4 roll bending used for sale

Cutting width: 4 x 60 mm Year of construction: 2015 Productivity: approx. 35-40 Sheets (DIN A4, 70g/m²) Price: on request Security level: P3 Power supply: 380 V/ 2.2 kW Machine is fully functional, after technical supervision.

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Specifications Cutting width: 6 x 50 mm Year of construction: 2007-2009 Productivity: approx. 120 sheets (A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s Security level: P3 Power supply: 400 V/4 kW Machine is fully functional, after technical supervision.

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Clamping angle, clamping tower, clamping device, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 450/245/H365 mm -Wall thickness: 26 mm -Surface: milled -Holes for workpiece clamping: 18/22/25 mm -Quantity: 1x angle available -Weight: 56 kg

Feed technology, feed device, storage container with automatic feed, spiral conveyor, feeder-bowl -Automatic feeder without: storage container -Connection: 230 volts -Dimensions: 310/310/H260 mm -Weight: 31 kg

Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 430 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Dimensions: 95/95/H683 mm -Weight: 1.35 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 63 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Total length: 250 mm -Total length extended: 313 mm -Dimensions: 53/53/H250 mm -Weight: 1 kg

Identification system -Type: BIS F-403 -Voltage: 24 V DC -Dimensions: 130/175/H45 mm -Weight: 0.55 kg

Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)

Ref. -No.: 10369 Manufacturer: MONFORTS Year of construction: 2005 Type of control: CNC Control: MTCK/Euro Turn Storage location: Halberstadt X stroke: 450 mm Z - stroke: 3850 mm Centre Distance: 3970 mm Feed Capacity - Z: 20,7 kN Feed Capacity - X: 10,1 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Circumference diameter over slideway: 830 mm Circumferential diameter over radial slide: 540 mm spindle taper diameter: 140 (Metrisch) mm Quills Morse taper: MK6 Max swing diameter: 900 mm

Line filter, power line filter -Manufacturer: Bosch Rexroth -Type: NFD03.1-480-007 -Connection: AC 480 V -7A + 10% -Hz: 50-60 Hz -Number: 2x available -Price: per piece -Dimensions: 190/90/H50 mm -Weight: 0.76 kg

PLC control, central assembly, work memory, CPU -Manufacturer: Siemens -Type: Simatic S7 6ES7 414-3XJ04-0AB0 -CPU: 414-3 -Dimensions: 210/50/H290 mm -Weight: 1.3 kg

PLC control, digital output, digital output -Manufacturer: SIEMENS -Type: Simatic S7 6ES7 422-1BL00-0AAO -Number: 1x module available -Price: per piece -Dimensions: 25/210/H290 mm -Weight: 0.82 kg

Ref. -No.: 10319 Manufacturer: TAKANG Type of control: Digitalanzeige ACU-Rite Control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Weight Of The Machine Ca.: 1,3 t Swing diameter over bed: 430 mm Bed width: 300 mm Tip length: 1500 Centre Height: 215 mm Bed length: 1600 mm

Ref. -No.: 10313 Manufacturer: MONFORTS Year of construction: 2001 Type of control: CNC Control: EUROTURN Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 164 01 Machine length: 6200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 7,7 t X stroke: 450 mm Z - stroke: 3850 mm Chuck diameter: 315/400/500 mm Turning Diameter: 630 mm Turning Length: 3000 mm Centre Distance: 3985 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Space requirement: 7500 x 3500 mm Circumferential diameter over radial slide: 540 mm mm spindle taper diameter: 140 mm Jaw chuck diameter: 400 mm jaw continuity: 102 mm Quills Morse taper: 6 Max swing diameter: 830 mm travel of the cross slid ...

