330 lc used for sale

Aircooled chiller/Heat pump Systemair SYSCROLL.330.AIR 308,3/333 kW Cooling capacity: 308,3 kW (12/7 — 35°C) Heating capacity: 333 kW (40/45 —7°C) Year of manufacture: 2018 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Copeland (scroll) Number of fans: 8 pcs. Type of refrigerant: R410A Dimensions: 4.6 x 2.2 x 2.65 m Weight: 2899 kg Condition: Excellent, Outlet

two colour offset, Ryobi 3302HA, year: 2005, 39,7 million, size: 33x45 cm, Semi automatic plate change, Alcohol dampening, WITHOUT alcohol pump/chiller

Three knife trimmer - in-line, Serial: 05010048, Min untrimmed size: 178 x 127 mm, Min trimmed size: 148 x 100 mm, Max untrimmed size: 330 x 241 mm, Max trimmed size: 307 x 328 mm, Stack height: 51 mm, Min trim: 2.5 mm, Max trim: 152 mm, Speed: up to 400 cycles per hour in single stream mode, Memory: up to 99 set-ups, Change over time: Fully automatic within 20 seconds

: neu : ca. 4 Monate ab Auftragse : Türkei : 32000 € : 611.2 € : Doppelsäulenführung : 5000 x 34 x 1,1 mm mm : 20 - 120 m/min : 330 mm : 330 mm : 350 x 330 mm : 845 mm : 1.1 kW : 3 kW : 0.12 kW : 2815 mm : 1935 mm : 1855 mm : 2560 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 3100 mm distance between columns: 2600 mm Control: Cybelec VisiTouch 24 throat: 500 mm dayligth: 500 mm stroke: 300 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 18.500 kg dimensions: 3900 x 1970 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 6100 mm distance between columns: 5600 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 160 mm/s bending speed: 0-9 mm/s total power requirement: 32 kW weight of the machine ca.: 36.000 kg dimensions: 6970 x 2300 x 4150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: Cybelec VisiTouch 24 Arm length: 500 mm stroke: 300 mm dayligth: 500 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 21.000 kg dimensions: 4850 x 2300 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3 - 50 mm drawing length: 315 mm working speed: 3 - 15 m/min total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 1 x 1,6 m No. 3327: wedge and keyway drawing machine manufactured by WGW, type NZM 50/330 Accessories: 8 drawing tools: 1 x 8 mm / 2 x 10 mm / 1 x 21 mm / 4 x 22 mm Working speed 3-14.7 m/min Groove width 3 - 50 mm Groove length up to 315 mm Space requirement 1.5 x 1.0 x 1.6 m Weight 800 - 1000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

B&A REF: 9330 TON: 1600 SCREW DIAMETER: 175MM SHOT WEIGHT: 16042 STROKE VOLUME: 17438CM3 INJECTION PRESSURE: 1843AR PLATEN SIZES: 2250 X 2100MM DBTB: 1850 X 1400MM MIN MOULD HEIGHT: 700MM MAX MOULD HEIGHT: 1600MM MOULD OPENING STROKE: 2700MM MAX DAYLIGHT: 3400MM EJECTOR STROKE: 350MM CONTROLS: MC5 CORE PULLING: 4 AIR VALVES: 2 MOTOR: 200 HEATING CAPACITY: 191KW ROBOT: KRAUSS BEAM SERVO SCREW DRIVE: ELECTRIC

A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible.

Specification Injection Moulding Machine Demag Ergotech 650/1000-3300 General data Clamping force: 650 t Year of Make: 2005 Control: NC4 Clamping unit Size of the clamping plates: 1450 x 1350 mm Clearance spar spacing: 1000 x 900 mm Tool installation height: 450 - 950 mm Opening travel: 930 mm Max. plate spacing: 1880 mm Ejector force: 96 kN Ejector travel: 300 mm Injection Unit 3300 Screw diameter: 80 mm Injection volume: 1779 ccm Injection weight in hp: 1600 g Spec. Spray pressure: 1855 bar L/D Screw Ratio: 20 Facilities Hydraulic core pull: 4 Hydraulic cascades: 8 Hot runner control points (zones): 16 Robot Wittmann W 843 Pro, built in 2021 (Z 3,000 / Y 2,000 / X 1,200 mm, C-axis servo 180°, B-axis servo 270°) included in the scope of delivery

Manufacturer: ENGEL Model: duo 1060H/330W/720 Combi US Type of Machine: Injection moulding machine 650ton Year of Manufacture: 2022 Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m, as recorded in source documents) - Weight 35000 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi, as recorded in source documents) - Cooling or heating water 4 (bar or psi, as recorded in source documents) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Alpina PB 330 incl. loader + unloader, in checked working condition

