330 lc used for sale

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 4.7 m -Type: DIX MS 330-4 SA -Transport dimensions: 400/480/H100 mm -Weight: 4.2 kg

double pump for high speed - Screw diameter: 30 mm - Shot weight max: 104 g - Injection pressure: 2.180 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Nozzle stroke max: 250 mm - Clamping force: 1.200 kN - Mould opening stroke max: 500 mm - Mould height max: n/a mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Heating zones: 2 - Ejector force: 47 kN - Oil tank capacity: 300 l - Power: installed max: 25 kW - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm - Weight: 7.300 kg

Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...

USED TETRA PAK TPA 19 330ML PRISMA FILLING LINE FOR SALE YEAR 1998 Item #: Usm-214 Category Tetra Pak TBA 19 TPA 19 330ml Prisma Filling Machine, Version 10v, Working Hour 20500, Year 1998 Tetra Cardboard Packer 70, Year 1998 Easy ride Conveyors and Paper trolly Condition: Good

Key data: 660 mm, 3000 mm, 440 mm

Sine 330/3000 D Well-maintained conventional lathe without mounted lathe chuck but with standard accessories The construction follows the classic design however, is based on a heavy, one-piece cast machine bed. How in the case of heavy lathes here, too, the adhesion between the engine and spindle via a manual Multi-plate clutch. With integrated Features such as the removable bed bridge, rapid traverse and a Taper turning device. WORKSPACE Workpiece length 3000 mm Turning diameter over bed 660 mm Circumferential Ø over support 440 mm Turning diameter without bridge 900 mm Bridge length 320 mm Bed width 400 mm TRAVELS X-axis travel 368 mm Travel Z1 axis 230 mm Swivel range upper slide 45° MAIN SPINDLE Spindle speed 25 1/min - 1600 1/min Spindle bore 105 mm Spindle holder D1-8 RUSH COURSE Rapid traverse X-axis 2000 mm/min Rapid traverse Z-axis 4000 mm/min ...

MPS EF 330/7 Category: Label Printer Year Built: 2005 Colors: 7 Max. Size: 330 mm Condition: Good Location: Europe Availability: Immediately Additional Machine Details 7 colors Servo flexo press suitable for printing on self-adhesive (PS) materials and unsupported film Maximum web width: 330 mm Maximum print width: 320 mm Plate thickness: 1.14 mm Unwind with splice table Web cleaner Vetaphone corona treater 7 flexo print units Full UV GEW system Cold foil / lamination unit BST web inspection camera 1 Rotary The Station Waste matrix rewind Back scorer Product rewind Automatic registration support Plate flipping system for easier registration Cooled drums Antistatic system Available Printing Cylinders (Z) 83, 90, 97, 106, 111, 116, 128, 136 Condition Machine in high-productivity operation Maintained under a very strict maintenance program Inspection  ...

Key data: 7 KW

A total of 6 starters for sale by Bosch for Liebherr Gasmotoren 1021 8368. Technical details: Volts: 24 volts Power: 7.8 KW Number of teeth: 11 Hole attachment: 3 Direction of rotation: right Riginal numbers are for comparison purposes only: Starter Bosch 0001330013 Starter Bosch 0001330069 Starter Bosch 0001330070 Starter Bosch 0001383037 Starter Bosch 1986S10003 Starter Bosch 1986S10004 Starter Liebherr 10218368 Starter Liebherr 11386646 Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades o ...

Engine Brand: PERKINS, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 390 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 330 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 476 , Generator Tank Capacity: 600 Liter(s), Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/catalog/product/view/id/203831, , = More information =, , Empty weight: 6.285 kg, Type number: GEH330 GENERATOR 330 KVA

We sell here 3 starters of the brand Bosch for e.g. Liebherr G944. The starters are new. If you have any questions, please contact us. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on ov ...

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 500 x 330 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 510/330/H50 mm -Weight: 4 kg/pc.

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Yellow , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 205 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 238 , Generator Hz: 60 , Generator Volts: 440 , Generator Amps: 313 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3306di-sr4b-genera tor-238-kva-used/210, , = More information =, , Empty weight: 3.500 kg, Type number: 3306DI SR4B GENERATOR 238 KVA

; Power [PS]: 359; Gross weight [kg]: 3050; Engine: FPT CURSOR9TE8; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 408

; Power [PS]: 359; Gross weight [kg]: 2261; Engine: Perkins 1506A-E88TAG5; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 359; Gross weight [kg]: 2854; Engine: Perkins 1506A-E88TAG5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 528

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 203 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 325 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3306b-generator-22 5kva-used/31, , = More information =, , Year of construction: 1010, Empty weight: 2.500 kg, Type number: 3306B GENERATOR 225KVA

