330 lc used for sale

Converting Line GM 330 FB-D (Hot stamp + Screen print) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Max. web width: 350 mm Min. web width: 50 mm Unwind diameter: max. 700 mm Rewind diameter: max. 600 mm - Vetaphone Corona - BST web edge control Hot foil stamping unit (flatbed) Speed: 6,000 stamps/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with a diameter of 250 mm Substrates: 50-500 μm Board thickness: 5-10 mm; 7 mm is standard Plate pressure: 30 tons Foil feed in transverse and longitudinal directions (rotating tower) Temperature range 80°-130° C Heat-up time approx. 20 min. Screen printing unit Speed 4000 print runs/h or 5-15 m/min. Web width 110 mm - 330 mm Frame size 660 mm x 500 mm Frame type 30 mm x 30 mm aluminum frame Printing area 330 mm (length) x 330 mm (width), Manufacturer: Grafisk Maskinfabrik, Substrates: 50-500 um

Complete Conversion Kit of TBA-19 330 ml prisam filling machine. All parts in original condition 10/10 and 100 % Tetra pak parts.

Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

Clamping set, flange with clamping cone PAGUS flange: Ø 330 mm shaft: Ø 185 mm New ! Dimensions: 330 x 330 x 100 mm

KUHN HR 304 D + SITERA 330-20 E – Drill combination (new machine, YOC 2023) For sale is a new KUHN rotary harrow drill combination consisting of HR 304 D and SITERA 330-20 E. KUHN HR 304 D Power Harrow • Working width: approx. 3.00 m • Overall width: 3.12 m • Rigid frame, multiplex gearbox • PTO speed: 540 / 750 / 1000 rpm • 10 rotors, FAST FIT quick-change tines • Working depth: 3–25 cm (up to 31 cm with long tines) • Overload protection with tripping • Three-point hitch cat. 2 or 3 • Max. tractor power: 190 hp • Min. tractor power: 80 hp • Weight: approx. 1,035 kg • Attachment for seed drill KUHN SITERA 330-20 E seed drill • Year of construction: 2023 • Working width: 3.00 m • Transport width: 3.00 m • Number of rows: 20, row spacing: 15 cm • SEEDFLEX 1000 seed drill (double discs) • HELICA volumetric rotary dosing  ...

Piston for Idra 3300 multiblock, 419540, D300mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 3300 multiblock, Piston dimensions: 1) D 160mm x length 426mm (geschliffene Fläche) 2) D 300mm x length 182mm (6 Nuten für Kolbenringe) 3) D 225mm x length 54mm (1 Rille) Ca. 185kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375,  ...

Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...

Replacement column for IDRA 3300, D330mm x 7410mm, (4), 240186, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7410mm, trapezoidal thread TR330 x 10, 4972 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Screws, hex bolts, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hex bolts/cylinder bolts: M10 stainless steel 330 kg -Hexagonal screws: DIN 933 M10 x 100 300 pcs / M10 x 20 4400 pcs -Cylinder head screws: DIN 912 M8 x 35 6600 pcs / M8 x 30 4200 pcs -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg

Servomotor, 330V, 4000 rpm, B2.SM.000-4400, KEB, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Unfortunately, the packaging is not visually perfect on the outside., - Shaft D11mm, centring D60mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our  ...

CONTACTOR Telemecanique SQUARE D LC1F330 330 AA Dimensions: 220 x 210 x 220 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG immersion depth: 330 mm 2 switching points flange Ø 50 mm float: plastic, colour: red level switch for central lubrication ! New !' Dimensions: 380 x 70 x 50 mm

Float Switch, Level Switch, Level Monitor, Level Switch SAXONIA SCHWARZENBERG Immersion Depth: 330 mm 2 Switching Points Flange Ø 50 mm Float: Plastic, Colour: White Level Switch for Central Lubrication ! New !' Dimensions: 380 x 70 x 50 mm

Pressure transmitter VDO 3300.045.007 0 - 5 bar Dimensions: 120 x 60 x 55 mm

Control cabinet cooling unit, control cabinet cooling unit RITTAL TOP THERM PLUS SK 3303500 suitable for PC cabinet EL407 ! 20°C to 55°C 230 V used ! Dimensions: 280 x 230 x 550 mm