Hoegger Alpina PBV 330 Vacuum Bowl Cutter incl. loader+ unloader 5 years ago machine was refurbished by alpina

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 € : 160.19 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1500 mm : 1400 mm : 1850 mm : 345 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10460 € : 200.83 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1600 mm : 1200 mm : 1800 mm : 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Option: Adjustable vice pressure (R1) EUR 403,-- The data for this ad was created with ModulMWS - the softw ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 17770 € : 341.18 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 220 mm : 835 mm : 0.37 kW : 0.12 kW : 2800 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed: PLC 800 mm/stroke, CNC/Touch: 600 mm/stroke variable cutting pressure. Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices mat ...

Key data: 35 KW

2011 ARROW 35 kWe Arrow VR3-330 Gas CHP Generator Enalco Heat Exchanger Heinzmann Control 35 kWe gas-powered Combined Heat & Power (CHP) generator unit featuring an Arrow Engine Company gas engine, Enalco heat exchanger and Heinzmann engine control system. This used gas generator and CHP unit is suitable for industrial, commercial, agricultural and on-site power generation applications, as well as CHP and cogeneration projects. 35 kWe Gas CHP Generator Specifications Equipment Type: Gas Generator / Combined Heat & Power (CHP) Unit Electrical Output: 35 kWe Fuel Type: Gas Engine Manufacturer: Arrow Engine Company Engine Model: VR3-330 (appears to be; buyer to verify from identification plate) CHP System: ICS / Low Carbon Solutions Year of Manufacture: Approx. 2011 Heat Exchanger: Enalco Heat Exchanger Serial No.: 04167254 Engine Control System: Heinzmann  ...

Three-phase oil-filled transformer, not used, Manufacturer MF Trasformatori s.r.l. Rated power 3300 kVA, Cooling: ONAN, Frequency: 50 Hz, Total weight 6750 kg, Primary side: Voltage 6000 V, Current 317.5 A, Secondary side: voltage 2x725 V, non-current 2x1314 A

4 Color Sheet-Fed Offset Press Ryobi 3304H 4 Farben Offsetdruckmaschine / 4 Color Sheet-Fed Offset Press Ryobi 3304H Baujahr / Year 1999 - Serial-No. 1532 Size max. Size 340 x 460mm Feuchtwerk / Dampening System VARN Compac Bedienpult / Console for ink and register PCS-F Automatische Wascheinrichtung / Automatic washer for roller and blanket Verchromte Cylidner / Chromed cylinders Puderapparatt / Power spray Kompresor / Compressor Guter Zustand / Good condition.

Electric forklift with rotator, 3 tonnes, EFG 430k 330ZT, Jungheinrich, used - refurbished Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The forklift truck comes from a certified manufacturing company. According to the advertisement, it has been in use for 15,000 hours. All servicing and inspections have been carried out by the manufacturer. Technical specifications: - Year of manufacture 2015, load capacity 3,000 kg, model EFG 430k 330ZT, - Lift height 3,300 mm, overall height 2,325 mm, - The 80 V battery is sufficient for light-duty use. - Battery with automatic water-filling system - Standard mast, cab without doors, - Includes a professional Kaupp S 8-DE 28-S-G rotator - Side shift on the fork tines - Includes battery charger, We would be delighted to invite you to our premises for a detailed inspe ...

Kronen washing machine for lettuce Dimensions: L 4100mm, W 1000 mm, H 1650 mm

Key data: 1100 kN

Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 2 ...

Key data: 1400 kN

Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimetal ...

Key data: 1600 kN

Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bim ...

Key data: 3300 , 776 , 65

SANDRETTO serie 8 1331/330 Clamping force : 330 T Distance between tie bar : 650 x 650 mm Platen dimensions : 980 x 980 mm Mould thickness min / max : 210 - 730 mm Ejection strocke : 240 mm Injectable volume : 863 cm3 Weight in PS : 776 gr Pressure on material : 1550 bars Screw diameter : 65 mm Weight : 15 800 kg Dimensions : 7,90 x 1,85 x 2,30 m 

Rotoflex VLI-330 – Slitter rewinder Year: 2002 Speed: up to 200 m/min Max. unwind roll diameter: 762 mm; max. rewind roll diameter: 610 mm Core diameters: 25 / 40 / 50 / 76 mm Compressed air: 6 bar Slitting with circular knives. Usable working width and further equipment on request. Reference: PP-54976 Further information on request.

