135,983 used machines on RESALE, but how to find them? Machine Search
Weber ASB 400 skinner, cutting width 400mm, can be used (open) as combination machine with carriage table or (closed) with pressing unit and conveyor. You are very welcome to inspect the machine in 56070 Koblenz, Germany.
Built-in screwdriver with control, BL57/50 MDW, 457010, Pico/mA, DSM, used Top Attention special price! (For your info - current new price for this screwdriver and control € 9.500 excl. VAT) We have set the lowest price on the market for a comparable used part. We still have several identical and other such units, but the quantity is ending. If you buy more than 1 piece you will get a great discount. If you have a UID number we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Technical data: Screwdriver BL57/50 MDW, DSM 457010, max. 50Nm, incl. all cable sets. This high quality DSM screwdriver is designed for direct measurement of torque and angle of rotation. The high-precision transducers required for this are installed directly on the output. The meas ...
Maximum volume flow: 390 l Capacity approx.: 266 l Maximum pressure: 10 bar Tank: 50 l Cylinder/level: 2/1 Dasr7h9qg Speed: 1,360 min-1 Engine power: 2,2 kW 230 v weight: 57.5 kg Year 2011 Dimensions (Lxwxh) in mm: 870 x 400 x 700 G &-2974-O2386
Cooling water pump for MWM 348 and 484 on an exchange basis
The nominal gain kN 4000 Slide stroke, mm 400 Frequency Slider strokes min-1, 25 The frequency of single strokes, min-1 19 Slider travel to its lowest position, where the press develops the rated force, mm 8 The distance between table and slider in its lower position at the upper adjustment position, mm 470 Size of adjustment of distance between table and slider, mm 160 The size of the table, mm 1000x1000 The size of the slide from front to back, mm 800 Width of windows in racks mm 600 Main electric motor power, kW 37.0 Air flow, m3 / stroke 0,017 Press overall dimensions, mm left to right 3470 front to back 3140 Height above floor level, mm 5940 Weight without hydro pillow kg 32600
FOR SALE 3 SET ALFA LAVAL HEATPAC EHM 40kW TO WHOM IT MAY CONCERN; WE VE 3 PCS HEATER OF ALFA LAVAL HEATPAC EHM 40Kw AT OUR STOCK. NO. 0903-12987 MANUFACTURE YEAR 2005 DESIGN VOLTAGE 440V DESIGN TEMP. 160 C. DESIGN PRESSURE 1.5 MPa TEST PRESSURE 2.25 MPa MADE IN SWEEDEN WE VE ADDATIOANALY 2 SETS ALFA LAVAL HEATPAC EHM 72kW AT OUR STOCK IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services Info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY
Number of sanding units: 2 st. sanding width: 390 mm Sanding height max.: 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
all stainless steel electrically heated 127 kW frying length 5.000 mm belt width 400 mm adjustable speed oil level control oil circulation pump sediment removal system electrical hoists fire protection overall dimensions (l x w x h) : ± 8.300 x 2.000x 2.700 mm outfeed conveyor teflon-infeed
Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
RECON Part number: 1221 2179 / 6.441.0.150.900.7 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
used Foodwaste shredder with gearbox and engine 11 kw blades 18 mm 2 hooks
Koppens” contact cooker Type BG 6000/400 continuous teflon belt grill all stainless steel suitable for thermo oil heated with lower and upper belt - bottom and top grilling temperature of the belts is separately adjustable nett length 6000 mm belt width 400 mm adjustable speed product height electrically adjustable total length 8.500 mm total width 1.450 mm total height 2.250 mm (closed)
RECON Part number: 1217 0142 / 6.440.0.170.006.4 ---------------------------------------------------------------------- ---------- Note: We have various other RECON parts from different manufacturers and types available. We like to send you our current store reserves. For further questions we are gladly available!
GLUE SPREADER type OSAMA S2R 400 . NEW Year 2016 CE : YES Volt. 400 / 50 max. working width mm. 400 max. working height mm.100 n.02 rubber rollers
RECON Part number: 6.440.0.170.036.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work
The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.
RECON Part number: 1217 4397 / 6.441.0.170.057.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
TFT replacement monitor for MAHO machines with Philips control CNC 432 2 year warranty!; New
The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min. ...
