4 rolls bending used for sale

Description Seiger lathe SLZ 800E x 4000 Details Machine no. 4443 Year of construction 2008 Siemens Cycle Control Spindle holder according to DIN 55027 size 11 Spindle bore Ø 130 mm Spindle diameter in the front bearing 170 mm Spindle taper 1:20 Drive power 20/28 kW Main spindle speed switching stage "I" 9-1,800 min-1 Main spindle speed switching stage "II" 9-400 min-1 Maximum torque: 3,200 Nm Center width 4,000 mm Circulation Ø above the bed 810 mm Circulation Ø above the face slide 540 mm Bed width 480 mm Machine dimensions 2,000+center width x 2,750 x 2,000 mm Permissible workpiece masses between points without setting stick 2,000 kg Permissible workpiece masses between points with a setting stick 2,200 kg Permissible workpiece masses between tips with two setting sticks 2,500 kg Permissible workpiece masses flying i ...

Boring power: 35 mm turning speeds: max. 810 U/min core drilling diameter max.: 35 mm tool taper: Weldon 19,05 mm bore stroke: 210 mm weight: 11 kg connected load frequency: 230 V engine output: 1,6 kW Dimensions (LxWxH): 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2860x1120x1140 mm Weight: 1260 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3940x850x1350 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1500 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 4,450 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

Technical data for the mezzanine support: Manufacturer: Stow Included in delivery: 01x mezzanine support double-sided, used Surface: Ral 7001 silver-grey Cross-section: 150x150x6.0 mm S235 Base plates: 400x400x40 mm Length square tube: approx. 4,665 mm Length of square tube incl. base plate: approx. 4,705 mm Total height: approx. 4,750 mm Weight: approx. 180 kg | Pcs.

4000 x 2000mm 6000w

Dimensions (L/W/H): 800x600x500 mm Weight: 60 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x900x1700 mm Weight: 1900 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP

Dimensions (L/W/H): 2650x950x1850 mm Weight: 2100 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

Dimensions (L/W/H): 940x640x136 mm Weight: 96 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 300 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information

Dimensions (L/W/H): 800x500x2000 mm Weight: 180 kg Total power requirement: 2,57 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 750x2000x2000 mm Weight: 190 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1500

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Dimensions (L/W/H): 6300x1600x2600 mm Weight: 3000 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5200x1650x2250 mm Weight: 9000 kg Total power requirement: 45 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 570x870x1710 mm Weight: 143 kg Total power requirement: 1,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 7 Reference number: S 145 Condition: Used in good condition Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Dimensions (L/W/H): 5000x1150x2980 mm Weight: 665 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 820x410x810 mm Weight: 64 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3750x1400x1750 mm Weight: 1600 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

Available in stock 1 x Used Fuel Injector Nozzle Tester (400 bar). The equipment is used but in good working conditions.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...

Dimensions (L/W/H): 6300x1600x2600 mm Weight: 5000 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

Dimensions (L/W/H): 840x540x1980 mm Weight: 158 kg Total power requirement: 2,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut fig.: approx. 380 x 60 x 50 mm Mounting plate abm.: approx. 140 x 135 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

The BBT 400 Woodzilla is a 360° swivel, compact, Powerful, mobile drum chipper with aggressive feed, built on truck trailer chassis. Technical data Drive: Diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chopping drum: 400 x 500 mm, 4 knives Trunk diameter max.: 32 cm Length of feed table: 1300 mm Outrigger: 4-fold hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chippers and cranes Pendant towing eye: 40 mm Brake: Air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chippers and cranes The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.

Dimensions (L/W/H): 2000x750x2100 mm Weight: 250 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction approx. 2014 Greenline Version - Energy Saving (IE2) Conveying equipment temperature up to +120°C Multifunctional use, e.g. for kitchen exhaust air, industrial exhaust air Double-walled housing, soundproofed (50 mm rock wool – non-combustible, DIN 4102) Inspection door simplifies maintenance work Voltage/frequency: 400 V / 3 ph / 50 Hz Power: 3670 watts Current: 6.16 Amps Speed: 2890 1/min Protection class: IP 55 Motor protection: PTC (PTC) Max. conveying device temperature: +120°C Motor Type Efficiency/Adjustable: IE2 / FU Adjustable (Greenline) Max. volume flow: 7513 m3/h Motor outside air flow complies with DIN 18869-T1: yes Sound pressure level 4m: 53 dB(A) Insulation/Insulation Housing: Double-walled with 50 mm mineral wool (non-combustible) Housing material: galvanized sheet steel Outer Dimensions: 770 x 770 x 655 mm (L x D x H) Connecti ...

For sale: Cardboard Packer Meurer CM/TP 25-B 400. The machine worked in the Tetra Pak line. Carton type: 1000 ml Prisma on request, I will send a description of the machine and photos.

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

The scope of delivery includes: 01x Workbench,used System substructure dimensions: approx. 1,340 x 700 mm Height of top edge worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm consisting of EACH: 02 x Workbench stand, used Manufacturer: Dexion Type: P 90 Material colour: sendz. galvanized Profile dimensions: 100 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 900 mm high 700 mm deep 04 x Workbench trusses, used Shelving system: Dexion Type Speedlock P90 Material colour: sendz. galvanized Box profile: 89 x 50 mm Truss Type: SLO089|2 Clear width: 1,140 mm 08 x Dexion safety pin, used Type: Speedlock P90 Material colour: sendz. galvanized Ø Head: 13.58 mm Ø pin: 5.92 mm Weight / piece: 0,018 kg Particleboard, second choice, used Thickness: 38 mm Di ...

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433

For sale is a commercial kitchen with 4 pieces of Schneider cooking kettles in V2A double-walled heated with (24KW) with a 400 liters (together 1600 liters!) and an extraction system. as well as various accessories. such as e.g. Sandwich glass board etc. New price was just under 100,000€. It has been proven that the facility was used very little. Plant immediately available from site (lead time approx. 2 weeks for dismantling and delivery) For sale is a commercial kitchen with four double-walled, 24kW Schneider stainless steel cooking kettles, each with a 400-liter capacity (1600 liters total!), and an extraction system. Also included are various accessories such as a sandwich glass worktop, etc. The original price was nearly €100,000. The system has demonstrably seen very little use. The system is available immediately from the site (lead time approx. 2 weeks for dismantling and  ...

Planetary gear alpha, SP 140S-MF1-7-4G1-2S, I=7, Wittenstein, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - Shaft D32mm, - centering D130mm - Output side for shaft D24mm - I=7 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

TecHouse/Multigraf shed delivery tape 482.112; good condition; cleaned and tested; Length 1100mm; Width 340mm; sensor for automatic control; Speed adjustable; height adjustable. TecHouse/Multigraf stream delivery 482.112; good condition; cleaned and checked; Lenght 1100mm; width 340mm; sheet detection sensor for stop and go mode; adjustable in speed; adjustable in hight.

Engine Make PERKINS Engine Type 4016TA02 Power KW / kVa PRP 1766 / 2367 Fuel DIESEL Generator Model LEROY SOMER Volts 400 Hz 50 Year of Manufacturing 2000 Running Hours 292

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...