300 kw to used for sale

S/s boot cleaner, brush length: (2x) 300 mm, (1x) 120 mm, total dimensions: 900 mm x 500 mm x 1030 mm.

Description: Magnetic force 300 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. NOTE: Free shipping to many European countries. Details can be found in the Special Terms & Conditions of this auction. Approximate shipping time: 15 working days after settlement. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 220 x 250 x 130 mm, weight approx.: 9 kg

S/s switch cabinet, dimensions: 300 mm x 800 mm x 1250 mm.

Steel switch cabinet, dimensions: 300 mm x 1000 mm x 1000 mm.

Digital clock, dimensions: 600 mm x 300 mm x 170 mm.

Silver coin Bhutan 300 Ngultrum 1992 proof Olympia 1992 pp, silver .925 31.47 gr, tarnished, encapsulated, KM77

Silver coin Bhutan 300 Ngultrum 1992 proof Golden Langur pp, silver .925 31.46 gr, tarnished, encapsulated, KM75

Description: 20 x Solar garden lighting 5W -IP65 - Black - Warm white 3000k - (LY01) 450 Lumen - PC material - Dimensions: Ø 90 x 110 - voltage 85-265 V 50-60Hz - SMD LED - Lifespan: 30,000 hours - Fixing kit not included - suitable for indoor and outdoor use Approx. Onsite Dimension. (l x w x h): 400 x 400 x 300 mm, weight approx.: 8 kg

Description: Magnetic force 300 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. NOTE: Free shipping to many European countries. Details can be found in the Special Terms & Conditions of this auction. Approximate shipping time: 15 working days after settlement. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 220 x 250 x 130 mm, weight approx.: 9 kg

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

Cat. No. 12-2945 New Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: stable stack crown Manhole lid DN 400 6 x Star Head Eye Screws 1 x Threaded welding nozzle DN 50 with blind cap 1 x Overpressure valve 1 x CO2 ventilation valve Body: 4 x Beading stiffeners Underbody: forward pulled outlet pipe DN 50 Cone floor 4 feet, very stable design with pallet truck underpassable with forklift shoes for fork holder Supplement (on request): Fermentation spandconnection DN Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. Weight 85 kg Height 1410 mm Diameter 700 mm Cylinder height 750 mm Material AISI304 (V2A) 1.4301 Test pressure 3.4 bar Construction form vertical Working pressure range +2/-0.15 b ...

56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 112 traverses -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU c ...

Attachment: Lamella separator Condition: pre-owned m³/h up to 3000 m Usage: Separation of solids and liquids by sedimentation. Lamella separator as a preliminary stage before filter presses are often used for thickening. The filter press in relation to the filter surface can be sized smaller through a thin slurry before thickening. The plant is in good condition and available for rent and for sale. Visit us at the factory is like possible agreement.

used approx. 30 m³ / 30000 litres steel tank interior coated double-walled above - ground - 2 steel base - good condition Dimensions: approx. Ø 2.00 m x about 10,00 m of the tank is coated from inside, double-walled and Get up 2 steel bases. Steel tank / container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, edible oil, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

- Tischgroesse 960 x 350 mm - Schleifbandhöhe 200 mm - Bandlaenge 3000 mm - Bandhoehe 200 mm - Schleifbandrueckwand 1050 x 200 mm - Oszillationshub ca. 20 mm - Bandgeschwindigkeit 20 m/sec - Tischhub bis 230 mm - Motorleistung Oszillation 0,25 KW (0,34 PS) - Motorleistung Hauptmotor 3,0 kW (4,0 PS) - schwere und sehr hochwertige Gesamtausfuehrung - Furnierschleifeinrichtung mit Feinjustierung, Kontaktschuh, Entlastungsrollen und Anschlaegen - Einlauflineal mit Nuten fuer Furnierueberstaende - eigener Oszillationsantrieb mit Getriebemotor - ausziehbare Tischverbreiterung mit Multirollensystem serienmaessig - Schleifaggregat stufenlos schwenkbar bis 45C - Rundschleiftisch serienmaessig - Gehrungsanschlag mit Noniuswinkelskala - gefederte Bandspannung serienmaessig - grafitbeschichtete Laufflaeche - Absauganschluss 120 mm - Lieferumfang: Schleifband, Furnierschleifeinrichtung, Gehrungsansc ...

