4 roll bending used for sale

Key data: 1600 , 600 , 500

Unisign Univers 4000 (UV 4000) Chassis CNC Vertical Machining Center Table size (2) 825 x 625 mm. Number of pallets: 2 Travel x-axis 1600 mm. Travel y-axis 600 mm. Travel z-axis 500 mm. 4. Axis (rotary table) NC Maximum table load 600 kg Number of tools in the magazine 51 pieces. Maximum spindle speed 12,000 rpm. Tool holder DIN 69871A CNC control Fanuc 21i MB If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a complete overview of our inventory.

Boring power: 35 mm turning speeds: max. 810 U/min core drilling diameter max.: 35 mm tool taper: Weldon 19,05 mm bore stroke: 210 mm weight: 11 kg connected load frequency: 230 V engine output: 1,6 kW Dimensions (LxWxH): 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 4,450 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Technical data for the mezzanine support: Manufacturer: Stow Included in delivery: 01x mezzanine support double-sided, used Surface: Ral 7001 silver-grey Cross-section: 150x150x6.0 mm S235 Base plates: 400x400x40 mm Length square tube: approx. 4,665 mm Length of square tube incl. base plate: approx. 4,705 mm Total height: approx. 4,750 mm Weight: approx. 180 kg | Pcs.

Horizon BQ4700 with Hotmeld glue in very good condition.yea 2008, 4 clamps

Key data: 4200 mm, 1090 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1090 g Clamping force: 4200 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection weight in polystyrene: 1090 g/hp Injection pressure: 1,877 bar Clamping force: 420 t Lights Tie bar spacing H x V: 810 x 710 mm Tool installation height - min.: 380 mm Opening distance: 710 mm Microprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 82.4 kW Total weight: 20,000 kg Total size: 7.9 x 2.3 x 2.5 m Payment terms: 100 % before taking over the machine, net only

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

4000 x 2000mm 6000w

Key data: 3200 mm, 287 , 50

Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only

Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information

Key data: 430 mm, 5200 mm

Band saw machine Bauer SA 430 ZA with accessories Year of construction 2009 Serial number 09-98002 Space requirements: Dimension L 3110 mm W: 2210 mm H 2400mm Total machine weight approx. 2,500 kg Electr. Connection 400V Motor power 4 KW Coolant pump yes Hydraulic pump yes Sawing area: 430mm Saw blade dimensions 5200 x 43 x 1.3 mm Cutting speed: Infinitely variable Saw blade guide: deflection rollers and carbide jaws Material tension: hydraulic Saw frame stroke: hydr. Cutting pressure control Material feed: manual, hydr, automatic pliers Accessories: roller belt, chip conveyor, express lowering, preselection of cutting pressure and force via touchscreen on the control panel, storage for cut parts, saw blades >5 pieces, SIGMA 5200x43x1.3 mm available Ready to use.

Key data: 1500

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060

- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP

Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 7 Reference number: S 145 Condition: Used in good condition Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Spiral conveyor from Apollo, infeed at approx. 6.42m / discharge at approx. 1.09m, approx. 40cm wide conveyor line – used -: Ex-site price (net): only 5.950.-€, dismantled, packed and loaded! Manufacturer: Apollo Type: SPC 1500-400-A4-6T Year of Make: 2016 Width of the conveyor belt: approx. 40cm Height of the point where the conveyor system enters above: approx. 6.42m Height at the sluice: approx. 1.09m Diameter spiral: approx. 2m SPC 1500-400-A4-6T Chain length (m) 37.5m Serial No. 562044-100 230/400V / 50 Hz, 2.2 kW Speed (at Min): 40m/ min IP54 Load 6.4kg/m Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

Available in stock 1 x Used Fuel Injector Nozzle Tester (400 bar). The equipment is used but in good working conditions.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

Reference ID: PP-55532 Category: Label Printer Manufacturer: Nilpeter Model: FA 4250 Year Built: 2007 Color: 8 Impression: - Working Hours: - Speed: - Max. Size: 420 mm Min. Size: - Condition: Good Location: Europe Availability: Immediately Machine Description: Working width: 420 mm Number of units: 8 8 UV colour stations + hot air drying on 8th station Installed new UV drying system – GEW E2C (year 2020) Servo driven Water cooling chill rollers Printing cylinders and anilox in sleeve version Unwinding (roll max. 1000 mm) Roll splicing table Corona Lengthwise waste cutting with waste removal Table for roll-sheet cutting Software for cold foil printing Winding with pressure roller (roll max. 1000 mm) Video monitoring camera Printing film 25–300 my Automatic register Included 10 anilox rollers Included 8 sleeve print cylinders (552.45 mm) Machine in  ...