Key data: 330 V, 412 , 400

We offer a new ElectroQuell EQ-V400330 generator set, power: 412 kVA / 330 kW (PRP), engine: Volvo Penta TAD1344GE. Highlights: 30 Months Warranty · Made in the EU · Stamford Alternator · ComAp Control Module. PERFORMANCE DATA • Type: EQ-V400330 • Continuous power (PRP): 412 kVA / 330 kW • Emergency power (ESP): 452 kVA / 362 kW • Output: 400/230V, 50 Hz, 3-phase • Rated speed: 1500 rpm ENGINE • Manufacturer / Type: Volvo Penta TAD1344GE • Displacement (l): 12.78 • Charging: Turbocharged & Intercooler • Injection: In-line Injection Pump • Speed Control: Mechanical • Cylinders: 6 DIMENSIONS & WEIGHT • L × W × H: 4310 × 1600 × 2560 mm (soundproofed hood) • Weight: 4740 kg • Fuel tank: 798 l • Sound level: 70 dB INCLUDED 4-stroke, 1500 rpm, high-performance water-cooled diesel engine, Stamford Alternator, ABB circuit brea ...

Gallus RCS 330 – 8-colour UV flexo label press Year: 2005 Printheads: 8 with UV-Iterno Working width: 330 mm; speed: up to 160 m/min Max. unwind roll diameter: 1,000 mm Equipment: Rail system; Teknek cleaning, corona and antistatic E+L web guide and Sensotec register control Rotary die cutting with K1B Gap Master Tidland slitting unit with 2 knives AVT inspection and rewinder 2 tooling sets and 1 anilox set included Additional tooling and anilox rollers by agreement. Reference: PP-54640 Further information on request.

I am selling a panel sizing saw SCM SIGMA PRIMA 67 P. built in 2017. Cutting surface 3300x2200mm + rear lift table. Cutting height 67mm. Main motor 9.0 kW Scoring motor 1.3 kW Max saw blade diameter 320 + 160mm Joint area W.5400mm x D.9900mm 9 pcs grippers with pneumatic regulation Side positioning roller from above. Wincut optimization software included. Very good condition. Available same.

Model: M-900iB/330L Year: 2021 Type: A05B-1335-B213 Serial Number: R21Y20066 Max Load Capacity: 330kg Max: 3203mm Number of axles: 6 Repeatability: ±0.10mm Vertical reach: 3539 mm Weight: 1780 kg Controller: FANUC R-30iB Plus

Sanding width 1350 mm. Workpiece thickness: 3 - 200 mm Equipped with 3 aggregates, 1st steelroller, motor 18,5kW 2nd roller 65° Shore, motor 15kW shared with 3th aggregate 3th Kombi unit, combination roller with 45° Shore and pneumatic controlled sanding shoe Electrical height adjustment of the transport table. Pneumatic sanding belt tension. Sanding belt oscillation. Pneumatic sanding belt cleaning Throughput speed with variator Workpiece thickness measurement with manual setting at the machine feed Sanding belt dimensions: 1370 x 2150 mm 4 rollers on in- and outfeed table

Offer 26284 Technical data: - Inverter DC welding machine for MIG-MAG – pulse – standard – and - MMA – welding - Welding current 330 A 25% ED - 250 A 60% ED - 210 A 100% ED - Welding current infinitely adjustable from 5 to 330 A - Wire diameter steel - stainless steel - AL 1.0 / 1.2 mm - Program control M3-10 with 4 main welding programs - Digital display for welding voltage, current and parameters - Adjustable parameters : wire feed m/min ,welding stress correction - Dynamics, wire burnback time, gas afterflow time, etc. - Drive 4 L P wire feeder with 4 roller drive and program control - Roll wire feeder infinitely adjustable 0.25 - 24 m/min - 2 bar + 4 bar – regulation + special, points - Water-cooled hose package approx. 4 m - Ground cable - Pressure reducer - Intermediate package machine – separate wire feeder case 5 m - Connection 400 ...

Unwinder Webguide E&L Web breaking detectors Teknek cleaning system Corona 8 Flexo section 8 UV ITERNO Ink pumps Rotary die cut ( K&B Gap Master) Complete rail system Turnbar Verso printing unit Sensotec control register system Antistatic system Knife cutting unit Rewinder Cold Foil

Complete reconditioned Caterpillar 3304 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 02B: 7N3272, 05B: 7N3278, 07Z: 1167579 1259359 1259360 1266209 1298178 1322010 0W0178 0W2002 0W2254 0Z7504 2W1876 2W3989 2W4485 2Y8607 2Y8609 3Q5155 4P2393 4P2394 4P4246 4P4247 4P4253 4P5557 4P9154 4P9308 4Q5014 4Q5161 5R4901 5R5450 9Y1721 9Y3047 0Z7863 0Z8210 1079408 1079409 1079410 1157533, 09Z: 1167590 1167591 1167592 1167598 1W4584 2W0098 2W4485 2W6099 2W6100 4P0903, 10E: 1118013 1118014 2310150 1W3871 1W3875 1W3876 1W3877 1W3880 1W3883 1W3885 4W3918 4W6878 4W7765 9Y6208, 12Z: 602529 1148904 0Z8258 1N3062 1N3063 1W4 ...