Technische Daten: - Arbeitslänge 3000 mm - Arbeitsbreite 1250 mm - Material Dicke 25 - 90 mm - Anzahl der Etagen 12 - Anzahl der Einspanneinheiten pro Fach 8 - Luftanschluss 8 bar, 1/2 \" - Motorleistung Drehvorrichtung 0,55 kW - Druck pro Einspanneinheit 1 - 12 kN - Max. Belastung pro Fach 150 kg - Pneumatik Camozzi - Elektrik Telemecanique - Getriebemotor Watt - Einspanneinheiten sind gezinkt - Schutzgitter - Hydraulik Aggregat - Pumpendurchfluss: 6,3 l - Leistung Hydromotor 3,0 kW - Hydrauliktank 50 l - max. Druck Hydraulikmotor 110 bar -Transport dimensions:   3800 x 2400 x 2200 mm ,1400 kg   4400 x 1600 x 2000 mm , 950 kg   1600 x 1600 x 800 mm , 900 kg   1600 x 1600 x 800 mm , 900 kg - Aufstellmasse L x B x H 4400 x 4600 x 3700 mm - Gewicht 4300 kg Option: Andruckelemente für dünnene Platten (15-25 mm) EUR 44,-/Stk Ausrichten mit 4 Pneumatischezylindern EUR 600,- Beschreibun ...

Technische Daten: - Arbeitslänge 3000 mm - Arbeitsbreite 1250 mm - Material Dicke 25 - 90 mm - Anzahl der Etagen 16 - Anzahl der Einspanneinheiten pro Fach 8 - Luftanschluss 8 bar, 1/2 \" - Motorleistung Drehvorrichtung 0,55 kW - Druck pro Einspanneinheit 1 - 12 kN - Max. Belastung pro Fach 150 kg - Pneumatik Camozzi - Elektrik Telemecanique - Getriebemotor Watt - Einspanneinheiten sind gezinkt - Schutzgitter - Hydraulik Aggregat - Pumpendurchfluss: 6,3 l - Leistung Hydromotor 3,0 kW - Hydrauliktank 50 l - max. Druck Hydraulikmotor 110 bar -Transport dimensions:  3800 x 2400 x 2200 mm ,1400 kg  4400 x 1600 x 2000 mm , 950 kg  1600 x 1600 x 800 mm , 900 kg  1600 x 1600 x 800 mm , 900 kg - Aufstellmasse L x B x H 4400 x 5000 x 3700 mm - Gewicht 4500 kg Option: Andruckelemente für dünnene Platten (15-25 mm) EUR 44,-/Stk Ausrichten mit 4 Pneumatischezylindern EUR 600,- Beschreibung: D ...

Hydraulic radial engine manufacturer Calzoni MR. 3000-F1N1N2S2NX 0401 / 46528, 656592 250 bar Used Husky injection moulding machine, type GL225RS60/50

Hydraulic radial engine Manufacturer Denison/Calzoni Type MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 bar Used from Husky injection moulding machine type GL225 RS60/50

Mechanical sheet metal scissors 3 m

Axles: 6 Control: S3 Type: M92 Load: 30 kg Range: 1080 mm Accessories: handheld programming device Attention: without cable Condition: This robot only as spare parts support is available due to his age. The industrial robot has works fine up to the disassembly.

Technische Daten: Kreissäge: - Schnittlänge / Besäumlänge 2900 mm - max. Sägeblattdurchmesser 315 mm - Motorleistung 4,0 kW - Vorritzaggregat 0,75 kW - Drehzahl 4000 U/min. - Schnitthöhe 90C/45 C 103 / 72 mm - Vorritzsägeblatt Durchmesser 120 mm - Drehzahl Ritzsägeblatt 8000 U/min. - max. Schnittbreite am Parallelanschlag 1400 mm - Tischhöhe 860 mm - Arbeitstisch 1450 x 650 mm - Tischverbreiterung 800 x 880 mm - Tischverlängerung 400 x 450 mm - Formatschiebetisch 3000 x 350 mm - Auslegertisch 640 x 1200 mm - Längen- Gehrungsanschlag eingezogen/ausgezogen 1900 mm/3500 mm Fräse: - Spindeldurchmesser 30 mm - auswechselbare Frässpindel MK 4 - Motorleistung 5,5 kW - Drehzahl 3000/4000/5000/6000/8000/10000 U/min. - Spindelhub 175 mm - Spindelschwenkung 90C bis 45C - max. Einspannhöhe 125 mm - Tischöffnung 270 mm - max. Werkzeugdurchmesser versenkbar 260 mm - max. Werkzeugdurchme ...

