4 axis used for sale

Bitzer Tandem Type 44DC-10.2Y, with 2 pcs compressor 4DC-5.2Y, With control box and collector

Stanko Ø 400 mm

The robot is new and has never been used, accessories included. Here is the summary of the most important technical specifications of the IXP-4N4515 from the datasheet: Loblybdsxfl Sme N Isah Axis configuration: 4-axis SCARA robot Arm length: 450 mm Vertical axis (Z-stroke): 150 mm Axis working range: Axis 1: ±127° Axis 2: ±127° Vertical axis: 150 mm stroke Rotation axis: ±360° (±0.02° accuracy) Positioning repeatability: ±0.03 mm (XY axes) Velocities: Axis 1+2 (XY): up to 2438 mm/s Z-axis: up to 270 mm/s Axis of rotation: up to 1000 °/s Payload: Nominal load: 1 kg Maximum: 3 kg With large gripper: up to 1.5 kg Particularities: The vertical axis has no brake, but holds the load even when "servo OFF". No thrust movements possible via Z-axis (max. compressive force 60 N). Control: MSEL-PGX compatible

SUMAB R 400 Für Blöcke, Bordsteine, Pflastersteine Produktionsfläche: 1100x500mm Palettengröße: 1200x550 mm Maximale Produkthöhe: 330 mm Mindestprodukthöhe: 40 mm Produktionskapazität in 8 Stunden / 100 %: Hohlblock: 6.912 Stück (20x20x40 cm) Pflasterstein: 550-640 m2 (10x20x6 cm) SUMAB R 400 For blocks, curbstones, pavers Production area: 1100x500mm Pallet size: 1200x550 mm Maximum product height: 330 mm Minimum product height: 40 mm Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm)

AIR LIQUIDE CB MATIC SM 42X43 column and boom was manufactured in 2016 in France by Air Liquide Welding (now Lincoln Electric). The machine, designed for precision circumferential and longitudinal welding, is the perfect solution for companies specialising in the manufacture of, among others, steel structures, pipelines, tanks and wind turbine towers. The welding process is performed fully automatically by means of a welding heads system, which enables the welding of two welds simultaneously on tubes with a maximum diameter of 4000 mm and I-beams with maximum dimensions of 3000 x 800 mm. The use of this solution significantly reduces production time, while maintaining high precision and efficiency at the same time. The CB MATIC SM 42X43 welding boom on offer has a tube welding head for submerged arc welding (SAW) with a range of safety systems, i.e. laser pointers, sensors and a visio ...

KOTEC PSD-4520 CNC drilling machine was built in 2020 in South Korea by KOTEC Co., Ltd. The machine, which is designed for drilling precision holes and threading, is an excellent choice for companies specialising in, among others, the construction of machinery or the production of steel structures. The machining process is performed in three axes (X,Y,Z) on a large work area with a length of 4500 mm and a width of 2000 mm. A number of state-of-the-art components, combined with an extremely stable design, guarantee the best results, even during the most intensive machining. All this is complemented by an advanced CNC control with an intuitive interface and all the necessary functions. The KOTEC PSD 4520 CNC beam drilling machine weighs approximately 8900 kg. Technical specifications of the KOTEC PSD-4520 CNC metal drilling machine - number of axes: 3 (X,Y,Z) - feed in the X/Y axis: 4 ...

Earth auger 450 mm for Jasen HBG-2000

This line is an automatic filling line for bottles with Ø 38 mm wide mouth neck including aseptic filler, filling height control unit, labeling, foil shrinking, handle applicator and conveyor system used in the PET bottling for still and cold products like milk or juice.

Earth auger 450 mm for Jasen HBG-2000

New brush machine K2L-400+ with manual stroke control. The stroke of both spindles simultaneously with the adjustment of the individual spindles to each other. Suitable solution for rapid material height changes. Technical parameters Working width 400mm 2 working heads 2 x3 kW Feed speed 2-12 m/min. Suitable for brushes with a diameter of 250mm, L 400mm, d40mm. The machine is in stock and can be picked up immediately.

Toyota, Forklift Diesel BJ 2018 Toyota 40-8FD40N , 4.5 to / 4500 kg Payload 1.Hand, bought from us New, available now just look at it on site Full view duplex mast 4000mm, with lateral shift and fork positioner, Manufacturer Meyer, forks/tine length 1200mm approx. 11,500 BH / operating hours, 408FD40N10563 Year of manufacture 2018 Comfort cab, heating Mini lever for quick and easy operation, Switch on the left of the steering column for changing direction of travel On-board computer including load weight display Comfortable Grammer seat wide fenders and 300mm wide pneumatic tires also suitable Price VHB Diesel forklift type 40-8FD40N with SAS system for active stability Basic load capacity 4500 kg Load center 500 mm Mast type full clearance duplex Lifting height approx. 4000 mm Overall height approx. 2990 mm Free ...

DH Robotics PGHL-400-80 Heavy Duty Large Stroke Electric Parallel Gripper with Brake Gripping force (per jaw): 140-400N Stroke: 80mm Recommended workpiece weight: 8kg Open/close times: 1.0s/1.1s Repeatability (position): ± 0.02mm Weight: 2.2kg Driving Style: Precise Planetary Gearbox + T-Shaped Lead Screw + Rack and Pinion Size: 194mm x 73mm x 70mm Communication interface: Standard: Modbus RTU (RS485), digital I/O. Optional: TCP/IP, USB2.0, CAN2.0A, PROFINET, EtherCAT. Running noise: < 60dB Rated Voltage: 24V DC ± 10% Rated Current: 1.0A Peak Current: 3.0A IP Class: IP40 Recommended environment: 0~40°C, below 85% relative humidity New

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Specifications Cutting width: 3.8x50 mm Power supply: 400 V Year of construction: 1991 Price: on request the security level: P2

Number Of Colours: 8 // Printing Width: 430 mm

Core diam.: 230 mm // Material Type: Cardboard, pvc, pp , pe and hdpe cores

Operating hours: 600h Specifications: Travel in X/Y/Z: 450 / 350 / 400 mm Distance from spindle nose table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Working feed X/Y/Z: 10 - 2000 mm/min infinitely variable Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (rigid angle table) Max. table load: 30 kg (rigid angle table) Vertical milling head: Speed range: 10 - 5000 1/min Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2270kg Equipment: - Swivel control panel - Shafts and gears hardened and ground - Digital display Sinumerik 828D - Clockwise / counterclockwise rotation of the main spindle - Linear guides - Four-bearing milling spindle radial/axial - All pinch points eliminated by covers - Main motor with spindle brake

PART NUMBER 7794 SPECIFICATIONS - inlet width 530mm - inlet height 200mm - shaft diameter 370mm - shaft width 510mm - knife length 510mm - number of knives 2pcs - autorever – adjustable - sieve dimensions 50x50mm - Bottom geared pulling shaft 1.5kW - Toothed pulling shaft from above 1.5kW - main motor power 30kW - vibroline loading table / vibroline length 3900mm - vibroline width 500mm 1.5kW - Receiving conveyor belt length 5000mm - tape width 380mm - hopper with chute for sprues 2500x3020x2200mm - Platform 4650x750x1770mm - Dimensions of the machine with conveyor belt and vibroline length/width/height 8900x1200x2550mm - weight about 6000kg ADVANTAGES – adjustable autorever – with vibroline 3900mm – with conveyor belt 5000mm – German production – very good condition – used chipper Net price: 98900 PLN Net price: 23548 EUR depending on the pr ...

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

- Stainless steel structure - Belt length: 4000 mm - Belt width: 300 mm - With 4 feet - Without electrical control box

The cross-welding stamp of the packaging machine is closed by a servo motor and is infinitely variable. The width of the infeed belt is infinitely adjustable via a hand crank, which allows perfect, simple and uncomplicated adjustment of the product width. The parameters are entered via a modern, easy-to-use touch screen. The flow length is controlled photoelectrically, so that different package lengths can be packed one after the other and one after the other. The machine is technically designed for very tight, perfect shrink-wrapping of the products, so that optimal packaging results are achieved in any case. The machine works with an automatic film feeder, it is possible to work with different transport speeds. Longitudinal and transverse welding are permanently heated and easy to control via the touch screen. Product Dimensions: Length: min. 50 mm, max. endless Width: min.  ...

Manufacturer: Genkinger Model No.: 44141627 Year of manufacture: 2023 Number of pieces: 4 pieces Condition: unused / mint condition Original price per unit: 90.000 € net Application: Internal transport on flat, paved road Overall size: approx. 16000 × 3000 × 3800 mm Loading area: 2× each 7200 × 2700 mm, height 2600 mm Loading height: approx. 1050 mm Payload: 15 t at 20 km/h with a uniform surface load Note: Point or strip loads are only permissible after consultation Covering: Loading area over the entire surface with screen printing plate Chassis: both axles steered Tyres: Super-Elastik 300-15, approx. 811 × 255 mm Wheel bearings: tapered roller bearings, permanent grease lubrication Suspension: Steel leaf springs Wheel chock: double-acting Steering: 4-wheel kingpin steering Drawbar: elevatable, removable, reversible front/rear Suspension height: appro ...

Parker fuel filter HOCP 44840-B

Engine + compressor AEG 60Hz / 440V / 222KW / 37,5A

MANN Filter Part number: CF 400/1

MANN Filter, for engige 28/32 Part number: C 16 400

Dear's Sale, used 1 engine MAK 452 COVER Brgds Hakan KUSCU +905323642509

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:

Closed metal energy chain, S1250.171-RM-300-St-4000, Kabelschlepp, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part comes from a spare parts warehouse at a manufacturing plant, has never been used, is new and has only very minor signs of storage. Metal energy chain, energy guide, S1250.171-RM-300-St-4000, cable carrier, as good as new, Closed, heavy-duty design Includes 2 connecting parts Total length measured approx. 4300 mm, outer width 195 mm, web width 171 mm, 32 links, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for dire ...

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

9 Colors Age : 2007 Complete rail system Unwinder 1 meter roll diameter Splice detector Web breaking detectors Teknek cleaning system Corona Antistatic system Ink Pumps ; 1 Knife cutting unit : 3 knifes 6 printheads with IST UV units 9 Sensotec control register system Rotary diecut ( K1B Gap Master) AVT inspection system Rewinder compatible between both presses, need to choose Cold Foil Unit ( Unwinder+Rewinder) compatible between both presses Cold Foil pressure cilinder : 2 Cold foil small cilinder : 2 Screen Printhead Gen I : 2 available for both presses, need to choose Screen Printhead Gen II : 2 available for both presses, need to choose Screen Printhead Gen III : 2 available for both presses, need to choose Mounting Device : 2 available for both presses, need to choose More ink chamber : 2 available for both presses, need to choose

Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Inlet size: 400 x 250 mm - With electrical motor

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm

module: Diameter: mm boring diameter: mm Sprocket cutter DIN3968 Parting 65 RO36 R1 EK 20° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.

Size: 400 x 1.540 x 110 mm - 9 Rolls

Axial fan, W4D450-DO14-02, 0,5KW, 400V, Ebm-papst, new -40% Please note: Original Ziehl Abegg product and not a replica from ……. Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, have never been used and are completely new. Flange size 577 x 577 mm D 450 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

; Gross weight [kg]: 520; Engine: Yanmar 4TNV88-22G; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 60

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

completely stainless steel Turn right-left double-walled (suitable for heating and cooling) Front emptying 2 motor: 2 x 3kW Safety cover Dimensions (L x W x H) : ± 1,500 x 1,200 x 1,700 mm + "Berief" Mobile feeding for 200L standard wagons

Key data: 1000 , 89 , 30

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...

Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm

Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm

Rated current (A): 4000, Poles: 4; Gross weight [kg]: 99; Accessories: Multiple breakers in stock!, NEW/UNUSED

; Gross weight [kg]: 4879; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 842

-The machine is fully automated as a working process. Automatic filling with lifting device for standard carts type Laska 200 liters. The entire receiving hopper is automatically tilted by means of hydraulics and the mixture is unloaded in seconds. -With the help of the 2 Z-shaped augers, the highest quality and gentle mixing is carried out, especially important for achieving the structure of the minced meat! The machine is optionally equipped with a vacuum and a vacuum pump! Completely factory refurbished with delivery installation samples and training and 1 year warranty.

; Gross weight [kg]: 11000; Accessories: 40FT HC used Genset Container , ex FG Wilson P1650-E3, Inside dimensions: 8820x2200x2600 )LxWxH in mm)

3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014