4 rolls bending used for sale

Used machine in good condition. Available for immediate delivery. - Table width L -R: 200 mm - Operating hours: pending - Pressure force: 400 t - Bending length: 6.000 mm - Axes: X-R-Z1-Z2-X - Working area: 0 mm - Distance between uprights: 5.050 mm - Working speed: 11 mm/seg - Returning speed: 120 mm/seg - Throat: 400 mm - Stroke max: 300 mm - Oil tank capacity: 500 l - Power: installed max: 42 kW - Weight: 37.000 kg - Dimensions (long x wide x high): 0 mm

Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons

Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

NARGESA MC 400 3-roll bending machine was built in 2015 in Spain by PRADA NARGESA, S.L. The machine, designed for precision machining of steel components, is an excellent choice for the production of, among others, gates, fences, railings and balustrades. The extremely rigid body is distinguished by the use of guide shafts and 3-axis rollers made of hardened steel, whose drive eliminates slippage during the rolling process. This solution, combined with independent, manual adjustment of the lower axes, increases overall ergonomics and productivity. The NARGESA tube and profile bending machine weighs 365 kg. Technical specifications of the NARGESA MC 400 tube and profile bending machine - number of rollers: 3 - roller diameter: 130 mm - roller rotation speed: 8 rpm - number of shafts: 2 - shaft diameter: 40 mm - shaft usable length: 80 mm - power: 1.5 kW - power supply: 3x 400 V ...

: ja positioning automatic: ja documentation: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 t, 30000 mm

The machine is in good technical condition, inspection and test drive is possible by prior arrangement.

I am selling this machine. It can be tested when connected. The machine is located in the Czech Republic. Very good condition. Price includes dismantling and loading. Rated deformation force 400 t Working area of table 3100 x 6000 mm Max. ram stroke 1000 mm Clearance between columns 3100 mm Output of main motor 15 kW Height of the machine 4170 mm Widht of the machine 4150 mm Lenght of the machine 6000 mm Weight of the machine 44190 kg

4roll plate bending machine 2500 X 12 mm with central support hydraulic for large diameters and side arm plate support Capacity plate width 2500 mm Plate thickness 12 mm Prebend 10 mm Upper roll 265 mm Lower rolls 245 mm Surface useful on rolls 2550 mm Power supply 380/50 Electric motor 15 Kw on hydraulic unit Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the rollers Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Central support vertical hydraulic operated for large diameters Side arm operated hydraulic support Total weight of the machine 7500 Kg Total weight of the machine 7500 Kg machine layout 4200X15 ...

Shaft Ø: 40 mm Bending Capacity: Flat bar upright at 500 mm Ø: 60 x 10 mm flat at 400 mm Ø: 100 x 15 mm square at 500 mm Ø: 35 mm L-iron leg outwards at 450 mm Ø: 50 x 50 x 6 mm L-iron leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-iron T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm electr. Connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 400 kg

This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine.

Power (ton) 15 Type of press brake servo press Stroke (mm) 500 Features mechanic clutch Table dimensions ( x-y/mm) 65 x 65

Key data: 2000 mm, 23 mm, 18 mm

4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

Key data: 3000 mm, 40 mm, 35 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE INITIAL PINCH Machine used in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven hydraulic powered on gear unit • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate fully round closed. • Variable speed working roll bending rotation hydraulic speed fast/slow.  ...

4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 27 mm : 27 mm : 18 mm : 23 mm : 20 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 € : 481.32 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

consisting of: frame shelf, loading magazine: 15-fold, max. loading length: 6,000 mm, automatic feeder, bending unit, power: 3.87 kVA, dead weight: 2,530 kg, with separate control unit, type: MBF372, switch/control cabinet system with cooling unit, Fabr. RITTAL

Cooling unit Bitzer 4P-10.2Y-40P with condenser condenser for TK or Plus cooling. For more information call 00436641838175 or Info@frigocom.at

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

MSE 470/10 Product no.: RE-HU-2014-0412-1 Attachment: Chamber filter press, drip sealing used Usage area: Chamber filter press Design: page Holm led Year of construction: 2002 Filter plate format: 470 x 470 mm Number of plates: 10 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.3 m ² Presses contents: approx. 48 dm3 Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available. There are two identical facilities are available.

Rexroth double valve 4WRKE 25

Keyboard for Maho machines Philips 432/9. Please note: Board and pot are not included in the offer; New

To check torque on air and electric screwdrivers.