Complete reconditioned Caterpillar 3306 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 08Z: 1373598 2123756 0W0997 0W1007 0W1766 0Z5948 0Z7485 0Z7500 0Z7665 0Z7771 0Z7860 0Z7900 0Z7915 0Z9864 1N3060 1N3061 1W0542 1W0543 1W0544 1W1342 1W1344 1W1346 1W2630 1W3210 1W3225 1W3231 1W5821 1W6092 1W6093 1W9098 2W0817 2W0818 2W0819 2W0820 2W4483 2W4486 3Q5034 3Q5466 3Q5755 3Q5767 3Q6852 4P7467 4Q5200 4W8491 5C5604 5C6813 5R6935 5R7776 5R7814 5R7956 5Z4836 5Z5151 5Z5168 5Z5358 5Z5912 5Z6635 5Z6854 5Z7500 5Z7665 5Z7860 5Z7900 5Z7915 5Z8438 5Z9020 5Z9864 5Z9904 5Z9917 6N3055 6N5908 6Z7065 7C0501 7C1426 7C1959 7C2032  ...

Cross table with turntable Table length 330 mm Table width 220 mm x-way 210 mm y-way 125 mm Table height 150 mm T-slots 12 mm Weight 33 kg Dimensions L x W x H 0.41 x 0.35 x 0.22 mm Condition: never used / new (5) Auction-ID: A7-51438-503

Auction-ID: A7-51107-1059

LCR_Meter developed by HP in collaboration with Yokogawa. Model 4285A

Safety Interface, Control Unit, Control Electronics SICK LCUX1 - 400 ( LCUX1-400 ) 1013410 24 V 6 W used, tested ! Dimensions: 155 x 80 x 120 mm

Control and display panel with motherboard PMA LCM025 4012-023-85022 motherboard 4012-157-25336-8341 spare part for industrial controller KS94 ! New !' Dimensions: 175 x 95 x 95 mm

LCD touchscreen display, control panel SIEMENS SIMATIC PANEL 1P 6AV6642-0BA01-1AX0 ( 1P6AV6642-0BA01-1AX0 ) used ! Dimensions: 210 x 160 x 50 mm

Safety Interface, Control Unit, Control Electronics SICK LCUX1 - 400 ( LCUX1-400 ) 1013410 24 V DC 6 W New ! Dimensions: 155 x 80 x 120 mm

Contactor TELEMECANIQUE LC1D09BD 035307 4 kW 400 V Control voltage: 24 V DC New ! Dimensions: 115 x 95 x 50 mm

Contactor TELEMECANIQUE LC1D12BD 035371 5.5 kW 400 V Control voltage: 24 V DC New ! Dimensions: 115 x 95 x 50 mm

Contactor TELEMECANIQUE LC1-D633 LX-D40 220 30 kW 380 V Control voltage: 220 V AC used ! Dimensions: 130 x 75 x 110 mm

LCD monitor with electronic for Cybelec DNC 800, 804, 806 control . only a few years in use. Supplier / Manufacturer : TSUBIS Germany , Art Nr: LCD10-0072

Siemens LCD Monitor DSC 1904-D Model No. 08675402 Year of Make: 2006 Condition: Used, removed from a working system Application: As a live and reference monitor for Siemens AXIOM Artis dTA/dFA/dTC Used as a spare part • Before taking over, all devices or systems have been tested on site for their functionality. • The monitor is located in our warehouse in Freiberg / Germany. • You buy the monitor in "IST" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repair ...

Siemens LCD Monitor DSB 1804-DC (2 pieces) Model No. 03099975 Year of manufacture: 2005 and 2008 Condition: Used, removed from a working system (Siemens AXIOM Artis dTA) Application: As a live and reference monitor for Siemens AXIOM Artis dTA/dFA/dTC Used as a spare part • Before taking over, all devices or systems have been tested on site for their functionality. • The monitor is located in our warehouse in Freiberg / Germany. • You buy the monitor in "IST" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! •  ...