Replacement blades for cutting machines -Knife size: 127x25.4x1.1mm -Urschel: 46097 -Number: 33x available -Price: per piece -Weight: 25 g/piece

Replacement blades for cutting machines -Manufacturer: Stumabo -Blade size: 127x25.4x1.5 2GØ10.4 (90°) -Quantity: 25x available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 25 g

Ref. -No.: 10257 Manufacturer: HEIDENREICH & HARBECK Year of construction: 1981 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPM Machine length: 2.900 mm Machine width: 1.200 mm Machine Height: 1.800 mm Weight Of The Machine Ca.: 3,5 t Tool holder type: Multifix Typ B Turning Length: 1.000 mm Turning Diameter Over Bed: 480 mm Turning Diameter Over Slide Rest: 295 mm Bezel diameter (inside): 1 x 145, 1 x 255 mm

S. No.: 238828

BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control Panel AC 230V/115V/0.4A/0.8A Item Condition: Used H2R3C11_2_RD

Longitudinal direction ''X''. 4500 mm Transverse direction ''Y''. 3000 mm Spindle stroke ''Z'' 500 mm Astand Spindle Table 160 – 660 mm Table load 2000 kg/m²

SMO-4008-N QC12Y 8x4000 Hydraulic Press Brake Specifications - Maximum thickness of mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5 - Strokes/minute: 8 - Kickback distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total weight: 7300.0 kg Equipment - Backgauge driven by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade spacing adjustment - Ball transfer units built into the table - Task lighting - Front supports - Mobile footswitch Rear ramps The rear ramp has been equipped with ball transfer units, so that shutdowns are never left on the machine. E21S Controller (Located on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be saved - up to 25 different steps in each program - R ...

Three-phase motor, electric motor -Power: 3 kW -Speed: 940 rpm -Shaft: Ø 35 mm -Design: B3 -Protection rating: - -Dimensions: 440/350/H300 mm -Weight: 60 kg

Product number: 2809B Type: BR2000/400 Serial number: 555 Year of construction: 1987 Belt width: 400 mm Frying length: 2000 mm Frying time: 25 - 250 sec Heating: electric Power: 3 x 380V, 50Hz, 45kW Dimensions: 5000 x 1200 x 2750 mm Weight: 1150 kg Hold down belt, circulation pump, sediment removal, manual hoists, prepared for CO2 fire extinguisher With separate infeed conveyor

Turbocharger for MTU Engine 4000 Series Unused from stock. There are several Different Types

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg

Gear motor, electric motor, electric gear motor -Speed: 57 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 22 mm -Protection class: IP 54 -Quantity: 1x available -Dimensions: 455/155/H195 mm -Weight: 18.8 kg

Recon Part Number: SEV1X Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Double hydraulic pump, oil pump, gear pump Manufacturer: ATOS -Rotor pump type: PFED-43056/022/1DTO -Shaft diameter: 22 mm -Number: 4 pumps available - Price: per piece -Dimensions: 175/325/H195 mm -Weight: 28 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -Load capacity: kg -Tire size: 400 x 145 mm -Holding bore: 60 mm -Number: 3x wheels available -Price: per piece -Weight: 60 kg/piece

Gear motor, electric motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3/5 angle -Shaft diameter: Ø 12 mm -Protection class: IP 55 -Dimensions: 290/130/H170 mm -Weight: 5.7 kg

TYPE = MODEL RS 4004 900/400/C Web width = 500 ÷ 950 mm Print width max. = 925 mm Printing cylinders with a surface width of 1000 mm can be installed. Raport = 500 - 1020 mm Max. mech. Speed 400 m/min 2 x Unwinder Auto Splice max. ø 1000 mm 1 x Rewinder Auto Splice max. ø 1300 mm Printing Rotogravure, series 4004 With trolleys 10 normal for axleless cylinders 2 norma and current printing units for cylinders with axes. Axisless printing units with three-phase drives Dryer : Thermal oil

Geared motor, electric motor, electric geared motor -Speed: 116 rpm -Power: 0.25 kW -Diameter: Ø 16 mm -Design: B5 -Protection class: IP 54 -Number: 5x motors available Price: per piece -Dimensions: 340/180/H145 mm -Weight: 9.8 kg

Description Specifications More details Documents Interroll runway 1.65m with drive The Interroll runway element is in very good condition. Furthermore, the runway has its own drive motor Series: 5600 Width: 410mm Length: 1650mm Pitch: 75mm Loading capacity: 200kg per meter Drive voltage: 400Volt Complete closure of the plant, large selection of mezzanine floors, pallet racks, shelving racks, paternosters. High Quality Industrial Machines, Lathes, Grinding Machines, Hand Machines More items - new and used - can be found in our shop! International shipping costs on request!