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 28 Hour(s), Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: yes , Rated Power: 125 Kw, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/compressors/caterpillar-3306-compressor-1 3-bar-new/17871, , = More information =, , Year of construction: 1010, Empty weight: 20.000 kg, Type number: 3306 COMPRESSOR 13 BAR

; Gross weight [kg]: 3400; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 995

; Gross weight [kg]: 3524; Registration Number: 1; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 610

; Gross weight [kg]: 2950; Engine: Perkins 1706A-E93TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 385

Engine Brand: CATERPILLAR, Condition: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/292166, , = More information =, , Type: Engine, Empty weight: 1.200 kg, Type number: 3304PC 4B-7N3303

The robust single-shaft shredder is equipped with 7 offset 40/40 mm indexable blades on the rotor The extremely robust design allows the shredding of data carriers such as hard drives, etc., files with metal components, wood-metal mixed material, metal-plastic material, recycling material, textile and carpet, rubber waste, horse manure, etc., sheep's wool, compost, etc. Technical data: 1 rotor with 7 offset indexable blades 40/40 mm 1 profiled counter blade 1 interchangeable screen perforation 20 mm round (can be adapted as required) Feed width 366 mm Rotor diameter 330 mm Motor 7.5 kW, 3x380 V, 50 Hz (can be made stronger) Speed approx. 580 rpm (a gearbox can be set up for low speeds) Machine new Information from Peter Ari Schär from MATEC Changes, errors, prior sale reserved ! Manufacturer: MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse ...

; Gross weight [kg]: 2789; Engine: TAD1341GE; Accessories: Tanker, Battery, Control Panel, including: coolant Heater and battery charger; Water Tank Volume [l]: 515

Dough section and knitting machine Sinmag SM-330Y semi-automatic - Semi-automatic roll press - Sharing and impact - Manufacturer: Sinmag Europe - 30 pieces - Model: SM-330Y - Dough insert: 750- 2400 grams - Unit weight: 25-80 grams - Machine weight: 340 kg - 400 Volt/ 3Ph/ 50Hz - Year of construction 10 / 2020

Homag Profi KAL 310/8/A3 with Power TVL 100/15/LQ/S and Profi KAR 330/7/A3/WZ – built in 2013, For sale is a high-qualityHomag edge banding machine Profi KAL 310/8/A3, built in 2013, combined withPower TVL 100/15/LQ/S and Profi KAR 330/7/A3/WZ,, State: Very good, well-maintained condition, power: Efficient and precise processing for the highest quality standards, Equipment:, ✔ Fully automatic edge processing, ✔ High flexibility for different materials, ✔ Integrated feedback for optimized production processes, ✔ Robust and reliable technology from Homag, Ideal for professional use in wood processing!, Please contact us for further details or to arrange a viewing., Subject to prior sale, changes and errors!

; Gross weight [kg]: 3350; Engine: Volvo TAD1341GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

; Power [PS]: 359; Gross weight [kg]: 4600; Engine: Volvo TAD1380GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 330 mm -Groove width: 32 mm -Hole: Ø 110 x 45 mm -Quantity: 1x pulley available -Dimensions: Ø 330 x 45 mm -Weight: 18.2 kg/pc.

IGM-Welding-Station IGM Robot Designation: Rti 330 Year of construction: 2005 1st welding unit Manufacturer: Fronius Hoist no.: 4,0750,100 Designation: Transpuls Synergie 4000 2nd welding unit Manufacturer: Fronius Hoist no.: : 4,075,097,R Designation: Transpuls Synergie 4000 Extraction system Manufacturer: Füchtenkötter Designation: FKPF 64/4 V Year of construction: 2005 Find more here - / Contact us at -

capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 330 mm : 400 x 310 saw band length: 3820 x 34 x 1,1 mm band speed: 22 - 88 m/min table height: 930 mm total power requirement: 2,2 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise The data for this a ...

A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible.

groove width: 3 - 50 mm drawing length: 315 mm working speed: 3 - 15 m/min total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 1 x 1,6 m No. 3327: wedge and keyway drawing machine manufactured by WGW, type NZM 50/330 Accessories: 8 drawing tools: 1 x 8 mm / 2 x 10 mm / 1 x 21 mm / 4 x 22 mm Working speed 3-14.7 m/min Groove width 3 - 50 mm Groove length up to 315 mm Space requirement 1.5 x 1.0 x 1.6 m Weight 800 - 1000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22252 Specifications: - Cutting range at 90° round + square 330 mm - flat 600 x 320 mm - Mitre adjustable left / right 30 / 45 ° - Schnittb. at 45° Re + Li around 320 mm - flat 350 x 320 mm - Material support height approx. 920 mm - Saw blade dimensions 4440 x 34 x 1.1 mm - Cutting speed infinitely variable 10 to 100 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise - Coolant device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 1400 x H 1400 x D 2400 mm - Weight approx. 1000 kg