; Gross weight [kg]: 944

Carl Zeiss Axiovert 40C Inverted Light Microscope The Carl Zeiss Axiovert 40C is a routine inverted microscope specifically designed for the study of living cells and cell cultures in biology and medicine. Due to the inverted design, the objectives are located below the stage, which allows observation in larger culture vessels such as petri dishes or microtiter plates. Technical features Optics: Equipped with the ICS system (Infinity Color-corrected System) from ZEISS for high optical performance in all contrast processes. Lighting: Equipped as standard with a 12V 35W halogen lamp for transmitted light; optionally, an HBO 50 mercury vapor lamp can be used for fluorescence applications (model CFL). Contrast Method: Supports brightfield, phase contrast, and PlasDIC. Camera connection: The Axiovert 40C model has an integrated photo port (C-mount adapter) on the front for di ...

AVIA FNE 40NC milling machine was built in 2001 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for precision machining of workpieces with a maximum weight of 400 kg. The machining process is performed in three axes by means of a reliable spindle with stepless speed adjustment. The spindle, mounted on a swivel workhead, moves in the Z axis on precision vertical guides. All this is complemented by the easy-to-use HEIDENHAIN NC control system, in which even the most advanced programmes can be created in just a few steps. The AVIA FNE toolroom milling machine weighs 1900 kg. Technical data of the AVIA FNE 40NC metal milling machine - NC controller: HEIDENHAIN TNC 310 - feed in the X/Y/Z axis: 620/420/400 mm - rapid traverse in the X/Y/Z axis: 6000/4000/4000 mm/min - feed rate adjustment: stepless - maximum workpiece weight: 400 kg - horizontal work table  ...

For sale: Cardboard Packer Meurer CM/TP 25-B 400. The machine worked in the Tetra Pak line. Carton type: 1000 ml Prisma on request, I will send a description of the machine and photos.

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

Dimensions (L/W/H): 1400x2450x2800 mm Total pressure: 400 to weight of the machine ca.: 12000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 280 kg Motor output: 4 kW : 4000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433

We offer Doka Eurex 30 top 450 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 450, used - 64,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...

Key data: 3 , 2000 kg, 2500 mm

Description, subject to prior sale Robot type: IGM RE 497-S in hanging Position Control: full digital PC-Robotcontrol, Type RCE Software: WIN 10 & Linux based System + igm Robot software K6 Welding process: 135 (GMAW), single-wire, Ø1.2 mm Welding power source: digital Invert Welding Power Source TPS 500i (500 A at 40% duty cycle) Robot periphery: Rotating boom for floor installation with 2.5 m boom length No. of Working-stations: 1 Working station: 3-axis L-Manipulator with lifting device with 2 tons nominal load capacity Security Technology: Pistol-Security-Shut-down in wrist axis Emergency Stop on Hand tablet, on Manipulators and Control Panel three-coloured warning light for the operating Status partition Security Door Technical indications, subject to error.

Planetary gear alpha, SP 140S-MF1-7-4G1-2S, I=7, Wittenstein, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - Shaft D32mm, - centering D130mm - Output side for shaft D24mm - I=7 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

TecHouse/Multigraf shed delivery tape 482.112; good condition; cleaned and tested; Length 1100mm; Width 340mm; sensor for automatic control; Speed adjustable; height adjustable. TecHouse/Multigraf stream delivery 482.112; good condition; cleaned and checked; Lenght 1100mm; width 340mm; sheet detection sensor for stop and go mode; adjustable in speed; adjustable in hight.

; Power [PS]: 61; Gross weight [kg]: 7500; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x375kW - DC socket:2x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x375kW; Water Tank Volume [l]: 650