Power: 900 kVA Cooling: Water with front-mounted cooler Speed: 1500 1/min Generator: Stamford HCI 634G1 Voltage: 400/231 V, 50 Hz Tank: approx. 1100 liters Subject to prior sale - errors possible Internal Reference Number: E-1004-65

Pester Pewo Pack 450 with shrink tunnel further information on request

Door holding magnet -Type: 425/24 -Liability: 70 CP -Number: 2x available -Price: per piece -Weight: 1 kg

Gear motor, electric motor, electric gear motor -Speed: 37 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: -Brake: 220 V -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H165 mm -Weight: 19 kg

Geared motor, electric motor, electric geared motor -Speed: 20 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -Design: B5 -Protection class: IP 33 -Brake: 220 V -Quantity: 1x motor available -Dimensions: 510/210/H220 mm -Weight: 27 kg

32 Sulzer TW11 130” narrow single colour and MW Serial 45000 to 69000 18 machine MW 14 machine single colour Accessories Per Loom 6 Harness shafts 6 Frames 6 Cam Heald wire, and dropper as one machine 1 Beam 1 Cloth role 1 IRO Looms are running and in very good condition

Qty. 1 Second-hand brew house Mfc.: Spomax, Zumec, Alfa Laval, Zieman, Bartec & others Built: 1996 – 2015 Capacity: 400 HL x 12 brews / Day

Qty. 1 Second-hand vertical fermentation tanks Mfc.: Holvrieka, Schmidding, Ellinghaus Built: 1991, 1996 Capacity: 24 x 1450 hl & 4 x 237 hl N° Name Producer Year Data Comments 1 Fermentation tanks Holvrieka 1991 1450 hl 2 tanks 2 Fermentation tanks Schmidding 1996 1450 hl 16 tanks 3 Fermentation tanks Ellinghaus 1991 1450 hl 6 tanks 4 Fermentation tanks Ellinghaus 1991 237 hl 4 tanks

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm -Weight: 14.4 kg

Key data: 1020 mm, 510 mm, 610 mm

Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change

ROTOCONTROL RSH 440 ECOLINE  Age: 2020 – like new! Configuration:  440mm Wide Label Slitter Rewinder  Maximum Web Width 440mm,  Unwind (710mm Max Diameter)  Dual 450mm Rewind,  Max Mechanical Speed: 300m/min,  Servo Driven,  Web Guide,  Splice Table,  Shear Slitting Unit.  45mm, 40mm & 76mm mandrels

Machine can be used as stretch bander with shrink tunnel and as full wrapping machine with side folding/sealing. • Output max. 22 packs/min., depending on the format • Straight infeed • Sealing width max. 440 mm • 2 infeeds: For cartons and bottles • Cartons, insertion length 60-360 mm, insertion width 60-200 mm, insertion height 30-165 mm • Bottles, insertion width/Ø max. 41 mm, insertion height max. 180 mm • Packing material PE/PP • Film width max. 345 mm • Format change approx. 15 min. • Stacking device • Shrink tunnel Skinettatherm with 2 blowers, 20-600°C • Outfeed conveyor after shrink tunnel 1,200 x 380 mm • PLC Siemens S7-300, touch screen Siemens Simatic TP27 • Drive 400V/50Hz

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Manufacturer: Sandvik Coromant R391.B03R-40F53 A -Socket: Ø 40 mm -Boring tool holder: 16 x 8 mm -Tool: Ø 435 mm -Weight: 6.1 kg

NILPETER FA4 – 430mm / 8-color FLEXO  Age: 2012  Max web width 420mm  Max print width 410mm  8x UV Flexo station  Unwinder  Rewinder  1x Rotary Die Cutting Section  1x Rotary Hot-Stamping Section  1x Cold Foil Station  1x Corona  1x turn bar  1x lamination station  Tool list