4 roll bending used for sale

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 8.3 rpm -Power: 0.25 kW -Diameter shaft: Ø 40 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 700/210/H300 mm -Weight: 41 kg

x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DC-445 creasing: Up to 15 creases per sheet 30 job programmable set up and storage Up to 50 A4 sheets per minute 110-350gsm nominal paper range 100mm feed pile height for unattended operation Suction feed to eliminate marking 0.1mm increments and ±0.3mm accuracy Step by step set up panel

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 12 rpm -Power: 0.25 kW -Hollow shaft diameter: Ø 25 mm -Design: Hollow shaft angle -Protection class: IP 44 -Brake -Dimensions: 450/195/H190 mm -Weight: 23.2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kgpc.

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Groove: mm -Height: 150 mm -Dimensions: 600/700/H150 mm -Weight: 147 kg

Diesel forklift hook, front forklift hook, gallows, forklift crane -Load capacity: 4000 kg -For: 600 mm sign -Mast height: 1620 mm -Length to hook: 1200 mm -Arm length: 1300 mm -Dimensions: 1300/1080/H1740 mm -Empty weight: 300 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 161 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 35 mm -Protection class: IP 55 -Number: 3x engines available -Price: per piece -Dimensions: 520/270/H300 mm -Weight: 45 kg

Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.3 rpm -Power: 0.55 kW -Diameter shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 690/285/H450 mm -Weight: 95 kg

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 108 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motor available Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: Monovolt PK 60 136-44585 -Number: 2x control cards available -Price: per piece -Dimensions: 40/170/H265 mm -Weight: 0.95 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1370 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 290/150/H190 mm -Weight: 10.3 kg

Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 1x package available -Weight complete: 15.6 kg

Siemens Vacuum Contactor 450 Kw Coil 230 Volt Used

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 140 x 40 mm Truss Type: TRV1-290-144-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,750 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the plac ...

Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 2x package available -Price: per package -Weight complete: 15.6 kg/package

Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg -Number: 1x package available -Price: per package -Weight complete: 15.6 kg/package

PLC control, digital output -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 451-7LA11 -Number: 5 modules available -Price: per piece -Dimensions: 45/195/H300 mm -Weight: 0.9 kg

PLC control, digital input, digital input -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 430-7LA11 -Number: 4x modules available -Price: per piece -Dimensions: 45/195/H300 mm -Weight: 0.9 kg

longitudinal travel: 1 mm cross travel: 1 mm table length: 1 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,5x0,8x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transformer, converter, inverter, three-phase autotransformer -Type: 4AV4074-1JA -Technical data: see images -Dimensions: 75/120/H130 mm -Weight: 1.1 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Input: 3 PH 380-460 V - 50/60 Hz -Output: 3 PH : 380/460 V -Number: 1x converter available -Weight: 4.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300 mm -Edge: 18 mm -Number: 11x available -Hole bottom left: 2/Hole bottom right: 9 -Price: per piece -Dimensions: 640/500/H300 mm -Weight: 5.1 kg

Saw blade, wood saw blade, circular saw blade -Ø 420x3.5/2.8x60 -Z72 = T 18.32 -n max. 4300 -0211-5107670x HW -UFN- equipped -Price: per piece -Number: 3x available -Weight: 3.2 kg/piece

Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 420 mm -Depth: 180 mm -Edge: 18 mm -Drain: Ø 54 mm -Number: 2x available -Price: per piece -Dimensions: 460/H180 mm -Weight: 2.5 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece -Dimensions: 440/440/H300 mm -Weight: 3 kg

Key data: 4 , 300 mm, 200 mm

I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !

ORMA disc gluing and screwing machine according to CE standards 4-roll gluing machine model I/413 with: - Working width 1300mm - Useful working height 100mm - double motorization, kw 0.75+0.75 - coating rollers D=250mm - dosing rollers D=180mm - with automatic brush washer Disc route with: - Useful working dimensions 3000x1300mm - Mechanical variable speed drive - with final photocells Year 2007, machines according to CE standards.

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 200 mm -Edge: 19 mm -Drainage: Ø 64 mm -Number: 7x available -Price: per piece -Dimensions: 440/440/H200 mm -Weight: 2 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Specifications: Maximum turning length 90 mm Circulation diameter over bed 220 mm Circulation diameter over support 110 mm Center width 160 mm Bore 23 mm 3 speeds 350 / 700 / 1400 rpm

Spine cutter HORIZON BQ 270 / 440 / 460 Art.: PS2821 Ersatzteil Nr. / parts No. 63643 (9822849) (M011440-03) Quality : Tungsten carbide Made in Germany Dimensions: 178 x 76.1 x 5/4 mm. Number of teeth: 40 (there is a variant for 52 teeth)

Hand washbasin, washbasin, weld-in basin, swivel basin -Stainless steel sink -Internal dimensions: 400 x 400 mm - Depth: 300mm -Edge: 18mm -Number: 20x available -Price per piece -Dimensions: 440/440/H300 mm -Weight: 3.9kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg

This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

Fully Automated 4 Clamps Perfect Binder With PUR Gluing Unit from SM Klebetechnick GX2311, AGE 2009, Serial No. 08103754, Book Size: Max. 320x320mm, Min. 145x105mm, Cover Size: Max. 320x660mm, Min. 135x225mm, Book Thickness: 0,3 to 65mm, Cover Weight Range: 81,4 - 302,4 g/sqm, Book Weight Range: 60 - 135 g/sqm, Cover Pile Height: Max. 150mm, Milling Depth Adjustment From 0 To 4mm, Speed: 1350 Cycles/Hour, 4 Creasing Positive/Negative, 2 Creasing, Palmar For Automatic Books Adjustment, Color Touchscreen Panel, Book Thickness Input Caliper SI-470A, Cover Feeder Suction, Supersonic Double Feed Detect Sensor, Glue Tank Unit, Lateral Side Glue, Horizon SI-470A Delivery Conveyor, Smoke Extractor , Power Required: 400V Rotary Current 16A, 6,5 KW For Adhesive Binder and 400V Rotary Current 16A, 6,0 KW For Melting Unit, Standard Accessories

Format: Untrimmed: Min. 85x128mm, Max. 320x480mm, Format: Trimmed: Min. 80x120mm, Max. 315x475mm, Product Thickness: Max. 12mm, Capacity: 14000 Cycles/hour, Colour Monitor Touch Screen Control For All Functions, Automatic Format Pre-Setting, Feeders: 1 Hand Feeder, Horizontal Signature Feeders: 6x DHU 450, Vertical Signature Feeders: 2x DVU 450, Cover Feeder CHU 450, Stiching Unit ST 450 with 2 Stiching Heads 45-N14, Thickness Control, Delivery To The Left, Reject Gate For Incomplete Products, Three Knife Trimmer TR 450, With Heidelberg CHA Automatic Compensation Stacker, Delivery To The Left, Machine Condition: Excellent, Machine Was Complete Overhauldt In 2019, After That Was Very Rare Used

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg