4 axis used for sale

Control: Heidenhain Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine

Control: Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine has spindl

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha

Control: iTNC 530 Max.travel range: X 850 mm Y 700 mm Z 500 mm A +/- 115? C nx 360? Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 38+44 positon Coolant tank: 900l machine has spindle cooling, Erowa clamping system is available, measu

Rotary axis drive, drive, limit switch -Manufacturer: Telemecanique -Type: ZCE01 -Quantity: 5 available Price: per piece -Minimum order quantity: complete -Weight: 0.05 kg

Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.

CMA 5-axis painting robot mod. ROBY 5EX-R - used - N. 5 controlled axes - N. 3 supports - Wrist capacity 3 kg - Self-learning programming -Merry-go-round Number of arms 3 Single arm capacity 25 kg - Workpiece Wheel Servo movement controlled and synchronized - Complete with manual and CE declaration - RETROFIT 2024 (NEW OVERHAUL)

Salvagnini Mod. Performer Year 2000 Manual loading Manual blades

ADIGE BLM LT652 Model : LT652/B Year of Manufacture : 2002 Laser Generator: DC025 (2500 Watts) Loading Length : 6500 Drain Length : 4500 Hours of Electrical Panel : 60433 Tension Laser Ore : 62285 Chiller : recently replaced Disassembly options - available now.

Axis control, VT-HNC100-1-14/133, Rexroth, used-function assurance Attention: This is an original product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production company, - is in very good condition and fully functional, Ensuring function In order to ensure functionality, the buyer must inspect or put the goods into operation when taking them over. In the event of a defect that is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer a maximum of the product price paid to us. For these goods, we have to exclude warranty claims by the buyer for improvement, replacement, subsequent delivery or even for updating in the case of digital components. Liability for direct and indirect consequential damage is  ...

Manufacturer: CMS Model: Avant-1/B-560-TX3/RR with a digital table Year of Manufacture: 2006 Type of Machine: 4-axis CNC machining center with a moving bridge - Moving bridge design with two racks. Fixed table during machining. - Welded steel support frame stabilized by double heat treatment - Mobile bridge supporting a set of two crossed slide carriages for transverse and vertical movement - Travels: o X axis: 5600mm o Y axis: 2050 mm o Z axis: 300 mm - Working and positioning speed: o X axis from 0 to 60 m/min, positioning speed of 60m/min o Y axis from 0 to 100 m/min, positioning speed of 100m/min o Z axis from 0 to 30 m/min, positioning speed of 30m/min - Automatic centralized lubrication - TX3 vertical head with tool changer mounted on Z-TX3/12/L vertical carriage o Head power: 15kw at 18000 rpm o Programmable rotation speed of 1800 to 24000 rpm o HSK63E cone - 2 ...

FARO Model 21000 Measuring Arm - Portable 3D Measuring Device/Scanner For sale is a professional FARO measuring arm model 21000. The system is suitable for precise 3D measurement tasks in quality assurance, toolmaking, manufacturing and reverse engineering. The FARO measuring arm enables fast and accurate tactile measurements directly on the component. Thanks to its mobile design, the device can be used flexibly in workshop and production environments. Note: The sale is without software. Technical data • Manufacturer: FARO • Model: 21000 • Part Number: 25000-225 • Revision: 3.0 • Serial number: W25-C5-18-16257 • Date of manufacture: 24/01/2018 • Last calibration: 08.06.2021 • Origin: Made in U.S.A. • Certifications: TÜV SÜD, CE, UL/CSA 61010-1 compliant Connections • Ethernet (RJ45) • USB • AUX interface • Electricity connecti ...

Equipped with digital control aes and vacuum table complete with unwinding tables aes size approximately 230 x 340 cm

KNOLL coolant system and chip conveyor, toolchanger positions: 240, rapid traverse (X/Y/Z): 60 m/min., max. tool length: 350 mm, max. tool diameter: 160 mm, max. tool weight: 12 kg, max. workpiece diameter: 720 mm, max. workpiece height: 1000 mm

Jaw width: 125 mm Reference: CES - Lot 39 Weight: approx. 60kg

CNC dividing head and tailstock brand Walter with jaw chuck Röhm and jaws See pictures Viewing desired by appointment

Tool changer with 30 tool positions

CNC vertical machining center for machining metal parts. Axes: 3-axis Strokes: 610 x 410 x 450 mm Numerical Control: Fanuc OT Equipment: Chip Conveyor Manufacturer: Yang Iron Works Co., Ltd.Country of Manufacture: Taiwan Serial No.: Z00321

X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much.

A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible.

Tool presettler SOMET type SPS 500 UMash. No. S1-020 Year of construction 1987Table surface 545 x 1000 mmTravel distances X = 500 mm, Y = 340 mmWidth in the portal 550 mmHeight table - lower edge portal 250 mm- Portal longitudinal guidance on the right and left of the table- Adjustment via very fine threaded spindles with handwheel- Quick adjustment via electric unlocking- Projector screen 150 mm with crosshairs and coordinates MEOPTA PMP100- 2 pieces of clamping devices for tool measurement- on substructure with shelf and drawerSpace requirement L

6-Axis AC Servo Drive, Servo Actuator, Servo Inverter, Servo Amplifier, Servo Controller, Frequency Converter, Drive Controller for RobotFANUC Type A06B-6105-H003No. V07Z08282NEU / unusedInput voltage: 200 - 240 VACNornpower: 1.5 kWAnnumber of axis outputs: 6Output current: 6 x 13 AGtotal output current: max. 78 AManual No.: B-81465Standard: EN50178Installed circuit boards: A16B-2000-0063/07D A16B-3200-0440/05C- Plexiglass cover not includedDimensions W x H x D 70 x 170 x 380

6 Axis Robot Servo Controller,Drive, Motion Control, Servo Pack, Servo UnitServo Unit for YASNAC XRC UP6YASKAWA / MOTOMAN Type CACR-UP6AACO/N RA8616-0Y4A-46S/N: D000Z2676590046Version: 6 Axis Module for Robot- Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6- Interface USB Power Supply Type JUSP-RCP01AACAnmity W x H x D: 270 x 310 x 200 mmWeight: 8.5 kgUsed, very good condition; used

Kuka KR 30/2 6-axis industrial robot Manufacturer: KUKA Model No.: KR30-2 Nominal total load: 30 kg Reach: 2000 mm Repeatability: ± 0.15 mm Control: KUKA KR C1 (01-051-810) Kuka Teachpendant KR C1 Weight : 867 kg Year of Make: 1997 Operating hours: approx. 20000 Robot Applications Loading and unloading parts Processing Handling-of-parts Polish Arc welding Palletizing Robot Movement Speed: Axis 1: 140º/s Axis 2: 126º/s Axis 3: 140º/s 4 axis: 260º/s Axis 5: 245º/s Axis 6: 322º/s More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Huber & Grimme Model: HG3000 TW Year of Manufacture: 2000 Drive Type: Servo Motor Type: NUM / HD Voltage: 230 / 400 V Frequency: 50 Hz Power: 16.5 kW Material to be machined: Aluminum Machining Range - X-axis: 500 mm - Y-axis: 3000 mm - Z-axis: 400 mm Machine Concept - Type: Portal system - Workholding / Machining Option: Exchange table Performance - Spindle speed: 20,000 rpm - Axis speed (X/Y/Z): 40 m/min Tooling and Clamping - Clamping system with zero-point possible: No - Tool count / Magazine slots: 10 / 12 - Tool holder taper: Jäger WK 19 Machining Capabilities - Number of sides machinable: 5 sides - Thread cutting capability / Max diameter: Yes - Integrated 3D measuring system: No Control and Software - Control system: Num - SolidWorks / CAM-compatible post-processor: Yes - Data backup / data transfer concept: No Cooling & Lubrication - Cooling  ...

Manufacturer: Mikron Model: VCP 1000 (ITNC 530 Control) Year of Manufacture: 2004 Weight: 10,500 kg Power Supply: 400 V / 50 Hz / 3 Phases Current: 100 A Power Consumption: 40 kW Control Circuit Voltage: 24 VDC Sound Level: 68 dB(A) Find more here - / Contact us at -

Manufacturer: Mikron Model: VCP 1350 Year of Manufacture: 1999 Weight: 10,100 kg Power Supply: 3 Phase, 400 V, 50 Hz Current: 125 A Power Consumption: 46 kW Control Circuit Voltage: 24 VDC Sound Level: 75 dB(A) Certification: CE Find more here - / Contact us at -

Linear slide, toothed belt axis, stroke 800, EGC-185-800-TB-KF-0H-CK, 556817, Festo, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. Festo linear slide, toothed belt axis, EGC-185-800-TB-KF-0H-CK, 556817, Festo, second-hand Overall dimensions: 1143x190x170mm, approx. 65kg Table 280x110mm, stroke 800mm, bore for drive shaft 32mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of t ...

Linear drive, toothed belt axis, stroke1500, EGC-120-1500-TB-KF-0H-GV, 556815, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo linear drive, toothed belt axis, linear module, EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x120x120mm, approx. 60kg, carriage 300x70mm, stroke 1500mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for  ...

Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Number of tool positions: 30 Spindle power: 14 kW Spindle speed: 14,000 [rpm] A-axis travel: 360 [°] (+/-) Indexing accuracy: 0.001 [°] Stroke: -10 / +95 [°] Indexing accuracy: 0.001 [°] Tool Changer Type : Loader Arm Table load capacity : 350 [kg] Auction-ID: A7-32339-12

Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw max. 24.000 upm Toolchanger 6 positions HSK 63 F Total installed power 70 kw Weight approxm. 9,5 tons - Producer Intorex - Type TMC 3000 - Year of construction 2010 - Location Germany

cnc machining center with consoles lard  Processing field X 4500 mm Y 1550 mm Z 490 mm Gantry bridge over linear guides and racks running in X and Y max axis speeds X + Y 100 m/min Z 20 m/min

Reconditioned 5 axis robot CMA mod. ROBY 5EX-G - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2025

Manufacturer: MAZAK Model: FJV-35/60 Year of Manufacture: 2003 Find more here - / Contact us at -

Manufacturer: MAZAK Model: FJV-60/120 Year of Manufacture: 2003 Find more here - / Contact us at -

Manufacturer: Mazak Model: FJV-50/80 Year of Manufacture: 1999 Main Circuit: 3AC V50/60Hz Control Circuit: AC100V / DC24V Main Motor: Max. 15.0 A / 200 V Rated Capacity: 67.6 kVA Find more here - / Contact us at -