RECON Teilenummmer: 1217 4401 / 6.441.0.170.067.4 B side ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU
RECON Part number: 1217 4412 / 6.441.0.170.018.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Panda WV 4500 B Suction plugs: 4100 m3/h Vacuum: Pre-pump output Gewawting capacity: 12 months Status: as good as new, reserve device; ready for use
RECON Part number: 1217 4413 / 6.441.0.170.019.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...
The machines of the CD25 series are compact high-pressure cleaners from 170 to 500 bar and a volume flow of 17 to 42 l/min. The pump is powered by a 3-cylinder, water-cooled Kubota diesel engine. The sturdy frame is made of stainless steel for long durability and corrosion resistance. The powder coating ensures the very beautiful appearance. The machine has very compact dimensions of 1200mm x 800mm. This corresponds to the same size as the well-known EURO pallet. The frame is fixed on 4 large rubber feet. The high-pressure machine is also equipped with forklift pockets and a central lifting eyelet. This allows for very easy transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500 ...
Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new
Built in: 2004 Rebuilt: 2017 Equipment: stitching unit for Ferag UniDrum; working condition
Busch two-stage pump level: Data Pump status: Type: BNV 1000 A Vacuum: 0.005 mbar (abs.) data Pre-pump: Type: NC0400B Suction volume: 400m3/h End pressure: 0.05mbar (abs.) Data Booster: Type: WV1000B Suction power: 1000m3/h End pressure: 0.005mbar (abs.) Condition: tested, maintained (good condition) Including: vacuum pre-filter, oil filling Performance: 3 months; ready for use
Price per piece! Included in delivery are: 01x pallet rack traverse, used Material color: gray Box profile: 140 x 50 mm Agraffe: 5 HK (hook) Clear width: 1,400 mm load per pair of trusses 4,000 kg at the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 350/400 General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. B2xwaxdlj8 Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf in ...
FOR SALE ...COMPLETE T/C NAPIER NA 457 AT TURKEY; HAVE A GDY SIR WE VE COMPLETE T/C NAPIER NA 457 AT STOCK. PLS FIND SPEC AT BELOW NA 457 701276 4FM157F 225 FJ 19500 650C. IF YOU HAVE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Kind Regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
Price per piece! Currently in stock: approx. 51 pcs. Included in delivery are: 01x pallet rack traverse, used Material color: gray Box profile: 110 x 50 mm Agraffe: 5 HK (hook) Clear width: 1,400 mm load per pair of trusses 3,000 kg at the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 350/400 General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed S ...
Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away
Unused charging equipment for electric forklifts 48 Volt 120 A Processor-controlled BAE Duo loader with electrolytum woe Price on request More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please ask. Special price Varta Hawker Migatronik Still Linde Wagner
From checkweigher to filling scale The 1-head scale is the most cost-effective solution for partially automating manual filling. With a reproducible accuracy, the filling speed can be significantly increased. Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 1 • Volume weighing container: 4.5 liters • Bunker volume: 20 liters • Weighing range infinitely adjustable between 20 and 1,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 15 weighings per minute, depending on product, adjustme ...
FOR SALE NEW UNUSED 4 PCS ALFA LAVAL HEAT PAC EHM 40KW TO WHOM IT MAY CONCERN ; WE VE 4 PCS-NEW UNUSED ALFA LAVAL HEATPAC EHM 40KW AT OUR STOCK. HEATPAC IS 440V YOB 2013 PLS FIND SPECT AT PICTURES IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
Weighing with maximum flexibility The larger counterpart to the 1-head scale is suitable for faster manual filling, as well as for small automations. Application: Dose free-flowing products in accurate quantities. Suitable for manual filling and automation Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 2 • Volume weighing container: 4.5 liters • Bunker volume: 35 liters • Weighing range infinitely adjustable between 50 and 3,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 30 w ...
Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder o pallet feeder (MBO) o MC control 1st folding unit: o 4 buckle plates o rear-mounted slitter shafts o noise prevention 2nd folding unit: o 4 buckle plates o rear-mounted slitter shafts o noise prevention 3rd folding unit: o 2 buckle plates o rear-mounted slitter shafts o noise prevention delivery: o belt delivery ; working condition
maximum number of results exceeded
please refine your search