Combination of Metal Detector and Weigh Checker. With two recect devices to check if product metallic impurities and/or meets target weight. - Specifications: stainless steel framework, weight range: 5-990g | detecting speed 0.2-0.75m/sec | detecting accuracy: FE from ? 1.0mm, SUS from ? 2.0mm | target weight accuracy: ? 0.5g | tunnel size WxH: 330x150mm | max. passing size WxH: 280x110mm | power: 220V/0.35kW, 50Hz/60Hz | dimensions and weight: L1700xW600xH900mm, 160/260kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Checkweigher with reject device to check if product meets target weight. New version with data readout. - Specifications: belt width: 220mm | measuring area (weighing belt): L500xW330mm | weight range: 10-10,000g | accuracy: +/- 1-4g | max. speed of the machine in neutral: 60 cycles/minute | power: 0.3kW, 220V, 1-phase | machine dimensions (mm) approx.: L2459xW684xH780(weighing belt) | 180kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 330mm | weight range: 5-999g | accuracy: +/- 1.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 330mm | weight range: 1-10kg | accuracy: +/- 3.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Presse à injecter DEMAG ERGOTECH 330 T en bon état? Référence : Ergotech E330-1450-NC4S? Année: 1998? 65 000 heures de fonctionnement ? Diamètre vis : 70 mm? Rapport L/D : 20? Volume injectable : 1039 cm3? Poids injectable en PS : 940 gr? Pression d'injection : 1400 bars? Course de dosage maxi : 270 mm?P uissance de chauffe : 27 KW? Dimensions des plateaux : 1040 x 950 mm? Distance entre colonnes : 710 x 630 mm? Epaisseur moule : 330 - 710 mm? Course d'ouverture maxi : 675 mm + Robot SEPRO type 3031 YN MPA II? axe X : 2500 mm? axe Y : 800 mm? axe Z : 1400 mm Dimensions de la machine : 6,50 x 2,00 x 2,30 m? Poids de la machine : 14 300 kg

Caterpillar 3306 - Used - 176 HP - 64Z

Reference Num.: 4205 Brand: Kodak Type: NexPress SX 3300 Construction year: 2014 Impressions: 13 mio Available: directly Status: Not in production Location: Deutschland

4 Farben Offsetdruckmaschine / 4 Color Sheet-Fed Offset Press Ryobi 3304H Baujahr / Year 1999 - Serial-No. 1532 Size max. Size 340 x 460mm Feuchtwerk / Dampening System VARN Compac Bedienpult / Console for ink and register PCS-F Automatische Wascheinrichtung / Automatic washer for roller and blanket Verchromte Cylidner / Chromed cylinders Puderapparatt / Power spray Kompresor / Compressor Guter Zustand / Good condition.

Injection molding machine

Hydraulic accumulator unit with pressure gauge and valve unit Manufacturer: Hydac Type: 6530-1A7/112A-330A Volume: 1 litre Inlet pressure: 90 bar Max. pressure: 330 bar Dimensions: 380×130×130 mm Weight: 3.7 kg Dismantled from: STAMA MC 325/S Condition: used Price plus VAT

Roller conveyors with chains pull 90° RA1846 Type: Transnorm 3300-600-550 Length: FL = 3300 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: KW: 0,37/S1 Engine type: Bremse, SEW Eurodrive angle: 90° Nominal / outside width in mm: 600 Roll width in mm: 550 Roll division in mm: 80 Conveying length in mm (NL): 3300 Bauhöhe in mm (BH): 140 Electric data: 230, 400 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your tea ...

Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 138 kg,

Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 136 kg,

A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible.

Vacuum cutter Alpina Swopper Sw V 330 S

ALPINA TIPPER TIE SW 330 CUTTER AS NEW

Cutting range round 90°/30°: 320mm/250mm, cutting range square 90°/30°: 320mm/240mm, max. profile capacity: 500mm/320mm, max. workpiece height: 320mm, throat depth: 520mm, saw band dimensions X/Y/Z: 4600mm/32mm/1.1mm, band speed: 96m/min. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/1400mm, weight: approx. 800kg. An on-site inspection is possible.

Key data: 900 , 183 , 40

Presse à injecter ENGEL 90T type ES 330/90 HL Année de fabrication : 1995 En bon état de fonctionnement Force de fermeture : 900 KN / 90 T Diamètre vis : 40 mm Volume injectable : 201 cm3 Poids de l'injection en PS : 183 gr Pression d’injection : 1300 bars Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 500 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 710 x 420 mm Dimensions : 4,22 x 1,42 x 2,00 m Poids : 5 900 kg