Replacement column for IDRA 3300, D330mm x 7350mm, (5), PR11708354, die-cast servive, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column 5 for IDRA 3300, D330mm x 7350mm, trapezoidal thread TR 330 x 10, 4932 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (6) 220735, die-cast Servive, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (7), 220344, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (8), 102016, Strate/Idra, used Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Used The column is in a used condition and is still functional. However, the surface of the column already has many surface defects. The column can be used as a reserve for emergencies or as raw material for a new D300 column. That's why this column will be sold at a particularly low price. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

serial number 85Z12492 Generator set 3306 Generator model SR-4 B serialnummer 6EG00970 generator 400 Volts Power 225 kVA, 180 kV3 phases Current 325 Amps working hours 14.000 ore excitation 37 Volzs Current 7,7 Amps Power 250 kW overhaul done in 2025 Auction-ID: A7-40551-21

The Filler is optional working with or without PT To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Auction-ID: A1-45424-100

Auction-ID: A1-45424-99

Equipment: - Brown colour - 2 connections aeration / de-aeration DN 40 - Level - Thermometer - Taster - Oval manhole - Partial drain Friedrich n°2 40 - Total drain Friedrich n°2 40 Dimensions : - Depth: 1450 mm - Width : 1100 mm - Height : 2200 mm

Type: Industrial aluminium profile saw Blade diameter: Ø350 mm Motor power: 2.2 kW Speed: 3760 rpm Electrical supply: 380V 3F 50 Hz Auction-ID: A7-44526-5

Platform trucks, transport trucks, heavy-duty trucks, table trucks, assembly trucks, industrial trailers, container dollies, double turntable steering, heavy-duty trailers -Heavy-duty transport vehicle: industrial trailer with 2-axle steering -Platform: 2000/980/H400 mm -Stakes height: 1400 mm (welded) -Load capacity: 3.3 t -Tires: solid rubber -Number: 3x trolley available, 1x. with damaged tire see photo (discount) -Price per piece -Total dimensions: 3600/1200/H1400 mm -Weight: 370 kg/pc.

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3450

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3586

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3616

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45449-3553

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3555

Charger 24V with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45449-3547

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3665

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3523

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3598

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3583

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3570

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3572

Tank system for oil supply or disposal, empty weight: 280 Kg. Power source: 400V Auction-ID: A1-45495-324

Tank system for oil supply or disposal, empty weight: 280 Kg. Power source: 400V Auction-ID: A1-45495-321

Tank system for oil supply or disposal, empty weight: 280 Kg. Power source: 400V Auction-ID: A1-45495-323

Tank system for oil supply or disposal, empty weight: 280 Kg. Power source: 230 V Auction-ID: A1-45495-322

with 2 pcs. roller conveyor Auction-ID: A7-45452-19

A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Cutting stroke 500 mm Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-15

Top all-wheel drive Ford Tranit with 4 cylinder 2.5liter diesel engine. Starts immediately, no oil loss, all-wheel drive shifts tip top, all-wheel drive can also be switched on. Interior as shown in the pictures. Formerly active in the Austrian Armed Forces. Austrian road approval or COC papers available Hardly any rust stationed at the military training area and therefore few salt trips. NO RUST PENETRATION - Nowhere ! Last service about 1000KM ago, diesel engine WITHOUT AdBlue ! Current kilometers: 147687 (can still change slightly - still being driven!) Brakes New, Wheel Bearings - New Pickerl valid until 01/2027 Auction-ID: A1-45733-23

Homag Profi KAL 310/8/A3 with Power TVL 100/15/LQ/S and Profi KAR 330/7/A3/WZ – built in 2013, For sale is a high-qualityHomag edge banding machine Profi KAL 310/8/A3, built in 2013, combined withPower TVL 100/15/LQ/S and Profi KAR 330/7/A3/WZ,, State: Very good, well-maintained condition, power: Efficient and precise processing for the highest quality standards, Equipment:, ✔ Fully automatic edge processing, ✔ High flexibility for different materials, ✔ Integrated feedback for optimized production processes, ✔ Robust and reliable technology from Homag, Ideal for professional use in wood processing!, Please contact us for further details or to arrange a viewing., Subject to prior sale, changes and errors!

Tetra Pak TBA19 330 ml Prisma Filling Line General Information: - Manufacturer: Tetra Pak - Model: TBA 19 – Version 010V - Year of Make: 2003 - Capacity: 6,000 packs/hour - Filling Volume: 330 ml - Format: Prisma - Condition: Very good used condition Line Overview: Complete Tetra Pak filling and secondary packaging line for 330 ml Prisma carton packs, designed for reliable and efficient production in dairy and beverage applications. The line combines a proven Tetra Pak TBA19 filling machine with a brand-new cap applicator and a cardboard packer, ensuring modern functionality and high operational reliability. Ideal for producers looking for a cost-efficient, ready-to-install solution with upgraded components. Main Components: - 1. Filling Machine - Make: Tetra Pak - Model: TBA 19 – Version 010V - Capacity: 6,000 p/h - Volume: 330 ml - Format: Prisma ...