300 kw to used for sale

A nice condition Akebono paper strapping machine with floor trigger. Including 5 rolls of repro paper rolls.

filling capacity: drum diameter: - mm wall strength: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm saw band length: 3660 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: round: 290 mm capacity 45 degrees: flat: 260 x 280 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: flat: 180 x 170 mm coolant capacity: ca. 100 l Control: SPS total power requirement: 2.4 kW AC weight: 904 kg range L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in  ...

CNC Laser Cutting Machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of Make: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 KW Processing area: 3,000 x 1,500 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 8 mm Sheet thickness aluminium (max.): 8 mm Working Temperature: + 10 to + 30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet left Æ 250 mm Laser Source IPG Ytterbium Laser System YLS 2.5 kW Laser Chiller LC 170.01-A.3.5 Voltage: 400V/3P/50Hz Filter system TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 mm x 3,610 mm

Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.

Offer 25514 Specifications: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2700 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

Dimensions (L/W/H): 2200x1500x1580 mm Weight: 2300 kg Total power requirement: 40 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4590x1100x2500 mm Weight: 1000 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 870 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1240x950x1650 mm Weight: 435 kg Total power requirement: 4,65 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1680x930x1200 mm Weight: 350 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x2900x850 mm Weight: 1280 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1930x1580x1580 mm Weight: 2250 kg Total power requirement: 32,57 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4700x1600x1500 mm Weight: 580 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x950x1260 mm Weight: 400 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. working width: 300 mm number of brushing / polishing units: 2 st. Feed speed: 10 m/min. Max. diameter of brush / polishing rollers: 190 mm motor power per brush / polishing roller: 4,65 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2900x1800x1100 mm Total power requirement: 0 kW Weight: 550 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Stationary industrial vacuum cleaner Power 2.2 KW Air flow rate 300 m/min Suction port 40/50 mm Weight 30 kg

General SKU330W711 LocationBarneveld MakeCollette Gral Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor18 KW Specified Features - Universal mixer Universal mixercheck Capacity300 l., (260 l.) Vessel sizesDia. 840x600 mm With covercheck InletDia. 150 mm Pneumatic operated outletcheck OutletDia. 200 mm With jacketcheck With motor18/12 kW, 380 volt, 1465/975 rpm With lump breakercheck With motor7,5 kW, 380 volt, 2930/1460 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4435 (316L) Information Type300 Ex Pro high shear MR103 Mach.No.……. Year of construction1999 Mounted on framecheck Floorspace1,20x2,50 m Total height2,55 Extra SpecificationsHydraulic unit, 15 kW, 380-415 volt, 1420 rpm 2-doors control cabinet Universal mixersColletteMixers > Universal mixersBrand > Collette What you can expect fro ...

Key data: 340 mm, 2000 mm

Emco Emcomat E-300 2-Axis Teach-In/Cycle-Controlled CNC Lathe CNC control Fagor 8055 i Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2,500 rpm X-axis travel 310 mm Travel Z-axis 2000 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Properties Volume 22300 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4300 mm Height 2370 mm Diameter 3000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20° C

Properties Volume 22300 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4300 mm Height 2370 mm Diameter 3000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20°C

Another great deal for you: PERI PEP 20-300 floor props in ⭐⭐  star quality! 👀 All advantages at a glance: individually tested - the thread can be opened and screwed together long service life thanks to hot-dip galvanizing extension length from 1.71m - 3.00m permissible support load of 20kN 💡 42 props are supplied in 1 PERI stacking pallet 1.20x0.80m. This is already included in the total price. Price: from € 1239,00 / Stapelpaletten (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. 27.00 x Floor prop PEP 20-300, galv. (Art-No. 103058), 2 stars, € 1.239 / pc

Features: Total height 1600 mm Length 2600 mm Width 1900 mm Description: M.Nr.: 1699 334 Drum speed: 3,700 rpm Solids: 3.5 kg/dm3 Engine data: Type: 180 M-4/2; 380V; 35/46 Amp.; 16.5/22 kW; 50 Hz. Dimensions decanter: Length: 2,600 mm Width: 1,000 mm Height: 1,600 mm Pump dimensions: Length: 1,900 mm Width: 950 mm Height: 830 mm

An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible.

Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw max. 24.000 upm Toolchanger 6 positions HSK 63 F Total installed power 70 kw Weight approxm. 9,5 tons - Producer Intorex - Type TMC 3000 - Year of construction 2010 - Location Germany

A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

power capacity: 30/37 kW volt: 380 V ampere: 70/78 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3000 mm width: 2000 mm height: 250 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 2 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

CONTROLS   CNC controls MAZATROL SMOOTH X BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1 WORKING RANGE TURNING   turning diameter (max): 658 mm   bar diameter (max): 80 mm   worpiece length max.: 1519 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   drive power: 30 kW   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 4000 /min   drive power: 26 kW   c-axis: yes X/Z SLIDE   Z-axis travel: 1585 mm   X-axis travel: 615 mm   Y-axis travel: 250 mm   rotating range B-axis up to: 210 °   rapid traverse Z: 50000 mm/min   rapid traverse X: 50000 mm/min   rapid traverse Y: 40000 mm/min X/Z SLIDE   rotating range B-axis up to: 0.0001 °   - rotat ...

: neu : ca. 4 Monate ab Auftragse : Italien : 120000 € : 2268 € : 300 to : 500 mm : 1000x500 mm : 1200x800 mm : 600 mm : 400 mm : 22 mm/s : 2 mm/s : 7.5 kW : 2300 mm : 1500 mm : 3100 mm : 11200 kg 4-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve � ...

Under-table cross-cut saw Emmegi type Calvet 300 M Technical data: with automatic stop Fence pushes the material to the cutting position after entering dimensions Saw blade: coming from below Saw blade diameter max. (mm): 300 Right long table: with automatically movable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length - 3550 mm, roller conveyor width - 310 mm Roll width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without pictured suction

Falch Trail Jet 15 As good as new 300bar 24l/min Hot water 228 Hours 6 months warranty Price plus VAT CLIC Industrial Rental For 20 years, we have specialized in the field of high pressure, trade, stone cleaning, industrial cleaning and much more. Available throughout Europe Headquarters Austria AT Depot 1 Euskirchen DE Depot 2 Rotterdam NL

It is a used Funk flake ice machine C 300 for sale. The machine is checked and fully functional. The machine is in very good condition. Daily output up to 300kg flake ice. Price on request.

Stock# U2376-4 Used stainless steel twin shaft paddle mixer by Alco Food Machines (DE) model AMP 300-S with total volume of mixing chamber 330 l. Working volume of mixing chamber about 230 l. Mixing chamber has internal dimensions L 900 mm x W 805 mm x D 535 mm. Top open. Machine is equipped with two mixing shafts, each driven via gearbox and el motor 0.9/1.5 kW, 705/1415 rpm, 380/400V, 50 hz. Each shaft is equipped with two half-ribbons and seven mixing paddles. Discharge through front wall two discharge outlets, each equipped with stainless steel lid, operated pneumatically. Machine is mounted on four stainless steel legs and is equipped with local control panel. Last time used in food industry.

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Universal Components Mixer EM 300 in stainless steel, Fabr. MTI Detmold / Germany, built in 1997

Universal Components Mixer in Stainless Steel, Type EM 300, Fabr. MTI Detmold Germany, built in 1997

FOR SALE GAS TURBINE Tempest SGT300 packaged 7941 kva year 2000 50 HZ VOLT 11 000

Pleiger hydraulic motor for Krauss Maffei MOS 3000-05-204 Krauss Maffei No. 6249672

- Forming rolls R30/40/50/60/70/80/90/100 - Under power good running order - Documentation drawings availebel -  

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.