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

48 lfm pallet rack Stow Used goods, see pictures Height 4.6 m Depth 110 cm Beam length 3.9 m Load/compartment 3000 kg Frame blue, new Carrier orange, used goods Negotiation price: € 3,100,-- net from stock Offer consists of: + 13 pcs. frame pre-assembled, new, depth 110 cm, height 4.6 m + 72 pcs. carrier, used goods, length 3.9 m, 3000 kg load/compartment + 144 pcs. Mount fuses + 26 pcs. concrete anchors Load signs Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from v ...

; ready for operation

- Einspannmaße: H: 1600 mm x B: 2900 mm - bei Rahmen: H: 1600 mm x B: 2600 mm - 3 vertikale Presseinheiten mit verstellbaren Winkelgetrieben, 150 mm Weg, 3 to Druck, 90 Grad Anschlag - Gewicht ca. 400 kg

- Schleiflänge 3000 mm - Tischabmessung 3000 x 820 mm - Tischhub 600 mm - Kröpfungstiefe 600 mm - Kröpfungshöhe 210 mm - Rollendurchmesser 240 mm - elektrische Tischhöhenverstellung - integriertes Absauggebläse mit separatem Motor - 2 Schleifbandgeschwindigkeit 18 / 36 m/sec. - Rechts-Links Lauf - Schleifbandabmessung 150 x 8200 mm - Tisch 700 mm ausziehbar - herausnehmbares Tischsegment 640 x 640 mm für sperrige Konstruktionen wie Rahmen usw. - graphitbeschichteter Schleifschuh für minimalen Reibungswiederstand - Motor 2,4 /3,0 kW / 400 V - Absauganschluß 2 x 120 mm - Abmessungen L=4700,B=1600,H=1500 mm - Gewicht 580 kg

- Einspannmaße H=1600 mm, B=2900 mm - Einspannmaße bei Rahmen H=1600 mm, B=2600 mm für Korpusse bis 600 mm Tiefe - Rahmenpresse mit Korpuseinrichtung und zentraler Handhydraulik - Druckkraft 2,5 to / Zylinder - 4 Presseinheiten mit zentraler Handhydraulik - 1 Seitendruckeinrichtung mit 2 Zahnstangengetrieben - 4 Exzenter-Oberspanner, 4 Korpusauflagen - Gewicht ca. 450 kg

Technische Daten: - max. Arbeitsbreite 3000 mm - automatischer Arbeitsablauf X-Achse - automatische Verstellung der Z-Achse - Magnetspanntisch 200 x 3100 mm - Schleifwinkel Verstellung +/- 90C - Drehzahl Schleifscheibe 1440 U/min - Schleifscheiben FI 200 x 100 x 100 mm - Vorschubgeschwindigkeit 3 - 9 m/min stufenlos einstellbar mit Frequenzumformer - Motor 7,5 kW / 400 V - Motor Vorschub 0,75 kW - Motor Kühlmittelpumpe 90 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=3700, B=1100 mm, H=1600 - Gewicht 2500 kg

27 lfm pallet rack shepherd PR600 New and used goods, top condition see pictures. Height 4.7 m Depth 105 cm Beam length 3.3 m Load/compartment 3000 kg Field load 9000 kg Frame galvanized Carrier blue Negotiation price: € 1,750,-- net from stock Offer consists of: + 9 pcs. frame pre-assembled, depth 105 cm, height 4.7 m, new product + 32 pcs. carrier, length 3.3 m, 3000 kg load/compartment + 64 pcs. Suspension fuses + 18 pcs. concrete anchors + Load signs Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are l ...

approx. 3000 m2 steel construction stage 2-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

Furrance 300c- HERAEUS T6120 Machine is in good working condition

3000 l mixer,stainless steel,Wolfking TSM,2 shaft paddle mixer,nozzles for nitrogen.

We offer here a contour measuring device from MITUTOYO, this device received maintenance and calibration from Mitutoyo in November 2022. Included is the complete control with PC, monitor and software Formtracepak MITUTOYO Contour Measuring Machine SV-3000 CNC ROUGHNESS TESTER MITUTOYO Contracer Extrem-SV-3000 CNC SURFTEST SV-3000 CNC 178-544-2 TECHNICAL DATA Range X-Axis: 8" / 200mm Resolution X-Axis: 1.97μin / .05μm Measuring Method: RT Linear encoder X-axis Drive speed (max. CNC): 7.87in/s / 200mm/s X-axis Drive speed (manual joystick): 0 - 2.0in/s / 0 - 50mm/s Measuring Speed: .00078 - .078 in/s / .02 - 2 mm/s Traversing Direction: Backward Alpha-axis resolution: .000225° Alpha-axis rotating speed: 1rpm Column resolution: 1.97μin Column Resolution: 0.05μm Z2-axis Measuring Method: RT Linear encoder Cjycziziin Column Z2-axis drive speed (max. CNC): 7.87in/s ...