System: Used decanter / centrifuge Manufacturer: Flottweg Model: full coat screw centrifuge Type: Z53-4/454 . No.: 007-135-03 B.: 1999 Drum: max speed. 3250 min-1 Drum inner diameter: 529 mm Drive motor drum: Lander Type: ANGA-225ME-04A Voltage: 400 V Service: 55kW, 105A, 1465 U/min Hyraulikaggregat: Loher 1450 RPM Buying and renting possible.

new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions inspection gantry safety lid CE-approved variable speed plc control overall dimensions (l x w x h) : 1.970 x 1.000 x 1.600 mm (open lid: H: 2.250 mm) Quick & Clean system Seals of mix axles easy and quickly disassembly and monolithic seals + Loader for eurobins

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

Veneer Vertical Slicer Manufactured by Angelo Cremona

Veneer Slicer, model TN 4000, manufactured by Angelo Cremona

Rexroth Controller 4WRKE27W3-500L3X/6EG24 MNR: R900972662 MNR: R900619277 for Krauss Maffei

Linear drive, stroke 420mm, DGPL-80-420-PPV-A-KF-B, 161797, Festo, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used and tested! The part was purchased from a spare parts warehouse of a company, was tested by us and checked for leaks. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions appl ...

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 4 pieces Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.100€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.500€ net plus VAT If you are interested, please contact us to confirm availability.

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV B7ssq0vkzj Year of construction : 2012 Condition : New with 1 year warranty Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.

Servomotor, 330V, 4000 rpm, B2.SM.000-4400, KEB, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Unfortunately, the packaging is not visually perfect on the outside., - Shaft D11mm, centring D60mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our  ...

AVK rotating frequency converter 50 to 60 Hz with AVK generator DKBN120K/490-12TS and AVK motor DKMBN 120L/400-10TS for sale used in working condition. You can also purchase only the generator or engine (on request). Frequency converter from 1986, complete with motor (50 Hz) and generator (60 Hz). Motor: 345 kW x 1,500 rpm, 400 V/50 Hz Generator: 400 kVA x 1,500 rpm, 380 V/60Hz Year of construction: 1986 Weight [kg]: 7.952 Dimensions LxWxH [cm]: 475x110x160 Generator AVK DKBN120K/490-12TS Manafacture: AVK Model No.: DKBN120K/490-12TS Type: air-cooled AC generator Serial Number: 5639822 Engine DKMBN 120L/400-10TS Manafacture: AVK Model No.: DKMBN 120L/400-10TS Type: AC motor Serial Number: 5639825

Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: 90° 12 mm -Drawing: in the photos -Length: 4200 mm (2 x 2100 mm) -Dimension: 20 x 75 mm -Weight: 44 kg

Description: Type : Oil transformer Finish : Hermetic Make : SGB Year of manufacture : 2016 Condition : New Rated Power : 4200 KVA Medium voltage : 22KV +- 2X 2.5% Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Type of cooling : ONAN Gross vehicle weight : 9030 kg Weight of oil : 1940 kg DIALA S4 ZX-I Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Doka steel prop. • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight • safe to use due to consistently high load capacity of at least 30 kN according to EN 1065 – • Easy height adjustment through hole numbering 35x columns Doka Eurex 20-300 top, used EUR 59,00 per piece 1x Doka stacking frame, galvanized, used, 1,55x0,85 EUR 105,00 per piece

Machine crossing with platform (bridge) 4570-880-2600 RA1996 Technical data: Manufacturer: In-house production Type: machine crossing with pedestal Condition: very good (used) Total size: 4570-880-2600 mm (WxDxH incl. handrail) step dimensions: 240 x 800 x 35 mm step/tread height: 200 mm platform dimensions: 850 x 800 mm Platform height: 1400 mm bottom edge 1600 top edge Steps: 8 (7 steps + platform on each side) Weight: 390 kg Next TÜV: 02.2023 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg

Bushing material, bushing material, bearing material -Inner diameter: 339 mm -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg

Metal band saw blade, band saw blade -unused: original packaging -Number: 6x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm

Mitteltrennschnitteinrichtung - 4th and 5th knife attachment for Trimmer Müller Martini 4th-5th knife Year 1999 - Serial-No. DSS 2609 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch für KUGLER-WOMAKO ProPunch 50-110 Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

MIG/MAG welding machine -Max. welding power: 400 A -Four-roller feed -Water-cooled -Hose package -with removable wire feeder -incl. ground cable -Gas valve