shafts: 9 Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kW Kardan drive Pneumatic pushers Front surface table Feed rollers for short workpieces Manually operated pump for bed lubrication Shaft diameter: 50 mm. Powered rollers in the table Feed: 6 - 36 m/min Motorized height adjustment

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included

Capacity: 230 x 130 mm. Spindles: 7 Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kW spindles 2, 3, 4 and 5 are 8000 tr/min straight jointer on 2nd bottom spindle Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces 0,8 m infeed straightening table manual bed lubrication Spindle diameter: 50 mm. 5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kW motor height adjustment

Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood

Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed table In the machine 4 driven feedrollers Hardened table (with exception of the infeed table) Separate controll cabinet and electrical cabinet Automatic bed lubrication Pneumatic pressures Outfeed table with height adjustment 0/0,5/1 mm Sound enclosure with electromagnetic security Capacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm) Feedspeed: 6 - 36 m/min, motor 7,5 kW Number of spindles: 8 Spindle diameter: 50 mm Spindle speed: 6000 rpm Bottom 7,5 kW, outboard bearing Fence 7,5 kW Near 11 kW Fence 11 kW Top 15 kW, outboard bearing, straight jointer Bottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm) Top 11 kW, table prepared to take wooden inserts Bottom 11 kW, outboard bearing, straight jointer

Workpiece dimensions up to approx. 5 m. length, 250 mm width Sliding blocks for possible loading with singulator Transverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x 4 perpendicular stop rollers 4 non-driven feed rollers 1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/s Working height 70 cm Electrical cabinet not included

Spindle moulder manufactured in 2013. This PANHANS 245 features a robust table size of 1100 × 760 mm and a spindle height adjustment of 125 mm. It operates at spindle speeds of 3000, 4500, 6000, and 9000 rpm, making it suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the PANHANS 245 spindle moulder we have for sale. Contact us for further details.

Gomad FD-2 Low Spindle Milling Machine Spindle Diameter 25mm Spindle length 140mm Main motor 2 speed with a power of 5.9/4.4kw Replacement spindle Rotation speed change on the belt 3000/4500/6000/9000

Code: 0364 Brand: SAC Model: TS 110 Spindle moulder for milling and jointing operations on wood, plastics, composite materials, and various Technical specifications: Table dimensions mm 1100 x 900 Table height mm 860 Spindle diameter mm 40 Max applicable tool diameter mm 240 Spindle vertical stroke 2900-4500-6000-10000 rpm Motor power 5,5 Hp Overall dimensions mm 1100 x 900 x 1100 h Weight kg 780

TECHNICAL DATA: Width of inlet planer: 1970 mm Working width: 250 mm Working height: 150 mm Spinel: Ø 40 mm Number of Spindles: 5 Cardan shaft drive (2.2 kW) Speed: 6000 rpm Installed power: 22 kW Voltage: 380 V SPINDLE CONFIGURATION: I bottom (4 kW) II-III right-left (5.5 kW) IV above (4 kW) V bottom (4 kW) ACCESSORIES: Complete with tools Miscellaneous Accessories

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manual; altitude display: digital; swivel angel display: digital; tilting fence display: Scala; spindle diameter: 30 mm; speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000; power consuption: 7,5 kW; motor brake: yes, automatic; suction connection: 2 x 120mm; machine length: 2400mm; maschine width: 1400mm; weight: 1100kg;

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manuell; read out spindle height: digital; read out tilting: digital; read out fence: digital; spindle diameter: 30 mm; speed: 3000, 4500, 6000, 9000; power consuption: 5 / 6 kW; motor brake: Ja, automatisch; suction connection: 2 x 120mm; machine length: 2500mm; machine width: 1400mm; weight: 1100kg;

spindle tilting: yes 0 - 45°; height adjustment: manual; tilting adjustment: manual; fence adjustment: manual; read out height : -; read out tilting: Scala; read out fence: Scala; sawblade diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: yes, feed brake; suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg; schwere Produktionsfräsmaschine

Swivel spindle milling machine KÖLLE F45 with feed and integral stop very good condition, the machine comes from a small model making company and has been used only a little everything works perfectly all bearings and guides are OK, the machine has a very smooth running Year of construction 1992 on the milling fence a stop jaw can be adjusted in depth, with fine adjustment and scale, so that dressing work can also be carried out, e.g. on a gluing profile, the entire milling fence can also be completely adjusted in depth with an adjustment wheel and a threaded spindle, this allows very precise and fast adjustments, the milling depth can be read off on a digital display with spindle lock by lever the machine has the control panel at eye level with AIGNER integral stop the chips can be discharged very well, with 2 suction nozzles 125 and 100mm with 30mm spindle, which can be s ...

SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000 AND OTHER MACHINES

Robust swivel milling machine T 26 swivel from -45 to +45 degrees Swivel milling machine in very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed in the upper display, which is then adjusted at the stop, so that adjustments can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel fix quick-change spindle with torque wrench T226 comfort stop with digital displays for overall adjustment and infeed jaw individually, as well as input of the cutter diameter, whereby the cutting depth is automatically calculated Stop with lifting device can be swivelled away (for s ...

Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Excellent condition - Fully operational - Loading / Transport possible! Table dimensions 1255 x 900 mm, table height 900 mm, motor power 6 kW, speeds 3000/4500/6000/9000 rpm, tool holder SK 40, double-sided electromotive spindle adjustment, electromotive table opening switching 72/105/160/225/305 mm, spindle diameter 30 mm, integral fence AIGNER, extendable workpiece support, spindle height adjustment 150 mm, 4-roll-feed unit MAGGI STEFF 2044, 8 feed rates 4 to 66 m/min, Electromotive Integral Fence Adjustment, Double-sided Table Extensions 580 mm plus Swivelling Stop per Side.

- Maximum shaft rotation speed 2880 rpm. - Maximum peripheral velocity: 35 m/s. - Maximum length of the knife head 250 mm. - Wheel diameter 150 mm. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1700 x 1100 x 1900 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-46513-33

- Total installed power 27 KW. - Working width from up to 230 mm. - Working height from up to 130 mm. - Total length of the table 4280 mm. - Length of the entrance table 1950 mm. - 5 headers: down 4 KW - right 4 KW - left 4 KW - up 5.50 KW - universal 4 KW. - Axle diameter 40 mm. - Rotation speed of the shafts 6000 rpm. - Trolling motor 2.20 KW. - Variable feed speed from 5 m/min to 30 m/min. - The left head has electronic depth positioning. - The top and universal heads have electronic height positioning. - Control with digital viewfinder. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-46513-3

4 trees Auction-ID: A7-46472-12

Overview This rotary PET blow moulding machine was manufactured in 2003 by the German company Krones. The S8 model is designed for the production of high-quality PET bottles and adjusted for 1.5 L bottles and neck PCO1881. The machine remains in good operational condition, is immediately available, and can be integrated into existing production lines for beverages such as water, CSDs, or juices. Air conveying system is available. Technical data  Application: PET bottle production Capacity: 14,000 bph year of manufacture: 2003 Bottle Formats: 1.5 L  Neck Finish: PCO1881 center-cooling air conveying system available scope of supply: blow moulder Krones Contiform S8 (2003) cooling unit preform feeding preform container preform tilting device air conveying system available

Overview This stretch blow molding machine was manufactured in 2014 by Urola. The machine is designed for the production of PET containers with a 2-cavity mold configuration. Technical data  Capacity: Maximum 3,200 bph Formats: Maximum container dimensions 120 mm diameter × 350 mm height Application: Production of PET containers Configuration: 2 cavities Installed Power Preform rotation motor: 0.18 kW Clamping press motor: 7.5 kW Stretching motor: 3.0 kW Transfer arm motor: 1.3 kW Preform heating oven: 32.0 kW Preform feeder: 0.36 kW 24 VDC power supply (10 A): 1.0 kW Air reflector fan: 0.75 kW Neck cooling fan: 0.75 kW Lubrication pump: 0.07 kW Container evacuation: 0.09 kW Intermittent chain rotation: 0.18 kW Cooling Circuit Water inlet temperature: 10–20 °C Water consumption: 2 m³/h Operating pressure: 4 kg/cm² Cooling capacity: 10,000 kcal/h Pneumatic System – Low Pressure O ...

Code: 0294 Brand: SAC Model: TS 120/C Spindle moulder with sliding carriage for milling wood, plastics, composite materials, joinery, window frames and various Technical data: Steel base with cast iron table Table dimensions mm 1100 x 700 Sliding table dimensions mm 1100 x 260 Sliding table stroke 1060 mm Table height 850 mm Shaft diameter 35 mm Max tool diameter 330 mm Vertical spindle stroke 160 mm Spindle rotation speed rpm 2900/4000/5800/8000 Motor power 4 Hp Suction mouth diameter 120 mm Overall dimensions mm 1100 x 1000 x 1200 h Weight kg 580

Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  Capacity: 10,200 bph Working hours: ~50,000 h Formats: Neck finish: 29/21 (can be modified to 1881 or others) Preforms used: R-PET by Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Kosme linear oven 8 heating modules Kosme preform tipper with conveying system Kosme preforms feeding rail Kosme electrical cabinet Kosme Danfoss VLT drive Kosme touch screen control panel Set of spare parts (list on request) Service history: Kosme FBA maintenance Complete Kosme service in October 2024 Ongoing service by in-house technicians Scope of Delivery  Stret ...

Table milling machine fields type F 700 M Technical data: - Milling spindle swivel: 90 degrees / 45 degrees - Spare milling spindle: included

Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

40HC container with white side and rear doors Auction-ID: A1-45995-1

Viewing by appointment! Auction-ID: A1-40252-50

Equipped with 2 separately opening side doors and end door; lock case; unused Auction-ID: A1-40111-96