It sells machine revealing pieces of meat of the brand MAJA, model EVM 3002. Built in stainless steel in its entirety. Used equipment completely revised, with guarantee and in prefect condition. Characteristics: cutting width 440 mm, external measurements of the machine 830 mm wide x 620 mm deep x 1000 mm high, working height 960mm. Average speed 30m/min, air pressure 6bar/10bar, weight 180kg, voltage 400v 50Hz, three-phase, 2.2 A, 0.75 Kw. Meat shaper , bark peeler, meat peeler, fish peeler, cephalopod peeler. Practically new re-release team. Reviewed and guaranteed. NEGOTIABLE PRICE, transport costs on behalf of the buyer. If you need any information, more photos, videos and do any kind of test in our exhibition pavilion. Contact by phone, one of our experts will gladly assist you in a personalized way and make you the best offer. If you are really interested in the team, call us at ou ...

Manufacturer: Linde Type: P30 Load capacity: 3000 kg Battery voltage: 24 V Weight without battery: 435 kg Battery weight: 230 kg Dimensions: 1530x740x1500 mm Operating hours: 8724 hours Year of construction: 2005 Without battery!

Servo motor with brake, permanent magnet motor AMK DYNASYN DV5-2-4 DBF 0,69 kW 3000 / 10000 rpm 190 V IP54 Shaft diameter: Ø 19 mm shaft length: 40 mm groove width: 6 mm Flange diameter: Ø 95 / 110 x 110 mm bolt circle diameter: Ø 115 mm hole diameter: Ø 9 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 400 x 115 x 142 mm

Filter cartridge, hydraulic filter insert EATON 300089 Inner diameter: Ø 23 mm outer diameter: Ø 44 / 45 mm Total lengths: 170 mm Length (filter jacket): 157 mm Material connection flange: plastic, metal New ! Dimensions: 170 x 45 x 45 mm

Filter bowl, maintenance glass, 2 pieces CKD 3000E-BOWL-J diameter (filter container): Ø 47 / 59 mm ( inside / outside ) material ( filter container ): Polycarbonate New ! Dimensions ( single filter tray ): 115 x 59 x 59 mm

Filter cartridge, hydraulic filter insert INTERNORMEN 300073 inner diameter: Ø 21.5 mm outer diameter: Ø 43 / 46 mm Total lengths: 109 mm length (filter jacket): 87 mm Material: plastic ( connection flange), stainless steel ( lid, net ) New ! Dimensions: 109 x 46 x 46 mm

Servo motor, permanent magnet motor SIEMENS 1 FS5044-0AF01-0 ( 1FS5044-0AF01-0 ) 1.15 Nm 0 - 3000 rpm 0 - 150 Hz shaft diameter: Ø 14 mm flange: 93 x 93 mm New Dimensions: 320 x 95 x 155 mm

Platform, with one step PAGUS 3000 x 900 mm with rubber mat Working height: 400 mm Dimensions: 3100 x 900 x 1300 mm

R-C combination HARMUTH ELEKTRONIK 300012 400171 spare part for machining center HECKERT CWK400 D ! used ! Dimensions: 78 x 45 x 52 mm

R-C combination HARMUTH ELEKTRONIK 300063 960315.3 spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 78 x 25 x 85 mm

R-C combination HARMUTH ELEKTRONIK 300012 960265.10 spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 78 x 40 x 85 mm

Twin tube emitters, infrared twin tube emitters, with gold reflector HERAEUS 34654 3000 W 230 V twin pipe: length: 650 mm width: 24 mm height: 12 mm used, tested ! Dimensions: 700 x 40 x 30 mm

Solenoid coil, for globe valve cartridge FLUTEC 3005737 12 V DC 8 Ohm Inner diameter: Ø 16 mm Length: 50 mm New ! Dimensions: 50 x 37 x 63 mm

Safety control PILZ PSS SB 3006-3 DP-S ( PSSSB3006-3DP-S ) 301600 used, tested ! Dimensions: 245 x 125 x 185 mm

Servo motor with brake, permanent magnet motor SIEMENS 1FT 5064-1AF71-4AB0 ( 1FT5064-1AF71-4AB0 ) 3000 rpm IP64 375 V shaft: Ø 19 mm used, tested ! Dimensions: 340 x 150 x 115 mm