126,698 used machines on RESALE, but how to find them? Machine Search
This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm
; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container
0: - Beutel/min 0: - mm 0: - mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 762 mm, 460 mm, 460 mm
Vertical machining center Okuma MB-46UAE Year of Make: 2004 Control OSP U100M Machinery ▪ Spindle – speed 8000 rpm. ▪ High-speed machining (Hi-Cut) ▪ Spindle load monitor (load monitoring) ▪ Thread milling (Herical-Cut) ▪ Workpiece zero points 50 pieces ▪ 200 Tool Corrections ▪ Manuals available (documentation) ▪ Tool changer with 32 positions ▪ Internal coolant supply Technical details ▪ Travel X-axis (column right-left): 762 mm ▪ Travel Z-axis: (table forward-backward): 460 mm ▪ Y-axis travel (spindle up-down): 460 mm ▪ Distance table surface to spindle nose: 150~610 mm Table ▪ Table size: 1000 x 460 mm ▪ Distance from the floor to the table surface: 800 mm ▪ Max. load capacity: 700 kg Spindle ▪ Spindle speed: 8,000 rpm ▪ Number of gears: infinitely variable ▪ Front bearing diameter: 70 mm ▪ Spindle: 11/7.5 kW ...
Siemens Simodrive 6SC6600-4GA00 outdated 462600.9060.00, 6sc66004ga00 Central Assembly Shipping with parcel shipping.
Leutenegger (Starrag) washing box Specifications Year of construction: 2000 Bathroom capacity: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply line: 40 A Control voltage: 24 V DC Temperature max: 50° C Electric heating Heating capacity: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3/h Shipping costs on request
Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
; Power [PS]: 2039; Gross weight [kg]: 20560; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000
Specifications: - working width 4050 mm - max. cutting capacity St 40 6 mm - Cutting gap adjustment - Stroke rate depending on cutting length approx. 20 - 25 per min - Backgauge with positioning control ELGO 10 - 750 mm - Cutting length adjustment - Hydraulic hold-downs - front angle stop - front support arms can be moved laterally - Drive 400 V / 15 kW - Foot switch - Space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - Weight approx. 10800 kg
For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.
2x Bilz FAEBI 430 + 2x Wedge Shoes - Rubber Air Springs / Machine Feet - 2x wedge shoes + base - 2x Bilz FAEBI 430 rubber air springs + substructure - 9x spacers - By adjusting the air pressure, the deflection behavior can be adjusted - Wear-resistant, low-maintenance air damping, easily adjustable from the outside - No transmission of structure-borne noise Specifications FAEBI 430 Rubber Air Spring: - Load: 2750 - 6500 daN - Max. pressure: 6 bar - Cushion height: approx. 90 mm - Cushion diameter: 480 mm - Support diameter: 315 mm - Dimensions incl. substructure LxWxH: 510 x 510 x 200 mm - Threaded rod: M20 / 180 mm Wedge shoes: - Dimensions incl. substructure LxWxH: 330 x 250 x 200 mm Spacers: - Diameter: 470 mm - Thickness: 2x 4 mm / 2x 2 mm / 2 x 1.5 mm / 3x 1 mm
Key data: 1600 , 600 , 500
Unisign Univers 4000 (UV 4000) Chassis CNC Vertical Machining Center Table size (2) 825 x 625 mm. Number of pallets: 2 Travel x-axis 1600 mm. Travel y-axis 600 mm. Travel z-axis 500 mm. 4. Axis (rotary table) NC Maximum table load 600 kg Number of tools in the magazine 51 pieces. Maximum spindle speed 12,000 rpm. Tool holder DIN 69871A CNC control Fanuc 21i MB If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a complete overview of our inventory.
; Gross weight [kg]: 2300; Engine: C9.3B; Accessories: Tanker, Battery, Control Panel, Including battery charger and coolant heater
new
Boring power: 35 mm turning speeds: max. 810 U/min core drilling diameter max.: 35 mm tool taper: Weldon 19,05 mm bore stroke: 210 mm weight: 11 kg connected load frequency: 230 V engine output: 1,6 kW Dimensions (LxWxH): 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 2849; Engine: Caterpillar C9.3B; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 721
; Gross weight [kg]: 4667; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 842
; Gross weight [kg]: 3754; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : Caterpillar PL444 cellular radio system; Water Tank Volume [l]: 721
; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 4,450 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm
Horizon BQ4700 with Hotmeld glue in very good condition.yea 2008, 4 clamps
CNC lathe GILDEMEISTER CTX 420 linear With Siemens 840 D powerline controller Year of Make: 2006 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circumferential diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations Y axis , C axis Tool measuring device Parts collection facility 3 jaw chuck hydraulic 0 210 mm with foot switch Hydraulic Collet Chuck Hainbuch IRCO Breuning RBK 10012 Bar Feeder Signal lamp Tailstock with quill Conveyor Oil mist extraction Coolant system with IKZ and belt filter system Operating instructions
Technical data for the mezzanine support: Manufacturer: Stow Included in delivery: 01x mezzanine support double-sided, used Surface: Ral 7001 silver-grey Cross-section: 150x150x6.0 mm S235 Base plates: 400x400x40 mm Length square tube: approx. 4,665 mm Length of square tube incl. base plate: approx. 4,705 mm Total height: approx. 4,750 mm Weight: approx. 180 kg | Pcs.
YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC
Used Grasso FKS PP 450/S water cooled chiller on Ammonia (R717). Complete with 1 Grasso HR-H36S-28 screw compressor, 2EC IE4-0DP-250M2 electric motor - 50 Hz - 110 kW - 2970 RPM, brazed heat exchanger as evaporator, brazed heat exchanger as condenser, Grasso oil separator with a volume of 275 liter, oil cooler, oil pump and a control cabinet with a Siemens Simatic HMI controller. Capacity based on a cold water inlet/outlet of 12°C/6°C and a cooling water temperatures of 27°C/32°C. Specifications: Brand: Grasso Type: FKS PP 450/S Product type: Water cooled chiller Capacity kW: 445,0 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Capacity tons: 126,5 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Refrigerant: R717 Weight in kg: 5200 Sizes: 3400x1900x2400 mm (LxWxH) Compressors: Grasso HMR-H36S-28 ...
Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information
; Gross weight [kg]: 13000; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500
; Gross weight [kg]: 746; Engine: Perkins 403D-15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 22100; Engine: Perkins 4016-TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000
; Gross weight [kg]: 7970; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450
Key data: 1500
2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.
; Gross weight [kg]: 16780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000
; Gross weight [kg]: 9780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000
; Gross weight [kg]: 10500; Engine: 4012-46TAG3A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000
; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450
- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP
Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 7 Reference number: S 145 Condition: Used in good condition Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
; Gross weight [kg]: 8950; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1360
used
HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm
Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
Available in stock 1 x Used Fuel Injector Nozzle Tester (400 bar). The equipment is used but in good working conditions.
dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...
SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine
maximum number of results exceeded
please refine your search
